For some reason I cannot get the ATTDEF Dialoge box to stop appearing and get the command line prompts. I have all the system variables set correctly -
FILEDIA = 0
ATTDIA = 0
CMDDIA = 0
The ATTDIA should surpress the diaolog box and give me prompts but it does not.
We have hundreds of macros for inserting blocks into drawings. Many require the user to input values for attributes. The command line in 2013 does not display the user prompt for entering values. ATTREQ is set to 1. ATTDIA is 0. We don't want to display the dialog box, just the prompt. Here is what a macro looks like...
*^C^C'clayer;LAYERNAME;-insert;BLOCKNAME;!userr1;;\'torient;l;;0;
There are two pauses before text orientation for a user to enter information.How do I get the attribute prompts to appear in the command line? Works fine in 2012!
I am working on a little lisp routine to draw splines, but can't get it working. The basic idea is that i first select a set of points that i can feed to my spline command.
(defun c:test2 () (setq pt (getpoint "
define point:")) (setq ptlist nil) (while (not (equal pt nil)) (setq ptlist (cons pt ptlist)) (setq pt (getpoint "
define point:")) ) )
Now i need to draw a spline based on these points. My plan whas to simply use the acad command itself. But this option didn't work.
(command "spline" ptlist "")
Then i tried using the vla-addspline command. But i can't even get this one working .
I'm working on setting up a process where I can bring AutoCAD drawings into GIS. I need to assign an attribute to a Polyline or Line so that the attributes can be viewed in GIS. I've noticed there is a way to convert AutoCAD to a SHP or SDP however I'm not familiar with this process.
View 1 Replies View RelatedI am using CGS12 along with my Epilog laser. The Epilog treats all line-widths up to 0.003" as vector (for cutting) and anything above this as raster (subject to DPI settings).
I have been using 'Hairline' as my vector but recently hit a problem and would like to guarantee that a line defined by a label such as 'Hairline' will always be below 0.003" in width (and therefore a cut-line on the Epilog).
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedI work with land surveying, and I'm a complete newbie to CAD. I use AutoCAD LT 2010, and I am having trouble getting some coordinates from a file.
I receiveda dwg file containing three adjoining lines and two ducts. Now I need to extract the coordinates (x,y) and some kind of point number/name so that I can use the data in a text file or in Excel.
I have tried the ATTEXT command, but it doesn't work. I don't even know if the template file I created is correct, because I suspect the main problem lies in the fact that the points along the line have no attributes.
how do I get the data I need? Do I have to assign attributes to the points before I can extract the coordinates? And what should the template file look like?
if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
how come the attributes of inviseble visibility states are visible after the explosion with the command BURST
View 5 Replies View RelatedI am experiencing this issue every now and then and I don't know why or how it happens. No modifications to the BlockDefinitions or any BlockReferences are made and for some magic all multiline attributes in the drawing file revert to single line. After that happens the only way I know to fix them is to go through all definitions in the Block Attribute Manager and make every attribute multiline again. This is very annoying because I don't know how it happens so it can be prevented and because it takes time to fix them again. AutoCAD 2012 (Mechanical) on Windows 7 32 and 64 bits.
View 3 Replies View RelatedHaving issues with multi line attributes in dynamic blocks. On the odd occasion I get the attribute moved for example i use multi line attribute for title block information and sometimes it moves where i don't want it .
View 0 Replies View RelatedI have all of my data in an Oracle database (Gas Enterprise Model). I need to join the pipe (Line) with the meter (point) in order to have the attributes of both for a report.
A query on geometry in Oracle definitely did not work and doing an overlay analysis in Map3D strips the attribute data when I create a buffer. There is nothing to join on for the tables, A Network analysis will not work because the lines are for services and don't have their connected distribution.
If it is possible to assign multiple attributes to a single line text within a block, and be prompted for them upon insertion.
View 3 Replies View RelatedWhat do I need: In the example I will mark attributes with underlined text, and simple text with bold text
(Position)numberDiamdiam
Diam= diameter symbol
In the model space, I enter values:
Position = 3
number = 15
diam = 12
I need to get:
(3)15Diam12
instead of
(3 )15 Diam12
Is it possible to make an Attribute, take as a "Position X" value, the "Text alignment X" from a text ?
I have a block which includes some Multiple lines attributes.
Now I don't want them to be multiple lines any more.
How can I change them to single line attribute?
In the block editor, the "Multiple lines" in the properties palette is gray out. I have create single line attribute and replace the multiple line attributes one by one.
Why don't make the Multiple lines property editable? This problem is since Multiple line attribute first time introduced.
Interesting thing is single line attributes can easily changed to multiple line attributes through the properties palette!
I want to entmake a block with a multiline attribute. Entmaking the block definition works fine, but what do I code for the Multiline Attribute? Should it be coded (0 . "MTEXT") instead of (0 . "ATTRIB")? I know (101 . "Embedded Object") does not work. What other codes need to be included?
View 2 Replies View RelatedI have a section marker with some text with it and when i make it a dynamic block and try to say flip it it will only take the circle and line with it and leave the text with attributes.
View 9 Replies View RelatedI've been searching for a command that could actually cut lines for purpose. For example, if I'm drawing a 2 line crossed, wish I could cut the 2 lines so they are now 4 segments. On a circle, I could actually draw a line that pass trough the circle on cut it off the way I wish. Does such command exists for autoCAD? Very often, I've many lines at the same time that I wish I could cut with a single one. The problem is that I don't wish to trim 'em and extend (losing time and long process). Sure there is also the div cmd, but this isn't what I'm seeking for.
View 7 Replies View RelatedI had a problem this morning where for some reason I needed to do a drawing recovery on a map - which is fine, all seems well.
The problem is that now when I type a command, it doesn't appear next to the cursor anymore. It's not really a NEED having it there, but I've gotten to like that in the newer CAD versions, and now I can't find the setting that makes it come back. Sure I CAN type everything and have it show just at the bottom of the screen, but I'd rather have my dynamic field back.
How I can restore it?
This is the problem I have. When I type something, ie a line length or a command, ie purge, whatever it is I type it is not shown in the command line... what am I doing wrong or what setting do I need to change..
View 3 Replies View RelatedCommand line for Dimension Fit
View 1 Replies View Relatedmy command box has mysteriously vanished (more than likely my own doing) and I would really like it back!
View 3 Replies View RelatedFrom my .NET dll I need to get the command line parameters that were used when AutoCAD was launched.
In the unmanaged world I used acedGetAcadWinApp.
Is there a .NET equivalent?
I am writing a API in .NET. I can send commands to the AutoCAd command line using the sendCommand feature but can i access the result returned too? I am not able to find the right class/function the redirect the command result back to my API
View 3 Replies View RelatedI have a problem and as this has happened the first time I fire up autoCAD I can see that I am not going to have as easy a time as I did with 3D studio Max.
I found a tutorial on line, and it was talking about the command line, so i was entering points like it said, fine. I had to put it down as something came up at work. Go back to it to play some more, now I can no longer specify points in the command line, pressing space or enter just clears everything and asks to specify a point again.
What have I don't to make this happen, or is it a bug in the program. I have tried restarting again but still no.
I can't see that I changed any setting (never do) or did anything to make it so the instruction line under the Command: window at the bottom of the screen now expects me to enter text, i.e. In the Command Window we have "open", after I clicked on File / Open, but instead of being taken to the usual drop down of my hard drive the bottom line on my monitor reads, "Enter name of drawing to open <.>: The same thing happens if I try to save a drawing. This is making it extremely difficult to open and save, i.e. to work....
View 1 Replies View RelatedI recently started using v2012 after some time using 2006 2008. I frequently would use the ED command to add text to a dim line but it appears 2012 uses a different command for this.
View 6 Replies View Related