AutoCAD Inventor :: Custom Front View Isn't Reflected In DWG File?
Feb 24, 2013
Ive been using inventor for around 2 months now and its all been going good... ive recently done a rather complex assembly that id rather not redo... unfortunately... i ungrounded the base part fiddling with it trying to find a working constraint set for my needs (evenly spaces cylinders on a base plate and a centered on a mounting plate... i ended up using holes and the cylinders screw holes to align them but still this was AFTER i messed it up)
So now because of that the default view is skewed by roughly 45 degrees or so... now i have set the front view manually to reset the ground plane.... but if i stick this in a dwg as front its as if i did nothing... and yes i have triple check to make sure ive set the front view.
View 4 Replies
ADVERTISEMENT
Sep 27, 2012
I have a dxf file of a 3d model (cant attach as it exceeds the size limit) that I need to have put in a 2D dwg file. basically I need to flatten it to make a top and front view of the model.
I haven't work in 3d in some time and never worked with dxf files, so I'm not even sure this is possible. I tried opening the dxf in auto cad, but it doesn't seem to find the file..I cant see dxf extensions.
View 9 Replies
View Related
May 22, 2012
I have managed to find the Top view, Right view and Front view through the Tools>customisation option, but cannot find Left, top or rear view.Where are they?
View 6 Replies
View Related
Sep 23, 2013
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies
View Related
Aug 8, 2013
Dabbler using 3ds Max Design. Mapping image on to a plane - Rendering from Perspective window:
'Rendering' from Front View window:
View 4 Replies
View Related
Jul 26, 2013
When I do a detailed set of drawings I first start with the overall and ballon the part showing the BOM. The following pages will reflect the detailed parts balloned on the first page. Is there a way, without haveing to manually type in the BOM, to reference which page this detail is on in the BOM?
View 9 Replies
View Related
May 28, 2013
I have experience making 3D models in Vectorworks but have never used 3D in AutoCAD. I am using 2014 version. I understand the principle of UCS and the idea behind it but am really struggling to use it.
Currently I am trying to use two viewports, one in top view and one in front view.
I am trying to use the two to ensure I am placing objects in the correct place in relation to everything else. However...how comes when I move something up or down in front view it moves completely out of position in top view? surely if i'm moving the object up or down it should not effect the position of anything in top view?
View 9 Replies
View Related
Sep 10, 2012
How can I look at a plane in custom view like I used to be able to do? I need to rotate a part to its "straight on" view.
This is from within an inventor drawing. You used to be able to select user work planes and origin planes to change the view to.
View 2 Replies
View Related
Jan 6, 2012
I have a program that create a bunch of new custom Iprop in each part of an assembly.
How can I show all those new properties when I open the BOM in the assembly file. Manually I can add a custom column but that is time consuming. Is there a way I can create a macro that will add those custom column in the BOM view?
View 1 Replies
View Related
Dec 5, 2013
I found some code to add labels such as "Top View" "Left" view etc. to view labels, but it's not quite what I'm looking for. I'm OK with the default "View 1" and "Scale 1/4" that comes up on the multiview but I want the view label to say something like "Flat Pattern" and "Scale 1/4" when I do a flat pattern and same for ISO. How to accomplish that with iLogic?
View 1 Replies
View Related
Aug 9, 2012
i have a problem of net being able to view dimensions in the model space in the current view. i was not paying attention to what view i started the 2d drawing in, but right now it is in the front view. the dimensions lines gets put on a plane that the program has decided and wheather i try to dimension above or below it, it goes to that line. i have also noticed that for some unknown reason the 2d drawing gave itself depth. it is a very large drawing and i have tried to clip parts of it to put on a new drawing it defalts to the front view and i still cannot dimension on it.
I am using arch 2009, and the program did get corrupt during my work and had to reinstall. i have reinstalled several time with the same result. i have tried arch 2011 also with the same result. i think there is a setting that somehow changed and i can't figure out what it is, or should i chalk this up to a program malfunction and start from scratch in a top view (which works fine).
View 9 Replies
View Related
Nov 11, 2011
New to AutoCAD. Designing a building in plan. Then used the plan to draw a section in new layer, but still in plan view. Is there a way to copy that section onto a new layer in front view and erase the old section layer? .
View 1 Replies
View Related
Oct 11, 2011
In my neverending battle to find a way to turn off unneeded components in an assembly, I'm trying my hand at modifying component visibility with a custom View Rep. View reps seemed to pose fewer issues than LOD's (in that you can have a drawing and model open at the same time without a million error messages)......until I tried to make a pattern.
When first placing a new subassembly component into an assembly, it will automatically place in the "Last Saved" View Rep. Since certain parts may be invisible in my "skeletal" subassembly, this is ideal. HOWEVER, when I try to pattern this subassembly, all of the occurrences absolutely insist on displaying at the "Master" View Rep. This makes no sense to me whatsoever and destroys yet another workflow at the 99% mark. I understand that I can change the view rep manually, but manual workarounds and corrections defeat the point of using iLogic to manipulate our models.
Am I the only CAD user who wants the simple ability to "turn off" an assembly component? iAssemblies are not an option due to the shear number of combinations of unneeded components.
View 4 Replies
View Related
Oct 1, 2012
Is there any way to use the "Rotate at angle" command outside of the "custom view" environment?
Is there actually any technical reason why the controls in the attached screenshot are not available in the Studio and normal modelling environments?
View 7 Replies
View Related
Oct 30, 2013
I have been capturing data for measured building surveys with a Leica total station (TS06). When I upload the data into autocad i can see the node points (+) and text in the top view. When switch to look at the points from the front view (to produce an elevation), the text and points appear as a flat line, although the insertion point of the node/text is still correct. I need to find a way of rotating the text and points so they are visible in this view. I will then flatten the points and cut them to the top view to produce a 2d elevation.
we had a toolbar with a button to perform this function. However, now i don't have the toolbar,
View 2 Replies
View Related
Jun 23, 2013
i have been drawing a 3d model and when it comes to dimensioning, i can only do it for the vertical and horizontal distance from the top view. i cant find a way to dimension the thickness of my model from the side or ront view.
how do i change the settings for this..
View 3 Replies
View Related
Nov 4, 2013
I want to create a rule with CommandManager.pick who see the name of assembly and send a custom ipropertie to all parts of this assembly view in drawing, this is my none finish rule.
Dim doc = ThisApplication.ActiveDocument
Dim entity = ThisApplication.CommandManager.Pick(
SelectionFilterEnum.kDrawingViewFilter,
"SÉLECTIONNE UNE VUE")
modelName = IO.Path.GetFileName(ActiveSheet.View(entity.Name).ModelDocument.FullFileName)
PART = Left(modelName, 11)
EXT = Right(modelName, 3)
FIRST = Left(modelName, 3)
[code]....
I have the rule "SEND TO PARTS" in my assembly but i have this error message
MEMBER NOT FOUND. (Exception from HRESULT: 0x80020003 (DISP_E_MEMBERNOTFOUND))
View 8 Replies
View Related
Oct 12, 2013
When I open a file from PSE 11 Organizer in ACR 7.4, make my edits and hit done, the edits made in the Detail tab are not reflected when the file is viewed in PSE 11 Organizer. I had this problem a while back and found a thread that provided a cache or directory change that fixed the problem.
View 6 Replies
View Related
Apr 18, 2012
Is there a way that we can set the view label in the style library to show custom/user Properties?
We have set our iam/ipt templates to have some custom properties which we wish to display in the view label when the view is created however there this no way to add these properties to the label.
I find this a little strange as you can add these user Properties to the parts list in the style library? (I've added some screen caps to show what I am talking about)
View 8 Replies
View Related
Apr 25, 2011
Im currently trying to draw a layout for a simple angle iron part using the front, side, and angled view. Its a flat part made of sheetmetal and it will get 1 90* bend in it.
My first question is how do i bend a part in autocad LT 2011? Ive been using autocad for years but ive never had a request for an angled view.
My second question is how would i create a layout using all 3 views and include the info block in the bottom right displaying all the info?
View 9 Replies
View Related
Dec 6, 2013
I am looking for a way to make front view of a tire look like it's rotating ... i.e. the tread is moving. I have tried moving the tread, but that didn't look right.
I have seen it done but can't recreate it. I have attached an example .
View 2 Replies
View Related
Apr 24, 2013
My transparent materials are being pushed to the front of 3d view in Revit 2013, how can I fix it?
View 1 Replies
View Related
Sep 18, 2012
we have a part file that has 2 custom iproperties in it.
Length and Width.
If I delete these properties its fine and the properties are removed.
However if I then save the file, the properties become available again.
View 3 Replies
View Related
Nov 28, 2011
I am currently working on a drawing. I modeled up 6 cable QCDC's and have to position them in front of an imported Tiff file in model space so that it appears they are installed in the scene depicted in the image. I applied a gray plastic material to my models and when I go to render the scene, the Tiff file and my models are all faded drastically.
View 2 Replies
View Related
Jan 24, 2013
I added a new "Standard" and "Fastener Type" to the Clearance.xls file for my Inventor 2013. This was done in an effort to create a standard set of dowel hole sizes in our design department. So far it is working, however I have a few improvements I need implementing.
Changing the "Fit" name from "Close/Normal/Loose" to "Press/Nominal/Slip" to make it more user friendly in the hole wizard.DeterminE how to create a custom hole callout in .idw drawings for this new hole type. I would like to use the Hole Callout feature and have it automatically place our specific hole information/text for the machine shop to create the hole.
Ex..
Drill and ream for 1/4" Dowel hole
Press Fit
.2495 +0 -.0005
I have attached the clearance.xls file we modified to get this new fastener type to show up in our hole wizard.
View 4 Replies
View Related
Mar 3, 2012
Inventor creates a names to custom library parts based on settings and available parameters.
For all custom libraries I can create file names as I want except profile libraries.
The profile library create file name using Family Name + Stock Number and I did not find the
way to change it. I cannot get rid of that Stock Number in family name in this and other profile libraries. I wish I can use Part Number instead of Stock number in naming as more informative.
To change the file naming I do the following:
Manage - Editor - chose Library - chose family - Family Table - File Naming -
than chose required parameters to be shown as file name (for instance I have
{PARTNUMBER}), than in Map to Inventor Property: - Member.Display.Name
than OK - Refresh - Done.
All custom libraries obeys the file name changing EXCEPT the profile library.
[URL]
View 3 Replies
View Related
Mar 21, 2013
As I am creating drawings for parts/assemblies, I have to fill out the customers name and the job number which I currently do on every drawing I create by right clicking on the Drawing name in the tree, going to iProperties, and then filling out the fields I need.
I have to do this for every sheet. Sometimes over 100 sheets per job.
Is there a way, within the project file maybe, to have these fields be already filled in with the customers name and job number?
Every new project file I make is a new customer. So I'm wondering if there is someway to tweak the project file.
View 2 Replies
View Related
Apr 11, 2012
In the attached file there are two custom iProperties that cannot be perminantly updated nor deleted. The iProperties are "size" and "purch_qty". These iProperties were created and set using a custom macro but they are of course accessable via the standard iProperties dialog. I can change the values for these particular iProperties but as soon as I save the file they revert back to their original values. Same goes for trying to delete them. All other iProperties, custom and otherwise, seem to behave normally.
The sketch in this file originated with a 2D DXF file for a vendor supplied aluminum extrusion quite a few years back. The original file has been copied (save-as...) to about 20 different files over the years. The iProperties in question were added years after most of the files were created, Each file is exibiting the same problem. These files are used in a LOT of assemblies. The thought of recreating all these files from scratch and updating the assemblies is not very inviting.
No other IPT files seem to be having this issue.
Inventor 2012 SP-1
Acad 2012 SP-1
Vault 2012 Update 1 Hotfix DL18480860
Windows 7 Pro 64-bit SP-1
Quad core Xeon 2.26GHz 12 GB
Quadro 4000, 7936 Mb, driver 8.17.12.6570 (265.70), Dual Monitors
SpacePilot Pro, driver 3.3.107.0
View 3 Replies
View Related
Feb 17, 2012
I am facing an issue while opening a JT File in Inventor 2012. When I open the JT file I am unable to view the geometry.Since I cannot attach a JT file I am attaching a txt file converted from JT. The txt extension needs to be changed to .JT. What steps should I follow in order to view the JT file in Inventor?
View 3 Replies
View Related
Mar 9, 2011
Is it possible to view idw file on ipad? unless i print idw to pdf file?
View 9 Replies
View Related
Apr 1, 2012
Does view rep work in part file. I remember few months before some one wrote saying not in part file and it works only in assembly file. Is it still the case. How to turn off few parts in my drawing.
View 1 Replies
View Related
