Today Illustrator CS4 decided to start crashing on me when I try to paste text into the art board. It will also not allow me to type text into the artboard. Whenever I try to type, it just does all the tool shortcuts. I have alread tried deleting the preferences and that hasn't worked at all.
View 1 RepliesThis has been an issue for me for a while, not just in CS6. When copying text from Photoshop into Illustrator the font comes through but the size is always about 4 times what it was in Photoshop. Both documents are set to the same dpi. I don't understand where it's getting this arbitrary size info from. Any trick to get the size to come though correctly?
View 11 Replies View RelatedIllustrator CC, Mac OS 10.8.4 : When pasting text formatted with a Paragraph Style, the style drops off and the text converts to Myriad. I am copying and pasting from/into the same file - even into the same text box.
View 7 Replies View Relatedtrying to copy txt from an outside text editor and pasting them into an open, editable text layer in my workspace. The problem is that I can COPY the text fine, but when I click over to PS to paste it into the open editable text layer it either pastes the previous text from my clipboard OR it won't paste anything at all. I can then go into any other text field on a browser, spreadsheet document, a different text editor, notepad, etc and successfully paste the proper batch of text I wanted to paste into PS. Sometimes I have some rather large files open 50+megs when I notice this happen. I have to save my work and close out entirely of PS and then open it again before I can begin editing my original document again and successfully paste the text into the open editable text layer. This may last for a few COPY/PASTE sessions of additional text in additional text layers, but then begins displaying the symptoms I described above.
I am on Win7 on an AlienWare M17XR3 laptop with 16G RAM and AMD Radeon HD 6900M Series display adapter.I assume it's either in my PS performance settings which I have PS using 10413MB RAM and has over 350G scratch disk space. If it's not that I guess my laptop system performance settings which I've never tinkered with since I purchased it.
I have recived an illustrator file which ontains some text and I have to update the labels on the file but it seems the text has been chnged to Outlines Path. how i can convert them to regular editable text type?
View 4 Replies View RelatedIm running Photoshop and Illustrator CS on a G5 with os X and ever since I've installed them I've been unable to copy and paste text from illustrator without converting to outlines.
I get an "operation cannot complete because of an unknown error" message
I'm running CS6 16.2.1. When I copy some colored text it is persistently pasting in black. I've restarted CS6. I'm on a brand new iMac and have opened CS6 for the first time so I know the prefs are brand spanking new. I'm not running any clipboard managers either.
View 2 Replies View RelatedI have 3 artboards open and am trying to move text from one artboard to another, each piece of text is on a different layer, but when I use the selection tool and just drag it across to the next artboard, nothing shows up. How do I move text from one artboard to another?
View 1 Replies View RelatedSince upgrading to Illustrator CC, I've noticed a strange issue (on Mavericks). When I copy and paste text (within the same Illustrator doc) Illustrator ignores the colour of the original text andwill always pastes the text as black.
How to get Illustrator to paste the original colour or turn this behavior off?
I am using Illustrator CS5. I just got a new MacAir and was required to install Java6 (not sure if that's exactly what it was called) in order to use Illustrator. Now when I select the TYPE TOOL, it turns really light gray and then disappears whenever I move it onto the artboard. It worked before..
View 2 Replies View RelatedIn InDesign I am able to assign a variable showing that page.
Example = Page numbers in a book.
Is there a way to do this in Illustrator?
Example = Panels for a structure. Labeling the panel with the artboard name.
For now I am doing this manually. I would LOVE to speed the process up.
DETAILS: The artboard names will exist on the artboard itself when printed (very tiny, in an area hidden by metal posts, for ease of assembly at a construction site). I also need the artboard name to show up outside the artboard in a slug area (much larger for easy viewing in the file).
I'd like to just Change the name of a duplicated artboard, and have those pieces of text change themselves, rather then me typing it in two places for every artboard... I can have almost 100 artboards in one file on the structures I work with.
Encountered a bug when copying and pasting text from one text box to another? It seems to paste more text than I originally selected. I am on Mac OS X 10.6.8 and my AI is 16.0.4.
View 1 Replies View RelatedWhat is the cause of text that I copy and paste not retaining the colors it had? I have many text blocks with large numbers and letters each having their own color and when I copy them in order to paste them elsewhere, the letters/numbers have different colors. For example all numbers that may have been pink are now black.
View 6 Replies View RelatedI am creating a logo, and I want all black parts to be visible, and all white parts to be invisible.I work in Illustrator CS5, and I have text with multiple strokes on top of another object...I want only the inner fill of the text to knockout to the artboard, while keeping the strokes intact.
I tried "knockout" tool, pathfinder merge, creating outline from text, and nothing has worked so far.I've browsed online forums for answers and nothing works.
I want all the black to be one file, and remove all the white. I tried the "select same" function, but this didn't work either.
I have an Illustrator document with ~100 artboards, each artboard named by me. Each artboard has one textbox in it. Is there a way to take whatever name I assign to the artboard and print it into the text box inside that artboard? So in the end I would be able to see the name associated with each artboard on the artboard itself. Ideally I could run the script once (i.e. "turn it on"), have it populate all the text boxes with the artboard names, and then have it dynamically update the textboxes when I change an artboard name regardless of whether the file has been closed and opened since I originally ran the script.
View 26 Replies View RelatedIs there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
The problem just came today while i tried to copy/paste text from Ms Word. As I usually do it asks me about formatting options before pasting text but today its not working the way it should. It simply pastes plain text without all formatting I did to my document in Ms Word. I even tried to repair my software but nothing worked.
View 1 Replies View RelatedIs there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
I have an issue with copying cells containing text from Microsoft Excel 2011 for Mac and pasting them into Illustrator CS5. I select the whole cell(s) from Excel, open a blank Ai document and, without anything selected so the format is preserved, I paste the cells.
The issue comes with the resulting copy of the cells in Ai. The type which was bold in Excel is bold in Ai... but not really. Ai pastes the bolded text as not bold, but then makes a copy of that same text, puts a stroke on it, then places that over the regular text, so it looks bold. But now I have two copies of the same word, one regular and one with a stroke on it right on top of one another.
This normally wouldn't be an issue but I have to edit this info in Ai later - and there's a second problem. When I paste the bold text from Excel in Ai, the resulting word is broken up into individual text blocks for each letter. Instead of preserving the whole word as one editable text block, I now have to click on each letter to change it.
There is a catch 22 to these problems: These cells that I am copying from include bolded and regular text, and the regular text pasted into Ai without any problems (even the text blocks are preserved). So it's the bold text that is causing the problems
I have a feeling this has to do with how the individual cells are formated in Excel, but I have to copy data from many different cells made by many different people, so I am at a loss of what to do.
I have include a screen shot of what's going on with cells after I paste them in Ai. I have moved the oulined "5" up so you can see the regular "5" below it.
I've been using CorelDraw X3 for a while now and whenever I have copied and pasted artistic text is has simply pasted over itself in the same place for me to move wherever I want to.
Yesterday I copied some artistic text and when I hit paste it pasted as paragraph text, in a different size and font and in the center of the page. Have I accidentally and unawares changed a setting?I know I can get around this by duplicating instead of pasting but it is frustrating as it is a feature I use constantly.
I have a type layer with some text in it (a headline, let's say). I click on the layer, I click on the Character Panel, and first thing I see is the color in the Panel is not the color of the font in the layer.
I then click on any Panel property, and the text in this layer is replaced by text from another layer in my document ( a paragraph layer, let's say), but the color is not the same as the layer the text came from.
I have to different colors, one for the background and a second for the foreground. I want to know if there is a way that I could type my text across the background and it be the same color as the foreground and once it gets to the foreground it switches to the background color to be readable???
View 7 Replies View RelatedI have tried making a text box in CS6 with a type size of 4mm. When I copy and paste into the text box, the type stays the same as what has been copied and I cannot change it. I have a text box that says it is 4mm text but it has condensed type and all different fonts within it. I cannot get it to unify the font and font size together.
View 8 Replies View RelatedEvery time I change the text type, the program shuts down and I need to reopen it. I'm using CS5 for OSX. I've reinstalled the program twice now, and it still does the same thing.
View 7 Replies View RelatedI'm trying to rotate text inside an text area type.That is, rotate the text (so its e.g. 30 degrees going across the screen), but the area it is within does not rotate.
Everything I try when rotating rotates the entire area + the text in side, which makes the positioning of the shape my text is in wrong.I am after being able to change the inside text angle and content whenever needed.
I had several CorelDraw documents that crashes on me, and the auto-backup did not work.
In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.
I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.
Strange the auto-backup directory/folder always do not have my backup files too.
First it stops pasting anything except the first thing copied when Gimp opens, and now this. When I try to search for a font or type in text in the text tool in Gimp 2.8, it just jumps to random other tools instead of typing.
Why can't this program ever seem to work FULLY?
When i using a Type tool always showing a dark background so i can't see any text
View 3 Replies View RelatedWhen I take the Type tool and draw a text box it simply draws a box with no fill or stroke and I can't type in it. When I simply click with the Type tool, a one-pixel dot appears and blinks like a input cursor, and when I type it blinks like it should be moving but it's not. I can't write any text whatsoever...
View 3 Replies View RelatedI've croppsed and resized an image
I try to put text over it and then move that text
I just can't move the text
Instead the image layer moves
For example from 1 to 100 or more like this 1 2 3 4 5 ..... 101 102 103 and so on.
I need this to end up in Illustrator but I also have the office programs Word, Excel, Access but I'm not advanced user there.