In VB.net when I send a command to the command line, how can suppress the command line echo?
Is there better ways of sending commands to acad?
acaddoc.SendCommand(
"-STYLE" & vbCr & "SCHNormal" & vbCr & "romans.shx" & vbCr & SCHNormalH + 2 & vbCr & ".8" & vbCr & "0" & vbCr & "No" & vbCr & "No" & vbCr & "No" & vbCr)
We use Maya 2008 and 2009 here, along with Turtle 5.1. Our exporter plugin only works with 32-bit Maya, so we are a bit tied to that as well. We are using Turtle to perform shadow and AO bakes for our game, but Turtle fails unpredictably when baking large (>4096) textures. Many times I see:
// Error: Error during baking, see script editor for details! //
Of course, even with "Echo Every Command" enabled in the Script Viewer, and every output option enabled in Turtle, I get no actual error message. On a 16318x16314 bake, it completes 75% of the bake, then does nothing for the remaining 25% (while updating the progress bar) and exiting with the above message. On 8K bakes, it will seemingly finish the bake, but not write out the texture. Sometimes, Maya will crash completely, either with the usual error dialog, or just silently close without any message whatsoever.
In my experience, running out of memory on a 32-bit program can have similar results, and it is possible that 32-bit Maya even running on 64-bit Windows 7 has the same issues, but Task Manager shows only 1.5 GB used by the Maya process at the time of failure, far below the ~2 GB addressing limit for 32-bit programs.
I'm running the following string in a routing that is looping so I get dozens of these prompts. How to supress these? Or, do i have to use to entmake?
(begin loop...
(command ".-Mtext" CSW-Tpoint "W" 0.0 (vl-filename-base (vla-get-imagefile image)) "")
);end loop
Prints to the command line..
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
In dialog boxes the drop down menus appear blank until I drag the mouse over it then the contents appear as I drag the mouse across. Also the cursor doesn't echo back (flash). I have tried updating drivers to no avail.
Running Civil 3D 2011 with all updates.
Windows 7 64 bit
16 gig ram
Quadra fx 1800
Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz
I have attached a couple images to illustrate.
How do I reduce echo without resorting to measures like hanging blankets in the room to reduce echo? apply denoiser and other sound effects?
View 8 Replies View RelatedUsing X5 to create a video file from a project file in the timeline.
After the file completes rendering, the project preferences default is set to play the rendered file. But I find that when the playing commences after rendering, the sound has an echo effect that isn't part of the original files. Like the original sound is reflecting off walls, and you get the same sound just spaced apart by a small time period. I've tracked this to what appears to be X5 playing both the rendered file and the project file at the same time. If I turn the project preferences item "play after render" off, off course nothing happens after rendering completes. And separately playing the rendered file, the sound is normal.
Is there a way to stop this echo effect? Ideally, just play the rendered file only. But failing that, change the preferences default. However, there does not seem to be any way to change the project preferences default for this item.
I've been searching for a command that could actually cut lines for purpose. For example, if I'm drawing a 2 line crossed, wish I could cut the 2 lines so they are now 4 segments. On a circle, I could actually draw a line that pass trough the circle on cut it off the way I wish. Does such command exists for autoCAD? Very often, I've many lines at the same time that I wish I could cut with a single one. The problem is that I don't wish to trim 'em and extend (losing time and long process). Sure there is also the div cmd, but this isn't what I'm seeking for.
View 7 Replies View RelatedI had a problem this morning where for some reason I needed to do a drawing recovery on a map - which is fine, all seems well.
The problem is that now when I type a command, it doesn't appear next to the cursor anymore. It's not really a NEED having it there, but I've gotten to like that in the newer CAD versions, and now I can't find the setting that makes it come back. Sure I CAN type everything and have it show just at the bottom of the screen, but I'd rather have my dynamic field back.
How I can restore it?
This is the problem I have. When I type something, ie a line length or a command, ie purge, whatever it is I type it is not shown in the command line... what am I doing wrong or what setting do I need to change..
View 3 Replies View RelatedCommand line for Dimension Fit
View 1 Replies View Relatedmy command box has mysteriously vanished (more than likely my own doing) and I would really like it back!
View 3 Replies View RelatedFrom my .NET dll I need to get the command line parameters that were used when AutoCAD was launched.
In the unmanaged world I used acedGetAcadWinApp.
Is there a .NET equivalent?
I am writing a API in .NET. I can send commands to the AutoCAd command line using the sendCommand feature but can i access the result returned too? I am not able to find the right class/function the redirect the command result back to my API
View 3 Replies View RelatedI have a problem and as this has happened the first time I fire up autoCAD I can see that I am not going to have as easy a time as I did with 3D studio Max.
I found a tutorial on line, and it was talking about the command line, so i was entering points like it said, fine. I had to put it down as something came up at work. Go back to it to play some more, now I can no longer specify points in the command line, pressing space or enter just clears everything and asks to specify a point again.
What have I don't to make this happen, or is it a bug in the program. I have tried restarting again but still no.
I can't see that I changed any setting (never do) or did anything to make it so the instruction line under the Command: window at the bottom of the screen now expects me to enter text, i.e. In the Command Window we have "open", after I clicked on File / Open, but instead of being taken to the usual drop down of my hard drive the bottom line on my monitor reads, "Enter name of drawing to open <.>: The same thing happens if I try to save a drawing. This is making it extremely difficult to open and save, i.e. to work....
View 1 Replies View RelatedI recently started using v2012 after some time using 2006 2008. I frequently would use the ED command to add text to a dim line but it appears 2012 uses a different command for this.
View 6 Replies View RelatedI would like to calabrate a tablet when i type cal i get this
View 9 Replies View RelatedI've been trying to draw without the command line visible and am liking it. Have been using F2 if I need it while in a command but am finding the text window a bit obtrusive. It also gets hidden when you click in the drawing area.
Is there a way to activate the command line transparently? If you are in a command, Ctrl+9 cancels it.
I was going through some exercises in an ACAD book and floating my command line, etc. and now I can't get it back to it's original place. Or at least when I do it's covers everything there.How do I get it back to normal?
View 9 Replies View RelatedIn Adobe Premiere, I am getting an echo when I change an audio clip's speed/duration. The change is from 100% to 103%. I've tried other values in the speed duration but all create an echo.
View 1 Replies View RelatedFor some reason I cannot get the ATTDEF Dialoge box to stop appearing and get the command line prompts. I have all the system variables set correctly -
FILEDIA = 0
ATTDIA = 0
CMDDIA = 0
The ATTDIA should surpress the diaolog box and give me prompts but it does not.
I know how to add to the layer keys, and it seems to me that you can add a layerkey via the command line. Is this accurate or just wishfull thinking?
View 1 Replies View RelatedHow do you pause the program to run a command line. Ex. MyDrawing.SendStringToExecute("command", True, False, False). I want to regen the drawing after the command. I am using Autocad 2011.
View 3 Replies View RelatedHow does one programmatically set the command line to have keyboard focus?
I'm programmatically setting an active/focused PaletteSet's visibility to false.
_paletteSet.Visible = false;
I would like to follow this line with code that sets the command line to receive focus.
The PaletteSet for other reasons has KeepFocus = true.
I've tried various Win32 APIs (SwitchToThisWindow, SetForegroundWindow, SetActiveWindow) to no avail. I also tried SendCommand() and SendStringToExecute(activate=true,..) , etc.
I imagine there's a way to do this with the native APIs.
I used to have my ribbon and commandline next to each other but now whenever I try and put them back next to each other it always ends up with one on top or one on the bottom. I added a picture to try and explain this!
View 1 Replies View RelatedI turned off the command line because I don't use it or need it on my screen. But each time after I do a plot preview the stupid thing automatically turns itself back on.
Is there a way to permanently turn this thing off because apparently hitting the "x" on the toolbar isn't working correctly.
Also, why did they do away with the flyout option on the commandline. At least then I could dock it somewhere and collapse it.