AutoCad :: Works Slow Unless Extend View On External Monitor
Jan 13, 2014
I installed AutoCAD on a brand new Lenovo W530 with 2 graphic cards: Integrated Intel and Nvida K2000M. When I just work on the built in screen AutoCAD does not seem to work well, the mouse movement lags. The problem is gone immediately when I simply extend my desktop onto an external screen.. That is all I do : FN key + projector icon, choose extend desktop and enter -> AutoCAD works great.
Here is some background info / things I have tried:
1) I disabled Nvidia Optimus in BIOS to makre sure all graphics is on the Nvidia (i.e. disable integrated graphics) -> this did not solve the problem, also after applying the extend desktop trick
2) In the Nvidia 3d settings I made sure that AutoCAD works with the Nvidia card.
3) Nvidia drivers are upto date
4) When I open AutoCAD it appears in the nvida window (in the taskbar) that shows which programs are used by nvidia
5) After extending the desktop I stay with AutoCAD on the builtin screen
View 6 Replies
ADVERTISEMENT
Aug 14, 2012
A problem i have encountered with LT 2011 is the extend or trim command freezing/taking a long time to extend or trim.
If i zoom up close, extend/trim works as normal instantly, but if i zoom out further & try the same extend/Trim it can take 30 seconds or more.
I dont remember having this issue on previous LT versions, I've found this with many if not all drawings
View 1 Replies
View Related
Nov 26, 2013
I am facing problems with my autocad when i import Revit drawing to it. The file start working extremely slow, and crashes often.
View 1 Replies
View Related
Sep 21, 2011
I have dual monitors . today i tried maximized space on main monitor by placing command line on 2nd screen .
Strangely when i do that , autocad is slowed down . any command has a lag of about a second i usually have adcenter and toolpalettes on 2nd monitor with no problem .
View 3 Replies
View Related
Aug 8, 2013
Dabbler using 3ds Max Design. Mapping image on to a plane - Rendering from Perspective window:
'Rendering' from Front View window:
View 4 Replies
View Related
Dec 8, 2010
I am using a pdf file as an xref however while panning/zooming and some other basic commands, the response is really slow.I have already tried using a jpg file but I loose the ability to grab the end point of a line. I am able to grab the end point of a line while using the pdf.
I have 4 GB of ram and nothing else open, so I cannot see this being the problem
View 9 Replies
View Related
Dec 29, 2012
I have an Eizo external monitor connected to my MBP and use the external for editing. I have been doing so for a couple years now and with all versions of Lightroom (even 4.2). I have always been able to see the changes/edits real-time on the external monitors when adjusting something with one of the LR sliders. Ever since I installed the latest LR update (4.3)- I don't see changes realtime. I have to wait until I let go of the mouse/slider to see the changes/adjustments.
View 1 Replies
View Related
Feb 10, 2014
Mid-job (and of course now that I need to color correct), PP CC has stopped exporting video to my external monitor. I have tried trashing prefs (holding Shift+Opt at start-up) and it doesn't do the trick. In looking around, I've noticed people having this problem when using some BlackMagic cards, but my monitor is plugged directly into the Thunderbolt connector of my MacBook Pro. I've enclosed my Playback settings.
Oddly enough, when I fire up my old copy of PP CS6 it plays back to my external monitor just fine.
I've had had enough late-night edits that I may have inadvertently initiated some keystroke that changed a setting, but I can't think of what that would be or why a Preference Trash wouldn't reset it.
View 3 Replies
View Related
Jul 10, 2013
I have an external Cinema Display plug with Thunderbolt, but this one don't appear in the external monitors list in the settings menu. I have only access to Firewire output.
View 2 Replies
View Related
Oct 29, 2013
I'm using two monitors with LR5, and the second monitor is the preview screen. I find the preview on the second monitor to be painfully slow in both the Library and Develop modules:
1) If I am the Develop module, and I move to the next photo, and zoom the preview to 100% (or if it is already at 100%), it take a minute, literally, for the preview to display correctly.
2) In the Develop module, sometimes the display does not update correctly at all. If I adjust a slider on the Details tab, however slightly, the preview then updates almost immediately.
3) In the Library module, if I switch the main window to single photo view, and view 100%, then, as I browse the photos, the main window updates very quickly, but the preview window lags behind.
I'm working with Fuji X-Trans RAF files, and this maybe this si the issue? JPGs update almost immediately in the preview window in both modules.
View 2 Replies
View Related
Dec 26, 2012
I want to extend sampleline along matchline for creating cross section view.I used Modify-extend in hometab, but it doen't work.
View 2 Replies
View Related
Apr 20, 2012
I use a MBP connected it to an Apple Cinema Display used as an external monitor (not a dual display) when in my studio.
When I use Adobe Photoshop CS 5 without the monitor the image window does not display on the MBP. If I plug the external monitor in, the window is displayed correctly on the MBP. Photoshop is opening and "displaying" the image window offscreen. Nothing gets it back onscreen, except plugging in the external monitor.
I often use Photoshop away from my studio so this is a big problem. PShop is essentially unusable unless connected to an external monitor.
View 2 Replies
View Related
May 23, 2013
I'm just about to order a BM card for video monitoring but looking for connection setup that allows me to get both video monitor and external display from my macbook pro?
View 2 Replies
View Related
Feb 7, 2013
When I drag the ribbon over to my 2nd monitor the configuration of the ribbon changes to a tabbed display. Is there a way to keep the tool type view of the ribbon (panel) on the 2nd monitor?
BTW...this is in drafting & annotation view.
View 0 Replies
View Related
Sep 19, 2012
When I am in ISO view and chose anything other than wireframe, like "Realistic" panning and zooming are very slow. Even a smaller drawing does not act normal. I use a 3rd party software for modeling ductwork and piping, the drawings work fine on our other machine, so it's not the modeling software. It's also not the drawing file, I have tried other drawings that I had no past issues with but it still bogs down.
I have tried the following:
Updated video driver.
Tried different settings under "Options" "Display" and "3D Performance"
Ran AutoCad repair.
Checked and turned off all snap settings and grid.
AutoCad 2011
Intel Core i5 3.60 GHZ
16GB ram
Windows 7 Profesional 64 bit
NVIDIA Quadro FX 1800
View 2 Replies
View Related
Aug 20, 2012
I need to view a block definition from an out-of-process app (written in C#).
The app uses True View Acctrl to as a viewer.
It works fine for whole dwgs, but when it comes to viewing just one block definition' the best I could come up with was:
<pseudo code>
start a new Autocad instance;
open the dwg in Autocad;
perform a Wblock of the block definition to some temporary file;
open and view the file in the Acctrl;
erase the temporary file;
</pseudo code>
It seems clumsy though.
Is there any API for doing this? (preferably not higher than Acad 2008)
View 4 Replies
View Related
Sep 11, 2012
is it possible to lock grid view to let's say the left (low grade) monitor and loupe (or any other view) to he right hi quality monitor without automatically switch the mode on the left when switching the view on the right monitor?
View 4 Replies
View Related
Aug 13, 2006
Here is the needed information:
Equipment: Windows XP system; Dell E773c monitor; Photoshop CS2; Canon i950; Nikon D70
Steps taken so far:
1) Set Nikon D70 to Adobe RGB color space
2) Calibrated monitor using Spyder2 Pro
3) Downloaded printer profiles that match paper being used
4) Followed instructions for Print w/ Preview: Adobe RGB applied; Photoshop determine colors; select printer profile; rendering intent- perceptual
So I think I did everything right. The printed picture is off in several tones and comes off darker feeling all together.
What can I do differently to make the output match the monitor?
View 3 Replies
View Related
Sep 22, 2013
I've an Intel i7 with 4 cores, 3.6 GHz and enabled Hyperthreading. Also I've 24 GB RAM. My monitor has a resultion of 2560x1400 pixel. I configured in Lightroom 5 to have a standard preview size of 2880 pixel. During the import I let Lightroom generate all preview in standard size.
So some days later I wanted to review my picture in full screen mode. At first I saw just a blur picture, after 2-3 seconds it was a little bit sharper and after additional 2 seconds it was sharp. So I've to wait 4-5 seconds per picture, before I can see a sharp image.
View 2 Replies
View Related
Nov 4, 2013
How do I view and process photos kept on an external drive?
View 2 Replies
View Related
Nov 12, 2012
I have been editing and saving pictures on lightroom 3 to an external hard drive while working off an old laptop. I just recently bought a new computer and installed lightroom 3. How do I view and edit the same files on the external hard drive from the new computer?
View 8 Replies
View Related
Dec 20, 2013
Why can't I drop a clip in the Program Monitor from the Source Monitor in Premiere? When I try to move a clip from the Source to the Program Monitor, a hand displays with the "circle with a line through it" symbol.
View 2 Replies
View Related
Apr 17, 2014
How can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies
View Related
Oct 11, 2012
What is the best way to get consistent color from one monitor to another. Is that even possible?
View 6 Replies
View Related
Dec 3, 2013
`How can I extend the red "peg" in the attached model, by 8 mm either side? (I created it as a sweep)
View 3 Replies
View Related
Jul 23, 2013
I am trying to get a window (dynamic block) in a wall. Short Window.jpg I can get it to rotate to the axis of the wall. I can get it to fit the thickness of the wall. I am darned if I can get it to fill the full 2m allocated (upper solid line).
It seems a window can only be 1.5m wide, but that seems a bit odd. How di I control this?
View 9 Replies
View Related
Aug 23, 2013
how to make my photshop application fast few days ago it was working good but now its performance is slow and my computers speed is also slow. How to fix it?
View 1 Replies
View Related
Aug 30, 2011
I moved to a new PC the other day and have not been able to extend or trim to a line that is not connected. I figured it would be an apparent intersection but maybe I haven't got my settings right as it's not working. I am having to drag the lines right now and it's not very accurate!
View 2 Replies
View Related
Jan 22, 2012
how to extend a solid object. You can see at the picture that I attached what I mean and also I will try to explain. I draw a fence 1.5 m high. At one specific part of the yard I want the fence to be 2.0 m high. So I moved upper part (horisontal) of the fence to the height of 2.0 m. Now I want the 2 vertical poles to "extend" to that height. Now I can delete those poles and use extend command from the bottom and then use silce command. I was just wondering if their is a command that I can use to grab the pole as it is now and pull it up to the new height if that is possible without erasing it.
View 9 Replies
View Related
May 9, 2011
I am wondering if there is a function that takes two lines that are not parrallel and will extend them until they intersect?
View 9 Replies
View Related
Aug 31, 2011
These polylines will not Trim or extend to the arc. Works fine if I Explode them to lines. Z=0 also.
View 4 Replies
View Related
