3ds Max :: Render Output Works From Perspective View But Not From Front View?
Aug 8, 2013Dabbler using 3ds Max Design. Mapping image on to a plane - Rendering from Perspective window:
'Rendering' from Front View window:
ADVERTISEMENT
AutoCAD Civil 3D :: 2013 / Changing TOP View To TOP-Front View For 2 Overlapped Points
Sep 23, 2013I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View RelatedRevit :: How To Keep View Same But Change Scale Of View / Perspective
Jun 18, 2012I am working with a seris of 3d views that I want o make bigger. How can I do this.
I want to keep the view the same but changed the "scale" of the view/perspective
3ds Max :: Exit Isolate From Camera-view Changes To Perspective View?
Jul 10, 2012leaving the isolate mode in a camera view (3dsmax-camera or vrayphysical-camera) changes the view from cameraview to perspective view. Am I missing any new setting or ist this a bug...
View 3 Replies View RelatedRevit :: Rendering 3D View - Roof Disappears In The Render View
Feb 18, 2011I am a new user to this may seem simple. When I render a 3D view the roof disappears in the render view, but when I switch to show the model it is there.
View 6 Replies View RelatedAutoCAD Architecture :: Copy Layer In Top View To New Layer In Front View
Nov 11, 2011New to AutoCAD. Designing a building in plan. Then used the plan to draw a section in new layer, but still in plan view. Is there a way to copy that section onto a new layer in front view and erase the old section layer? .
View 1 Replies View RelatedRevit :: Unable To Render The View Due To Unknown Error During Render Calculations
Aug 1, 2012I keep getting a dialogue box that says "Revit was unable to render the view due to an unknown error during render calculations. The rendering operation will be canceled." The only option is to click "close" and when i do so, it continues to render but only the sky and grass. My buildings are not present.
View 2 Replies View RelatedAutoCad 3D :: UCS - Using Two Viewports (One In Top And Other In Front View)
May 28, 2013I have experience making 3D models in Vectorworks but have never used 3D in AutoCAD. I am using 2014 version. I understand the principle of UCS and the idea behind it but am really struggling to use it.
Currently I am trying to use two viewports, one in top view and one in front view.
I am trying to use the two to ensure I am placing objects in the correct place in relation to everything else. However...how comes when I move something up or down in front view it moves completely out of position in top view? surely if i'm moving the object up or down it should not effect the position of anything in top view?
AutoCad :: Dimensions Not Visible In Front View
Aug 9, 2012i have a problem of net being able to view dimensions in the model space in the current view. i was not paying attention to what view i started the 2d drawing in, but right now it is in the front view. the dimensions lines gets put on a plane that the program has decided and wheather i try to dimension above or below it, it goes to that line. i have also noticed that for some unknown reason the 2d drawing gave itself depth. it is a very large drawing and i have tried to clip parts of it to put on a new drawing it defalts to the front view and i still cannot dimension on it.
I am using arch 2009, and the program did get corrupt during my work and had to reinstall. i have reinstalled several time with the same result. i have tried arch 2011 also with the same result. i think there is a setting that somehow changed and i can't figure out what it is, or should i chalk this up to a program malfunction and start from scratch in a top view (which works fine).
GIMP :: Rotating Front View Of Tire
Dec 6, 2013I am looking for a way to make front view of a tire look like it's rotating ... i.e. the tread is moving. I have tried moving the tread, but that didn't look right.
I have seen it done but can't recreate it. I have attached an example .
AutoCAD Inventor :: Find Top / Right And Front View Through Tools
May 22, 2012I have managed to find the Top view, Right view and Front view through the Tools>customisation option, but cannot find Left, top or rear view.Where are they?
View 6 Replies View Related3ds Max :: Field Of View Change In Perspective?
May 15, 2013If I'm working in any orthographical view (Front, Top, etc.) and I'm switching to perspective, field of view is not 45 degree and it randomly changes.
Is there any "cure" for this?
3ds Max :: Perspective View Grid Snap
Oct 18, 2012I have a problem with the z axis snap along grid points and lines in the perspective view, now i know that there isn’t a z grid visible but surely there is one non visible (like the z grid in the 2d views)that i can snap too. When i try to snap to points and lines in perspective mode, is the Object or sub-object just slams down to the grid and doesn’t move from there.
View 2 Replies View RelatedRevit :: Creating 3D Perspective View?
Jan 14, 2012I want to see my model with perspective, or better yet create a rendered view with perspective, but the instructions given within the program not useful, they run: 'Drag the cursor to the desired target and click. Revit Architecture creates a perspective 3D view and assigns a name to the view: 3D View1, 3D View2, and so on. To rename the view, in the Project Browser right-click it, and select Rename.'
Dragging and clicking like that selects an object, as I expected it would, there is no sign of an sort of perspective or saved image file, so what do I really do?
Revit :: Resize Perspective View
Apr 25, 2012We have a perspective view which we need to resize so that the building takes up the entire sheet for presentation purposes.
View 4 Replies View RelatedAutoCad 3D :: View From Perspective Of Light?
Oct 5, 2012Is there any way to get a viewport to show the view of a spot light? This was possible in 3DStudio at one point, can it be done in Autocad? fyi I'm running Acad '13 right now.
I'm trying to get my shadows to line up and hit certain points, and it would be a lot easier if I could adjust it from the perspective of the light, similar to a camera view (hmmm, maybe I'll just set up a camera).
Just want to now if that option is out there and available.
Revit :: 2013 - Transparent Material Pushed To Front Of 3D View
Apr 24, 2013My transparent materials are being pushed to the front of 3d view in Revit 2013, how can I fix it?
View 1 Replies View RelatedAutoCAD Inventor :: Custom Front View Isn't Reflected In DWG File?
Feb 24, 2013Ive been using inventor for around 2 months now and its all been going good... ive recently done a rather complex assembly that id rather not redo... unfortunately... i ungrounded the base part fiddling with it trying to find a working constraint set for my needs (evenly spaces cylinders on a base plate and a centered on a mounting plate... i ended up using holes and the cylinders screw holes to align them but still this was AFTER i messed it up)
So now because of that the default view is skewed by roughly 45 degrees or so... now i have set the front view manually to reset the ground plane.... but if i stick this in a dwg as front its as if i did nothing... and yes i have triple check to make sure ive set the front view.
AutoCad 3D :: Flat DXF File To Make Top And Front View Of Model
Sep 27, 2012I have a dxf file of a 3d model (cant attach as it exceeds the size limit) that I need to have put in a 2D dwg file. basically I need to flatten it to make a top and front view of the model.
I haven't work in 3d in some time and never worked with dxf files, so I'm not even sure this is possible. I tried opening the dxf in auto cad, but it doesn't seem to find the file..I cant see dxf extensions.
Mudbox :: How To Make Perspective View To Move
Nov 1, 2013I just started to use mudbox for a class assignment, and I am having trouble getting the views to move. I'm usedto 3DS max where all I had to do was holde down the mouse wheel and drag, but I am not getting the same effect in Mudbox.
View 1 Replies View RelatedRevit :: Perspective View With Ghost Lines?
Jan 27, 2012I am doing a building as shown in the attached image. I inserted the file as a link and flipped to make the total building, but in the perspective view are showing these ghost lines that do not let me save a shaded image of the building. I have just updated the graphic driver to the certified by Autodesk.
View 2 Replies View RelatedAutoCad 3D :: Viewing Models In Perspective View
Feb 11, 2012If there is a way to view your 3d model in perspective view in model space.
View 4 Replies View RelatedAutoCAD 2010 :: Rotating Survey Text And Points To Front View
Oct 30, 2013I have been capturing data for measured building surveys with a Leica total station (TS06). When I upload the data into autocad i can see the node points (+) and text in the top view. When switch to look at the points from the front view (to produce an elevation), the text and points appear as a flat line, although the insertion point of the node/text is still correct. I need to find a way of rotating the text and points so they are visible in this view. I will then flatten the points and cut them to the top view to produce a 2d elevation.
we had a toolbar with a button to perform this function. However, now i don't have the toolbar,
AutoCAD 2013 :: Couldn't Dimension 3d Models From Side And Front View
Jun 23, 2013i have been drawing a 3d model and when it comes to dimensioning, i can only do it for the vertical and horizontal distance from the top view. i cant find a way to dimension the thickness of my model from the side or ront view.
how do i change the settings for this..
AutoCad :: Works Slow Unless Extend View On External Monitor
Jan 13, 2014I installed AutoCAD on a brand new Lenovo W530 with 2 graphic cards: Integrated Intel and Nvida K2000M. When I just work on the built in screen AutoCAD does not seem to work well, the mouse movement lags. The problem is gone immediately when I simply extend my desktop onto an external screen.. That is all I do : FN key + projector icon, choose extend desktop and enter -> AutoCAD works great.
Here is some background info / things I have tried:
1) I disabled Nvidia Optimus in BIOS to makre sure all graphics is on the Nvidia (i.e. disable integrated graphics) -> this did not solve the problem, also after applying the extend desktop trick
2) In the Nvidia 3d settings I made sure that AutoCAD works with the Nvidia card.
3) Nvidia drivers are upto date
4) When I open AutoCAD it appears in the nvida window (in the taskbar) that shows which programs are used by nvidia
5) After extending the desktop I stay with AutoCAD on the builtin screen
AutoCAD 2013 :: 2 Point Perspective View Of Model
Jul 9, 2013Im currently trying to set up a 2 point perspective view of a model ive recently designed.
I have an image set as the background and i would like to align the model in perspective to the image.
My issue is Dview and free orbit and giving me any kind of reasonable perspective.
Is there any other methods i might be able to try to improve the results ?
AutoCAD Architecture :: Perspective View Turns Isometric
Jun 21, 2011I have Autocad Architecture 2011 and it was working perfect until Yesterday. I Repair and then Reinstall but still the same problem.
When I have a Parellel (isometric) View and transfer to perspective works well but when I exit from the orbit function everything disappear and the cursor become crazy. I push pan and appears the drawing I release pan and the drawing disappear. The same problem in a viewport. I setup the perspective view on the viewport, lock the v-port, save and close the drawing, then open the same drawing and the perspective view become Isometric.
AutoCAD 2013 :: When Saving Switches To Perspective View
Mar 21, 2013On some 3D models, when I save the drawing, it automatically switches to perspective view and turns the sky background on. This is irritating.
I found this old thread in the AutoCAD Architecture area from 2010
[URL]....
Even setting the sky background to 1, then 0 doesn't work. When I save, it reverts to a perspective view and turns the sun/sky back on.
AutoCAD MEP 2010 64 bit
Revit Architecture 2010
Windows 7
Maya :: Rotation Axis Locked In Perspective View?
Apr 23, 2011I've been using maya since 8.5 and there's a notorius bug that will probably be never addressed by maya developers. I just upgraded to 2012 and am getting this again: // Warning: Could not find an appropriate startup camera: side. A substitute will be used.
And i took all the preventive actions: window size and position are not saved with file, i always go back to four view before saving, etc. Still no joy.
In fact the side camera is not missing, it's right there and fully functional. What happens as a consequence of this error is that one of the rotation axes in perspective view are locked, i can't rotate my scene around the Y axis.
It doesn't work either if i export my object and import it back into a fresh scene. Axis remains locked. I'm losing my scenes that i've put insane amount of work into. No hope to restore them.
AutoCAD Architecture :: Switches To Perspective View When Saving
Dec 6, 2010When saving (ctrl+s) or switching between layout/model ACAD 2011 changes view to perspective and 3D wireframe. This occurs only in some drawings.
View 3 Replies View RelatedAutoCAD 2010 :: Perspective View Distorted When Rendered
Jun 13, 2012I am having a problem with a view being shown rendered.
I have a tall piece of material handling equipment that is drawn to scale and is approximately 30' tall. When I render the view and take a shot of it, it looks angled based on the camera angle, when in reality it should appear straight (see attached picture).
How do I get this to look correctly?
