How do I sync attributes without using sendcommand or SendStringToExecute. Reason being I am looping the blocks and creating attributes. sendcommand or SendStringToExecute occurs only after the .net command is finished. what I want is that it should sync attributes in the program itself.
View 1 RepliesHave an ATT "A" that is set. I can change it and it will change. But I also have an ATT "B" which works the same way as the "A".
I've added a MTXT into the block so that both ATT's A and B will work together, meaning they will always be in a dead center - something like text (no matter what the string is, you can Align it Middle Center), using a FIELDS option, and parameter set to VALUE.
It works when placed into the drawing, but need something that once I place the block and want to edit the VALUE, the Fields will update/sync.
I am using Lightroom 4.4 on a 2013 Macbook Air OS 10.8.4.
I cannot see the Switch enables auto sync on the Metadata sync button. Its currently visible on another machine a MacPro with Lightroom v4.3. I find this useful to be bale quickly enable and disable the syncing of metadata. Has this been dropped in v4.4 or have I missed a prefs setting somewhere?
I am trying to adjust two D800 files simultaniously. Thus I select both images, toggle the Sync button to the Auto Sync state.
But, the adjustments done to the most selected image do not copy over to the other image, while this is the expected behaviour.
LR4.1 / Mac OS X Snow Leopard 1.6.8 / Macbook Pro i7 2,2 GHz
I'm working on setting up a process where I can bring AutoCAD drawings into GIS. I need to assign an attribute to a Polyline or Line so that the attributes can be viewed in GIS. I've noticed there is a way to convert AutoCAD to a SHP or SDP however I'm not familiar with this process.
View 1 Replies View RelatedFrom the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
i would like to be able to make a change in iProperties ( part #, description, stock number), and then automate/sync that change to the .idw of that part/project after the .idw is created.
is this possible? do i just need to fill out the iProperties BEFORE i make the .idw,
I really hope this is possible, we are going back and reorganizing all of our previous work and putting everything in vault now.
What's the best way to ensure that all the drawings for my project are updated if I make changes to the Style settings on one of them? I've been putting every sheet into a single drawing file, but now I'm up to about 50 sheets and it takes about 40 seconds for each save, even if I only made a single minor change since the last save. I don't have any iLogic that could be causing this.
So I'd like to split the sheets up into multiple.dwgs, but I want changes I make my Styles to be reflected in all drawings. Can I create an "external" stye file that all drawings pull their style from? Or will I have to export/import to each drawing every time I make a change?
I use a desktop at work and typically my (work) laptop at home. Problem I have been getting is when I have content like bearings or similar and I sync my Laptop to my desktop Inventor loses these kind of things.
I am using a seperate program to syncronize my two computers that is very effective but I am thinking I dont have it point to where inventor keeps this content and as such it loses it in transfer. Bad thing is that I lose constraints when things like my bearings dissapear and its a real pain.
How I can correct this so I wont be losing such things in a sync?
Inventor 2014 PDS
Why is it that some dimensions in a viewport are out of sync with the rest of the dimensions? Eg. a correct dimension is 240, but the next time you dimension the same distance, you get 24 as a dimension figure?
Also, in a long run of continued dimensions one or two of the dimensions is out of scale? I have tried making all dimension Annotative, same dimstyle, etc.
I think sometimes Autocad forgets that it is in a viewport, so some dimensions are correct to the viewport scale while others are to the limits of the paper size?
Not sure if this is by design, but when I set up LT2013 and sync to cloud at LOCATION A, the settings at LOCATION B get updated fine. But it doesn't bring accross the changes to the CUI / Ribbons / Workspace from LOCATION A.
I have checked and have all options to sync enabled, bar printers. I would expect the appearance and workspace should sync.
im using acad 2010 in work and in home. i want full sync of all the customization i'vei made in both sides. itried to use a cloud service like Dropbox, i copy and paste there all the supportfiles and i set the path to there inboth machines but for some reason acad wouldn't use it.
View 9 Replies View RelatedI've been using ACAD LT 2013 successfully, until the message started flashing on my screen "Sync Error, A customization sync error has occurred" It does not allow me to turn it off.
View 3 Replies View RelatedI have my settings in my PC, like PGP shortcuts, user preferences, etc. When I logged in another machine, which is a clean install btw, I expect that my other machine's settings will come here. But it is the opposite. My original machine gets default shortcuts, etc.
View 4 Replies View RelatedDoes cloud have any backups of sync setings? Maybe like settings from back a few weeks or more.
View 4 Replies View RelatedI have a simple block with a single attribute that I am trying to sync. Someone previously created this block, defined it on a named layer with the attribute defined on the same layer with a user font, then inserted it on three different layers. Now, even though I have redefined the block on layer 0, set everything to BYBLOCK, all the attributes are still on those other layers. And when I try to use ATTSYNC, all the values disappear. I don't get it. Isn't ATTSYNC supposed to retain all the values?
How can I get all of these blocks with their attributes and values intact on the same layer?
I'm trying to unskillfully crash my way through writing a VBA program for modifying Inventor drawing border info, and have managed through cannibalizing other programs to achieve 95% of what I wanted (ie the iproperties part).
Prompted Entries via VBA..I'd like to create a sync 'Prompted Entries' from sheet 1, across all sheets button.
The 4 prompted entry fields are always..I'd love some VBA code that could read the above 4 Prompted Entry values from Sheet:1 and then sync these values across multiple drawing sheets within one .idw file if more than one sheet was present.
I am wondering if there is a way that you can use the geometry from Architecture in Inventor other than just a visual concept. I am trying to create buildings in Architecture then import them into Inventor. I have tried the "Sync Inventor" command but there is no usable geometry when it is imported into Inventor. I have used Navisworks to show the building layouts but I am needing to be able to take measurements and possibly constrain to walls or other solid objects.
View 3 Replies View RelatedI'm not up to speed in configuring title blocks with sheet set manager and I've come into this situation unexpectedly.
I had to come up with a set of P&P sheets in a hurry to assist a contractor in providing a rough estimate for a sewer run, so I generated the sheets using the preconfigured imperial sheet set template. Afterwards I've switched out the border and title block generated by the template with our standard blocks. Our block attributes are old school and do not use fields. Now I am trying to upgrade those old attributes by replacing them with fields that reference the Sheet Set attributes.
Here is the problem: when inserting the field for the sheet number I can either use the CurrentSheetNumber or the SheetSetPlaceholder attribute. If I use CurrentSheetNumber, the title block shows the correct sheet number for the current sheet (the sheet I am making the edits from). However all the other sheets show that same number. In other words the fields do not show the corresponding sheet numbers from SSM. If I use SheetSetPlaceholder none of the title blocks will update to show the sheet number.
I believe I should be using the placeholder field but I can't get it to synchronize it with the SSM. Is there a way to make this work?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL]
I've just used the Sync Center in Windows for the first time. Basically I syncronised an Inventor project that resides on a server with my laptop so I could go into the field. All seemed to work well until I returned back to the office and performed the sync again. For some reason now all of my projects don't appear in the projects list.
Sync Center and Inventor. Should I be looking at Vault. Can it do syncronising better than the Sync Center shipped with Windows?
Product Design Suite
Inventor Premium 2012 - SP1 Installed
HP 8760w I7-740M Laptop
Windows 7 Professional 64
12 Gb DDR SDRAM
AMD FirePro M5950 Graphics Card
My pix are RAW. When I open them they go into camera raw. Open again and they go into regular ps/cs6. Do I have to get them into Bridge in order to sync them ? Don't know how to do this. How do I SYNC several pix that I want to color correct at the same time?
View 2 Replies View RelatedMy photoshop doesn not appear to be logged in for sync. In windows, I go Edit>Sync settings and the last sync option is greyed out and says. "Last sync: - "
Also when I go to the sync preferences>sync settings, the only thing showing up in Adobe ID box is "Sign in as:" and the next line says "Last sync:-" Everything else is empty in that box. Not sure if its related but when I use share on behance, it just stays on loading. I did check to make sure my adobe ID was linked with my behance account. I assume the issues are related to my Adobe ID not showing
The only place I can see my adobe ID working is in the help menu where I see "sign out: (my ID)What can I do to get Sync and "Share on Behance" working?
Is it not possible to sync workspaces in PS CC? I see that its available in IS but not in PS.
View 2 Replies View RelatedI am attempting to transfer old VHF video to DVD. Using Hauppauge win Tv capture I achieve a surprisingly good quality sound and vision when capturing and all appears well. But! when I play back the VSP, after approx 2 seconds the sound starts going out of sync and progressively gets further and further out of sync, at worst approx 1 min separation. I hoped that after rendering this would correct itself, but no. I am using UVS 1.
View 9 Replies View RelatedI have a music project with H.264 Video files. The files are all from the same camera and are the same.After burning a BluRay folder on a NTFS external hard disc the first song (is the first from the original video files) is going out of sync. The rest of the Blu Ray is in sync.Watching the first file separtely (KMPlayer and panasonic blyray player) everything is ok.Watching the project in Video Studio before burning everything is ok.
To prevent the out of sync I have made a "smart-proxy file" of the first file, before burning. But sadly no differences. (any need to make a smart-proxy file of all files??)
But not exactly, and after taken some actions I still got out of sync. It has something to do with the BluRay burning but I can not find the cause of it.
Background info:
Editing Program
VIdeo Studio Pro X5
characteristics original video files
Video type: H.264 Video
characteristics: 24 bits, 1280x720 16:9
framespeed: 25000 frame/sec
variable bitspeed (max16568 kbps)
Audio type: Dolby DIgital Audio
48000HZ
Low: no
Bitspeed: 192 kbps
Project characteristics
PAL (25 fps)
MPEG bestanden
24 bits, 720 x 576, 25 fps
Bovenste veld eerst
(DVD-PAL), 16:9
Gegevenssnelheid video: Variabel (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
the thing is whenever I move something in top, left or other views than Camera/ Perspective view, I don't see the object moving in the perspective, until I click on it.
View 2 Replies View RelatedJust added AI CC to my home machine, changed my prefs, etc. and then synced them to the cloud.Then I installed AI CC on my work machine, and the Sync button isn't even an option. It's grayed out.Is one supposed to be "signed in" somehow when using CC?
View 3 Replies View RelatedWhen I use the sync settings in illustrator it won't sync my custom symbols. It syncs everything else.
View 2 Replies View RelatedThere appears to be an issue with colorsync between PS CS6 and AI CS6. This is what I have come across: Both applications are color synced to sRGB color space, converting from and to other colorspaces using Adobe Ace, absolutly colometric. An sRGB document is created in PS CS6, featuring a square of the color #000050. After that an empty RGB doc is created in AI CS6, also with an sRGB profile and this PS file is placed within. The color of aforementioned square, checking with the AI color picker is now #0f004f and not #000050. Creating within this very AI document a rectangle of the color #000050 and then exporting this file to PS, you'll end up with a PS file, featuring 2 squares of the same color #000050.
View 3 Replies View RelatedWhen I right-click my folder in Library, there is no sync option.
View 1 Replies View Related i've been able to import photos directly from my iphone by plugging my phone into the USB/iPhone cable (and then into my mac) and then doing "Import Photos from Device" and my iPhone would appear with the standard grid of photos. Ive imported a thousand photos or so from my phone that way.
when i plugged my phone in and tried to import my photos, in LR 4.1 (not 4.2), many of the new photos said "no preview available". I thought that was odd, so i thought i'd disconnect and then reconnect the phone.
At that point, the import screen says "no photos found".The photos are still available on the phone itself, but not in LR. I rebooted and upgraded to LR4.2, but still i'm getting the same thing.