AutoCAD Map 3D :: Text And Arcs Not To Scale
Jul 9, 2013
Using AutoCAD Map 3D 2012 Im exporting a few subdivisions to MapInfo after doing my steps on a MAPEXPORT command to create a .TAB or .MIF / .MID which are the steps do below.
MAPEXPORT --> select format_ .TAB or .MIF ---> select my drawing manually ----> do my coordinate conversion -----> DONE..
When in MAPINFO and ready to open / import the exported .TAB it opens and places the drawings (subdivisions) in its correct coordinate I gave it, but the TEXT and ARC / CIRCLES do not come in to scale at all they are extremely large to a point where they can't be seen till I do a zoom all.
View 2 Replies
ADVERTISEMENT
Sep 6, 2012
I am looking for a way to use objects created from lines and arcs as text because of a machine that will not read text. The objects look like letters and numbers. I am wondering if there is a way to create a text style, library or whatever with the created "text". There can be hundreds of characters on a single drawing so importing and aligning and placing each object 1 at a time is very slow and painstaking.
View 9 Replies
View Related
Jun 12, 2013
Im working for a geological firm that use timescales to describe their work (depths at times etc). I need to compress the time bar but not alter the text but cant find way to do it. Im only scaling in 1 direction.
View 4 Replies
View Related
Oct 9, 2012
I am trying to set up my template for architectural drawings. I would like to use annotative text and dimensions and leaders. I have selected a font and am trying to set my Paper Space text height to 3/32" so all drawings in all scales have text of 3/32". When I type in 3/32" it returns a value of 1/8". How do I get it to recognize the 3/32" value. Also if I save this in the dwt file will it always be set for this?
View 7 Replies
View Related
May 22, 2011
When I create new drawing, for example, the drawing looks good in 1:400 scale and text I use 1mm height for bearing & distance and it looks good and readable(not too big or small). However, when I create the new drawing and scale it to 1:2500, I don't know what size should I set for my text so it will looks good and readable.So, my method is to set random size so it would look good in model and paper size the print it out.But, sometimes, the text will looks big or too small on actual paper. Then I need to repeat the process till it readable.
My question is, can autocad scale the text size automatically when I create new drawing at different scale .
View 4 Replies
View Related
Mar 18, 2013
I have this layout inside cloud area i want to standard setting like if i want to print on A3 paper which text height i need to use dimension title block etc.
2nd question is that inside cloud area there is some point (Red) like M1 to Mxxx i need to get coordinate in table is there any lisp to make table with coordinate otherwise i need to pick one by one point p
View 0 Replies
View Related
Apr 25, 2013
we used AutoCad LT 98 & hasn't changed when opening the same files in LT 2014. All curved lines (arcs) that occur in a recently-opened file look like two straight lines with an angle at the mid-point, so that from a distance they still resemble an arc but not at all when zoomed in. When clicking on the control points, it goes to looking like a proper arc, but the change doesn't hold after the file is saved and reopened. Is there a program-wide setting to change, or do the properties of each arc need to be changed individually?
View 3 Replies
View Related
Jul 11, 2011
I have a dwg template that has a Multileader Style that uses Annotative text. When I changed a viewport to a different scale....from 1"=1' to 3/4" =1', the text is not appearing to scale. It's very large. The Mtext changed to the correct scale but not the Multileader text. Where do I need to make a change?
View 5 Replies
View Related
Jan 3, 2012
I've got a problem with a title panel that we've created. We're using a new type font - VAGRounded-Thin - however when in paper space and we zoom in and out the text font enlarges or reduces as we scroll in and out with the mouse wheel.It's still coming out fine when printed [pdf and hardcopy] it's just on the screen.
View 9 Replies
View Related
Feb 20, 2012
How do I scale dim arrows and text not the value itself to be bigger. if the dim is 1" I want it to stay 1" but just be larger. In autocad there was a variable I could set to scale to different sizes. does this exist with inventor or do I have to go through style editor and manually change the sizes and save off to a new style.
View 1 Replies
View Related
Aug 7, 2012
i have a structural xref drawing that has all the text 10"high. I xref (overlay) that drawing into another one, but that drawing is going to have a scale 1/4"=1'-0" is there a way to auto scale all the text in to xref to become 4" high?
a bit more information
the structural drawing that im xrefing in will be overlayed over my floorplans, then printed at the 1/4"=1'-0"
I need the structural base drawing to keep the 10" text height because some times i have to print off the entire structural plan separate.
View 4 Replies
View Related
Jun 12, 2013
I have a 50 scale drawing and my section views are 10 scale. The text size is correct in paperspace viewports, but is much too large in model space, and makes it difficult to work on the sections in model space. (I've attached a pdf of sections in model space).
View 7 Replies
View Related
Dec 1, 2006
I am using CAD LT 2005 but also have access to AutoCAD 2005.
I am unsure about the best way of dealing with text in drawings. Originally I used to put my text in model space - which was fine until I started using multiple layouts in paperspace at different scales. The text would come out either to big or too small.
Others in my office say they put the text in paperspace ONLY at the right scale for that layout. This is fine until you realize that if you have to put text in 4 different layouts at 4 different scales 4 different times it takes forever.
So - I looked up about a command called SPACETRANS which seems to offer a way of working out the right scale for the text in paperspace. EG. Working in mm in model space a good text height for me was 1000. By using the spacetrans command in paperspace I worked out that the text height to be used here was 9.2. This basically gave me my text in paperspace at the relatively same height as it looked in model space.
I now realize that although I can scale my text happily to the right size in all my layouts it hasn't negated the need for me to type it all in many times over. Basically, I still have to type the text into paperspace at the right scale - in this example at 9.2.
How you can type your text in once anywhere (probably model space) and then scale it in all the different viewports without having to retype it all in?
View 9 Replies
View Related
Mar 16, 2012
I have successfully created one drawing using annotative dims and text - I have set my text to 1:1 scale, height = 30 in paperspace (although I don't get what this refers to when it automatically says it's 30 in modelspace too) and my viewport is 1:20 scale. It's all good, the dims and text look great, which is what I want at the end of the day, however I got there.
But, when I want to set up another detail at 1:40 scale, I can't for the life of me figure out how to make the same dim and text style appear the same size as it was for the 1:20 detail.
View 9 Replies
View Related
Jul 25, 2012
1st let me preface this with the fact that I know zilch, nada, nil about solid modeling. But I think the easiest way to accomplish what I'm trying to do is thru solid modeling and export the end result as (3D) polyline
What I have is 2 intersecting arcs with varying radii and ucs values. I'm guessing these could turned into regions and then subtract 1 from the other in order to find a list of intersecting points or maybe a splined pline. Or maybe they could be joined. Either way, if I DXFOUT the solids in R12 format, they become plines
I have access to R14 thru 2012
View 9 Replies
View Related
Feb 4, 2013
In paperspace the text are so out of scale and it only shows a specific area of the model view.the other viewports will have a realistic and 2d wireframe.
View 5 Replies
View Related
Aug 15, 2013
I have a drawing that contains texts that are annotative. But I would like to change the scale of the drawing with the floating model space viewport in Paper Space. I know I can individually right click on the text and Add Current Scale to them but is there a way to do so globally?
View 1 Replies
View Related
Aug 24, 2012
I have different annotative dimension on my drawing, when I select one all others dimension show up as you can see on the picture (260 three times ). Is there any solution to select dimension or text without showing other scale?
View 8 Replies
View Related
Jul 19, 2013
I'm drawing a gas line (the one that says gas throughout the length of the line) and i can't seem to scale the text 'gas' properly, it seems that it is all squashing up and i cant make out what it says. I've tried ltscale, psltscale and the actual linetype scale of the line to no avail. I'm sure this is a simple problem, i just cant work it out.
View 2 Replies
View Related
Jan 4, 2013
I have a base plan. The text scale is set to 1"=40' I xref the base plan into a strucural bridge plan sheet and scale the base map x 12 so that i can work in architetural scale. How do I get the text to scale correctly in the xref'd base map that has been scaled by 12 for a 1/8" scale?
View 3 Replies
View Related
Jul 30, 2012
Im pretty new to annotative text. I was wondering how I can make text show in two viewports at two diffrent scales? Also how to I remove scales from text?
View 2 Replies
View Related
Nov 7, 2012
I have a drawing that is 50 scale. However my sections are all 10 scale. When I set my viewport to 10 scale, all my text is tiny. I can go into the style of the section view and change the size, but then it's too large in model space. Nothing I've tried will change the size of my text in paperspace.
Win 7 64BIT
C3D 2013
View 8 Replies
View Related
Nov 12, 2012
What I want is to create a block which contains a bit of text displaying the scale (X scale only) of the block. Then, if I change the block's scale it will also update. Is this possible?
View 9 Replies
View Related
Jan 5, 2013
Whenever I try to trim two intersection arcs who have the same bending direction and similar radius, casue it is extremely hard to click on the parts that need to be trimmed off. See attached pic for reference.
View 2 Replies
View Related
Jun 25, 2011
I've got ObjectIds of a bunch of arcs that I need to convert to polylines for further processing.
I was thinking of using the COM interface and sending the PEDIT command and converting the arcs.
The only problem is I don't know of a way to put the objectids into a selection set, then call the pedit command and use the previous selection.
View 4 Replies
View Related
Dec 24, 2013
Using VB.NET
How to draw connected line arc line arc line and so on, given some points formatted in a file like this
easting northing radius
0 0
10 10 200.00
12 10 150.00
30 20 60.00
50 30 50.00
50 43 60.00
1640.42 1104.30 50.00
1770.20 1100.62 100.00
1850.00 1085.18 100.00
2002.61 1141.46
the output will be like this :
line arc line arc line arc line arc line arc line arc line arc line arc line
View 1 Replies
View Related
Nov 25, 2013
Any plug-ins out there that focus solely on this?
View 2 Replies
View Related
Feb 8, 2011
I want to loft two rectangles using arc as a path , but i cant , 1st i cant draw the arc in 3d so i draw it in "Front" view , then i cant loft the rectangles using that arc as an path -"The selected entities are not valid" , maybe because i draw the arc in "Front"(bottom left), but i cant draw it in 3d?!! Here it is some screen shot:
View 0 Replies
View Related
Jun 16, 2012
i have a problem when rendering 3d objects having arcs. the arc in the rendered photo is not smooth and round !
View 5 Replies
View Related
May 10, 2013
I have included a picture of the drawing. I could draw the 45 radius Arc that goes from 0 degree to 90 degree. The other Arcs somehow i just can't.
View 9 Replies
View Related
Jun 28, 2013
3 lines. 2 arcs. All coplanar, all meet end-to-end.
I set "Units/precision" to 0.00000000 and inspected them. They are all x=0 for each endpoint, therefore coplanar. I also did a point "ID" command and checked each endpoint approaching from both sides and confirmed that each pair of results was identical, so all the ends meet exactly.
I was under the impression that Join or at least PEDIT should be able to combine coplanar lines/arcs that all meet end to end into a polyline. Also, using the Express Tool's "FLATTEN" command doesn't work.
The reason I'm doing this is because I've drawn lines/arcs that trace along the midpoint of a sheet metal's material thickness, and this sheet metal has two bends in it and isn't flat anymore, so converting the lines/arcs to a single polyline will tell me how long the flat plate needs to be that will be ordered to create it.
View 9 Replies
View Related
