I'm working on setting up a process where I can bring AutoCAD drawings into GIS. I need to assign an attribute to a Polyline or Line so that the attributes can be viewed in GIS. I've noticed there is a way to convert AutoCAD to a SHP or SDP however I'm not familiar with this process.
View 1 RepliesFrom the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
For some reason I cannot get the ATTDEF Dialoge box to stop appearing and get the command line prompts. I have all the system variables set correctly -
FILEDIA = 0
ATTDIA = 0
CMDDIA = 0
The ATTDIA should surpress the diaolog box and give me prompts but it does not.
I am experiencing this issue every now and then and I don't know why or how it happens. No modifications to the BlockDefinitions or any BlockReferences are made and for some magic all multiline attributes in the drawing file revert to single line. After that happens the only way I know to fix them is to go through all definitions in the Block Attribute Manager and make every attribute multiline again. This is very annoying because I don't know how it happens so it can be prevented and because it takes time to fix them again. AutoCAD 2012 (Mechanical) on Windows 7 32 and 64 bits.
View 3 Replies View RelatedHaving issues with multi line attributes in dynamic blocks. On the odd occasion I get the attribute moved for example i use multi line attribute for title block information and sometimes it moves where i don't want it .
View 0 Replies View RelatedI have all of my data in an Oracle database (Gas Enterprise Model). I need to join the pipe (Line) with the meter (point) in order to have the attributes of both for a report.
A query on geometry in Oracle definitely did not work and doing an overlay analysis in Map3D strips the attribute data when I create a buffer. There is nothing to join on for the tables, A Network analysis will not work because the lines are for services and don't have their connected distribution.
We have hundreds of macros for inserting blocks into drawings. Many require the user to input values for attributes. The command line in 2013 does not display the user prompt for entering values. ATTREQ is set to 1. ATTDIA is 0. We don't want to display the dialog box, just the prompt. Here is what a macro looks like...
*^C^C'clayer;LAYERNAME;-insert;BLOCKNAME;!userr1;;\'torient;l;;0;
There are two pauses before text orientation for a user to enter information.How do I get the attribute prompts to appear in the command line? Works fine in 2012!
If it is possible to assign multiple attributes to a single line text within a block, and be prompted for them upon insertion.
View 3 Replies View RelatedWhat do I need: In the example I will mark attributes with underlined text, and simple text with bold text
(Position)numberDiamdiam
Diam= diameter symbol
In the model space, I enter values:
Position = 3
number = 15
diam = 12
I need to get:
(3)15Diam12
instead of
(3 )15 Diam12
Is it possible to make an Attribute, take as a "Position X" value, the "Text alignment X" from a text ?
I have a block which includes some Multiple lines attributes.
Now I don't want them to be multiple lines any more.
How can I change them to single line attribute?
In the block editor, the "Multiple lines" in the properties palette is gray out. I have create single line attribute and replace the multiple line attributes one by one.
Why don't make the Multiple lines property editable? This problem is since Multiple line attribute first time introduced.
Interesting thing is single line attributes can easily changed to multiple line attributes through the properties palette!
I want to entmake a block with a multiline attribute. Entmaking the block definition works fine, but what do I code for the Multiline Attribute? Should it be coded (0 . "MTEXT") instead of (0 . "ATTRIB")? I know (101 . "Embedded Object") does not work. What other codes need to be included?
View 2 Replies View RelatedI have a section marker with some text with it and when i make it a dynamic block and try to say flip it it will only take the circle and line with it and leave the text with attributes.
View 9 Replies View RelatedUntil recently, CorelDraw X3 was working just fine. Now however, whenever I change an object's line or fill attributes, CorelDraw automatically sets those as the new defaults, overriding the defaults I had previously set. Clicking on a a color in the palette with nothing selected no longer invokes the defaults dialogue box.
I've looked through the various options dialogues in case I had inadvertently checked a box I shouldn't have, but I can't find anything. I've been using Draw since version 2, so I'm pretty familiar with it. I've never encountered this behavior before. I've had X3 installed for about 3 years or so.
I'm running CorelGraphics X3 SP2 in Vista, 2GB RAM, Nvidia graphics.
How do I sync attributes without using sendcommand or SendStringToExecute. Reason being I am looping the blocks and creating attributes. sendcommand or SendStringToExecute occurs only after the .net command is finished. what I want is that it should sync attributes in the program itself.
View 1 Replies View RelatedI've been fighting with the attribute exporter for several hours and can't get anything to generate except for a blank txt file. Below is an example of my template
BL:NAME C008000
DESCRIPTION C016000
I would eventually like to export several more attributes that my blocks have but I figure I should simplify it as much as possible for now. I do have a blank like at the end of the text script.
I've also attached my block that has the attributes I'm attempting to extract.
I have a block that is being inserted to my drawing via my .net program. The problem I am having is my attributes are centered, but the content coming from .net is not. If I change the attribute value in AutoCAD after the fact it goes back to being centered.
View 5 Replies View RelatedI'm looking for a map tool that can convert feature data from an SDF file or SHP to autocad block's with attributes data. My client just want blocks with attributes and dont work with sdf or similares, they extract the attributes and then work them in other software, so, i wonder if there is a autocad map tool that make the conversion from feature data SDF to blocks with attributes, that will make the work mutch more easier and fast.
Other question relational with blocks. How can we link block attributes and excell in real time, where i could change cells data in excell and the update happens in the open drawing and vice-versa?
And would like to know if there is a way to make this happen without vba tools or lisp's...just with map tools.
C3D2011
MAP3D2011
I'm a new at CAD Tutor but have been using autocad since R12 for DOS, I'm currently using AutoCAD 2011 MEP.
I received a file from an architect and the attributes don't burst and when I xref the file in to my drawing they don't show up. When I list the text, it says it is an 'Attribute Definition' but when I try and run attedit, the message says 'No object found'.
I believe the attribute problem is because the original file from the architect was made using Microstation and saved poorly to AutoCAD, but I'm not sure.
Function ReadDWG(ByVal DWGName As String)
Dim AcadApp As AcadApplication
Dim AcadDoc As AcadDocument
Dim Extracted_title As String RichTextBox1.AppendText(Path.GetFileName(DWGName)) RibbonLabel1.Text = "Opening AutoCAD"
[Code]...
I am using the above code to read block attributes depending on the name. But now I need to read the active drawing (drawing will be open and should read from the active document). In the above code I have referenced interop.dll. without that can I retrieve the block attributes. How to read the block attributes from the active document.
I have a question about creating title blocks with attributes. I know how to create attributes and I know how to draw title blocks but when you create a title block with attributes does it have to be saved as a dwg when you do the wblock command? And what about the viewport? Do I have to create the viewport every time I insert the title block? Normally I just use the template I created and fill in the date, page number so on. I would like to automate this with attributes to reduce chances of mistakes.
View 2 Replies View Relatedone of engineering company sent dwgs... in those dwgs have some attributes i make x-ref of that one dwg and than attach but after attaching attributes is not showing in attaching dwg....i have apply attdisp command and also attmode command..
View 2 Replies View RelatedI'm using AutoCAD LT 2010 and I'm trying to create attributes for a title block (sheet title, project #, etc.) and I can't get the attribute to show up. I do not have "invisible" checked, and I can't think of what else the problem might be. When I create a block with the attribute inside a box, the box shows up but the text does not.
View 9 Replies View RelatedOn an HND assignment there is a drawing of a Villa in plan view with outer walls, inner walls and then some attributed blocks created for furniture. Once drawn the second task is as follows.
Task 2
Write a report describing the methods you used, with a layout plan inserted into the document and to include a bill of materials extracted from the attribute files.
How you would go about extracting the BOM from the attributes?
I have saved a psd file as jpg using File -> Save as.
Also tried: File -> Save for web.
When I look at the newly saved jpg file in photoshop the colors are great.
When I look at the same jpg file in Firefox or Internet explorer the file look bleached (a lot lighter in color).
How do I save the image for view on web, and then make sure the colors match more closely to the original file?
To manually correct for the missing colors would be a lot of work, and I hope there is an automated way of doing this?
Using Photoshop 5.5.
Both images viewed on same computer in same light.
some attributes you can double click and edit within the dialogue box, others you have to double click and they are greyed out in the box, you have to click the little button with ... on and edit in place on screen... why?
whats the difference between the block atributes? attached is an example...
Using ACAD2014LT. I want to use the first variable attribute value as a variable in subsequent attributes in the same block. This will be extracted and used for tag references in a PLC program.
Along the line, i know I can change the enclosed character ( ' ), but can I remove it?
How Can I Get All Block Attributes and change it
View 9 Replies View RelatedI have this one file .txt with this features:
Point North East Z Description
1 8618063,68 312415,09 75,87 T1
2 8618138,38 312428,89 70,57 B_RIO SECO
3 8618132,23 312427,75 71,90 ARENAL
4 8618126,23 312426,64 72,50 ARENAL
5 8618112,22 312424,06 73,77 ARENAL
6 8618099,78 312421,76 75,35 ARENAL
7 8618089,51 312419,86 75,84 ARENAL
8 8618132,23 312427,75 71,94 J
9 8618112,23 312424,06 73,88 J
10 8618099,82 312421,78 75,36 ARENAL
11 8618089,48 312419,87 75,85 E_1
And I generated this code for read this file and insert one block with attributes for each line of text…..
If txtPath.Text() = "" Then
MsgBox("Select DB .txt.", MsgBoxStyle.Exclamation)
End If
On Error GoTo ControlErroresBD
Dim AcadDocPt As Document =
[Code] ....
‘To the end of this line I can insert the block,,,,,,, but I don’t know how to write the attributes…… I tried with the next code but it doesn’t work…. My bloque has 3 attributes and every tag named with “PN”, “CD” and “CT”
Dim AcadObj As Entity
For Each acObjId As ObjectId In AcadBlockRef.AttributeCollection
AcadObj = AcadTransPt.GetObject(acObjId, OpenMode.ForWrite)
Dim acAttDef As AttributeDefinition = TryCast(AcadObj, AttributeDefinition)
[Code] .....
How to join atributes from xls/xlsx to table in shp file?
I attache some sample files.
I have shp with 3 poligones. Each has two atributes in the table. I prepared some table in excel. Now I want to join this file to shp's table.
Should I connect this file though FDO? (ODBC)
We process survey data using Attributes to add extra intelligence and reduce errors.
For example, when shooting trees, the RAW file will contain something like this:
SS,OP 50,FP1299,AR308.2057,ZE91.0918,SD128.282,--TREE
FC,PN1299,FNTREE
AT,TNSZ,TV11.0
AT,TNTY,TVMAPLE
or when shooting a street sign:
SS,OP 50,FP1437,AR324.1135,ZE91.4728,SD123.235,--SIGN
FC,PN1437,FNSIGN
AT,TNTY,TVNO PARKING
The FC code sets up that attribute information will follow for the point number indicated by PN and the FN is basically explaining the name of the feature type. On the collector, this is all menu driven, making for few data entry errors.
The AT codes list the attributes name TN and then the TV reports its value.
Is there a way to preserve these attributes and their data when processing them into an FBK? Ideally, they would need to become part of a point description.
When processing this for that "other" CADD package, I am able to use these values in building labels for my survey points.