I've been trying to draw without the command line visible and am liking it. Have been using F2 if I need it while in a command but am finding the text window a bit obtrusive. It also gets hidden when you click in the drawing area.
Is there a way to activate the command line transparently? If you are in a command, Ctrl+9 cancels it.
How do you convert a 3d hidden line view in Revit into 2d hiddenline flatten view? Or I have to bring it to AutoCAD to flatten it?
View 1 Replies View Relatedhow to make the lines of a reference part that are in effect acting as hidden lines become removed from a view?
We've tried making the part phantom...which isn't right as we need the line representation of the part to be as the reference linestyle...
We've tried changing variables & tick boxes in the edit view dialogue boxes...but nothing works...
I made this custom hidden line, here is the defiinition:
*SCADA_FO_HL, - - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- -
A,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,["SCADA-FO",STANDARD,S=.375,U=0.0,X=1.0,Y=-.1],-5
It leaves a continuous line at the beginning and end of the line. Is there a way to get rid of that?
I must be missing something fundamental when trying to change a line from a solid line to a hidden or dashed line in Autocad 2000. I use the ltype command then load either Hidden, or dashed ISO,or both, and invariably the scale is way off in that I always end up with a still solid line, after using modify properties. After all that, every line I draw after that comes out dashed. Maybe I should fool with the layers? Is there a basic procedure I should follow here?
View 2 Replies View RelatedI need to change a solid line in a drawing to a dotted line to indicate that it is a hidden line. I know I should use Modify/Properties, I just don't know how to import the dotted line into the properties box.
View 5 Replies View RelatedI saw some years ago a 3D drawing where hidden lines were dashed after hide command. I tried to find out, how it was made, but nothing. Today I need this solution, but I can't find information, how is it possible.
View 2 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
I have drawn a black horizontal line 100mm long. Under that line a have a 100mm line coloured blue. How do I select the blue line? In AutoCAD 2000 I would hold down ctrl and select the line. Then scroll using the mouse pressing right click to select. I am currently using AutoCad2011. This function does not work.
View 4 Replies View Relatedwithout reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedI used these commands years ago and cant remember what they are. I am designing furniture in 3D and want to view the object at SE Isometric, then rotate an additional 18 degrees, then take a screenshot that will basically give me a block that is a line drawing of the object with lines hidden. This is a question with two parts:
#1: How do I rotate from SE Isometric 18 degrees to get the view angle I want?
#2: How do I take a screenshot of the object that will produce a block with hidden lines?
There are two seperate commands for each of these, I just can't remember what they are.
Attached is a picture of the final product I'm looking for.
After I created a 3D support I used Projected Views to make all view, but the problem there is no Hidden lines as you can see on the picture.
I use AutoCAD 2013
I am having a problem with the show hidden line command, because when used in the project I can see dashed lines and continuous lines. I was looking for how to manage the line pattern in this command but there is no way to do it.
See the attached image of my problem.
Some of objects that I draw have partly hidden lines. Basically I can create two lines and then set one to be solid and the other one to be hidden. But may I know any faster way to do that?
View 3 Replies View RelatedWe have been trying to plot some 3D objects in our drawing with a hidden line. We need the drawing to not show the hidden 3D lines but to show the edge lines of the object to plot as a hidden line.
View 2 Replies View RelatedIn the attached drawing you'll see I am trying to print a wireframe view of a 3D object with hidden lines displayed as dashed...in paperspace with an MVIEW viewport. To achieve this, I created a custom visual style called "3D Wireframe with hidden lines" because AutoCAD Mechanical doesn't come with a view preset that will do that for some reason. Even though the viewport looks perfect in paperspace, and is set to print "as displayed", the drawing prints (and previews) with the dashed line as solid instead.
I know I could use VIEWBASE to create a drawing view with hidden lines set to "visible and hidden", but that doesn't mean I don't want to know why AutoCAD is doing this strange behavior with standard viewports.
I need to draw a couple of hidden lines into a drawing. I see that it is not in my database when I go to Modify/Properties, it does not exist. I am using either v 2000, or v 2007 if it matters.
View 5 Replies View RelatedHow to find the hidden line type!!!!
View 6 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
I'm running Architecture 2013. When creating an elevation object from a 3D model, the hidden lines are not being removed. I've never seen this before, though I have been using Architecture and ADT for years. I've recently upgreaded from 2009 to 2013, and VOILA!
Hidden lines not removed from elevation and section objects. I've tried various tests, to no avail.....
In solidworks there's a "hidden line" option that displays a 3d part with all its sketch lines (instead of a regular solid) which allows the user to view all the different sides of the part easily. So I was wondering if there's such an option in autodesk inventor 2013. Currently, to view all the different sides and aspects of a part easily, i have been changing the part's material to polycarbone or some other plastic material; this makes the part a little translucent. But this is less effective than the hidden line vew availble in solidworks. method that makes different parts of a 3d part more easily to be viewed?
View 1 Replies View RelatedI'm trying to plot 3D objects with hidden lines. I've set the viewport SHADE PLOT property to "Legacy hidden" and set my visual style to 2D Wireframe with 2D Hide-Occluded Lines linetype set to "Dashed". The hidden lines do appear, but I don't like the size and spacing of the dashes. Is there a way to add "Hidden" linetype to the selected visual style? Or perhaps there's a way of adjusting the linetype scale for visual style occluded lines (similar to LTSCALE or PSLTSCALE command)?
View 2 Replies View RelatedMany is the time that I need to have hidden, or dashed lines added to a drawing. I do this by putting LTYPE in the command line then loading the dash or hidden line that I want. The problem is that long after I have done this, I get a dashed line on any line that I attempt to draw. Even if I dimension something, the arrows and lines are also dashed lines. I go back into Modify Properties and LTYPE and attempt to delete the line types that I have added and I am not allowed to delete them.
View 1 Replies View RelatedA large part of my job is creating installation drawings for plants (equipment and catwalks). Usually what I like to provide the installers is a plan view showing the equipment / catwalks with the base pads of the supports visible as hidden lines. If I just turn on hidden lines in a view, then it is too crowded.
However, manually turning on hidden lines for hundreds of base pads (potentially) is a huge time-sink and usually involves going through the browser manually to find them all. What I would like to do is automate the procedure to some extent. Usually there is only 4 or 5 different parts in an assembly that I need to have hidden lines for.
Can this be done? I want to go through the DrawingView Object to get at a subcomponent of an assembly and either set that component to have hidden lines (where needed) or no hidden lines.
View 8 Replies View RelatedI am facing small problem with inverter drafting. I am unable to show hidden line of pattern by direct selection of all object . I have to select one by one item from pattern.
In my drawing there is tie rod item ( find attached file) i have shown hidden line of only this part . and i have to select all items one by one.
In 2008, never had this issue.Just dumb, circles, and lines in a view port, that have hidden or center linetyoes assigned to them. When we go to plot using legacy hidden (this new for 2012?) the plot comes out with continuous lines. These are not solids. Just ordinary line entities.Now, when I change the shadeplot to "hidden" the linetype is shown correctly, but now my entities are coloured, when I just want my drawing to be black and white (going to PDF), even though all of the colours in the pen style are set to "Black".
Has this changed? Is there a new variable introduced?
I'm drawing objects (walls, platforms, etc.) in 3d made up primarily of extruded polygons. I want to be able to plot these objects in a way that hides all of the lines which are obscured by other objects. Currently I have my viewports set up with a 2D Wireframe visual style and a Hidden shade plot. This isn't working for me. I'm still getting all of the lines in the drawing visible no matter what.
Here's the strange thing: It seems to work perfectly fine in plan view, but not in front view. Also, it's worked fine in the past. It seems that the problem has gotten progressively worse over the past year or so.
I'm using AutoCAD 2008.
Is there a way to show the edge of the riser finish as a hidden line in plan?
Also the edge of nosing against the riser to be shown as a hidden line in plan?