AutoCAD Inventor :: Cannot Reorder Regular Parts Browser
Dec 12, 2012
In Inventor 2012 I could grab any part (except patterns of course) and move it anywhere into folders, out of folder, up down, wherever, till my hearts content. But in 2013 sometimes it lets me, sometimes it does not. Sometimes I select a group of parts and when I try to put them into a new folder it will place most of them in it tell me the others are not allowed to be moved? I must stress that these are NOT patterned parts, but stuff I have moved around for at least the last 2 versions of the software. Why in 2013 can I not do this as easily or at all in some cases? Is there a new check box checked by default I can't find? I have tried switching the browser between modeling and assembly view and sometimes it works and sometimes it does not.
It does this with both content center and non content center parts.
Inventor 2013 sp1.1
View 6 Replies
ADVERTISEMENT
Jun 22, 2006
Is there a way to reorder positional representations in the browser. I'd like to keep them in order of how the assembly will function. That way, it's easier to create the animation in Studio. See attached image.
View 7 Replies
View Related
Jun 28, 2013
place a component in the assembly.
create an assembly plane based on the assembly origin planes, (not the component origin planes).
in the browser, try to drag the plane above the component.
its not working on my machine?
View 7 Replies
View Related
Nov 13, 2013
how to turn this feature on? We recently upgraded from Inventor 2011 to 2014 and now this feature has been disabled. The attachment shows that visibility has been greyed out.
View 2 Replies
View Related
Aug 6, 2012
In my Inventor .idw browser my parts have a green arrow next to them but I can't seem do anything with them, I think they might be a refresh icon .
View 2 Replies
View Related
May 30, 2012
When copying an iam + ipn, and making some changes, the browser suddently shows far too many parts or assemblies ?
Is there a way to "update" the browser?
View 2 Replies
View Related
Sep 5, 2012
I have a section view of an assembly. The parts of the assembly that are completely remove via the section no longer show up in the browser. Is there a way to make them show back up in the browser and/or section view? They are internal to the assembly and I would like them not sectioned/removed from the view.
View 3 Replies
View Related
Nov 17, 2012
Alpha sort in assembly bonus tool sorts outside browser folder. Is there any method (API) to sort inside browser folder?
View 3 Replies
View Related
Aug 4, 2011
I have an assembly model which I have `save copy as` to create a new assembly (80% parts the same). I have opened my new assembly and deleted/replaced parts and assemblies that I do not require.
One (released) assembly I have deleted is still showing listed in the vault browser (not in model browser). It is not in the model, is not revealed by `find in window`, is not listed in the bill of materials. If I close my assembly and reopen it is still listed there.
This has now occured in two assemblies. I have never experienced this before in many years of use. We recently upgraded to Inv 2011 and VM Pro 2011 and I'm wondering if there is a connection.
View 6 Replies
View Related
Mar 2, 2012
Some parts properties of one project has partially or completely grey in browser.
Nothing special had happened prior to this problem. It happened with some absolutely irregular and not systematic affection as like a fallen and broken ink bottle makes something completely colored and some other stuff just partially and some not.
I mean some parts properties are completely grey and some have just several grey properties while some other are not affected (see video link)
It is a permanent bug and seems it belongs to the part itself since the reloading Inventor and windows and Task Scheduler attempts to fix it - all gray colors stay exactly where they were before and in same irregularity. Opening the affected parts in other project gave the same result as in original one.
[URL]
View 2 Replies
View Related
Sep 19, 2012
When I suppress a part or a sub-assembly in Inventor 2013 and then right click on the suppressed item in the browser window I always get an cadabundus error message (see attachment), after I press OK I get the normal right click menu hovering over the item.
I have Inventor 2013 RTM 64 bit Build 138, and running on Vista 64bit.
View 2 Replies
View Related
Oct 29, 2012
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies
View Related
Apr 8, 2013
I am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
View 1 Replies
View Related
Nov 7, 2011
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
View 1 Replies
View Related
Sep 20, 2012
I was trying to create a design template in the Multibody Part environment (MBP) for design cases we use almost every day.We´re relying heavily on semi-finished products (plant construction), so 80% to 90% of our parts are plates, beams, pipes and similar. In most cases we create a welding assembly which has only the semifinished parts which are welded together.
What I expected from the MBP was to be able to preconfigure properties like materials and width, length and height before I create parts which then are placed into the assembly.
Now this doesn't work. So I have created some iLogic code that finds the base dimensions of plates (thickness, length, width) and adds this information to the custom properties so it shows up in the BOM.
This works with a template which I have added to this thread. Now what you do is choose this template for the solid bodies which are plates when you derive your parts after you have finished setting up your MBP.
In the template I have embedded an excel sheet, that searches for a numeric thickness value (discrete) in the "thickness" column.After finding the according entry in the excel sheet it will read out the item number from that column and writes it back into the custom properties.
We're using a PDM system the files get uploaded to and if the PDM system finds a known item number it will automatically connect the documents to the correct item master.
Right now this works only with one material for every template. Additionally I want to be able to get a prompt before the part get's saved, that asks me to define a material based on the data of my style library. How to do that with iLogic code pieces?I will work on this further and will update the thread with new functionality.
View 5 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Mar 30, 2012
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
View 9 Replies
View Related
May 2, 2013
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
View 4 Replies
View Related
Aug 21, 2012
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Aug 7, 2013
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
View 2 Replies
View Related
Dec 9, 2013
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
View 3 Replies
View Related
Jul 10, 2012
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
View 2 Replies
View Related
May 3, 2013
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 5 Replies
View Related
Sep 22, 2011
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
View 2 Replies
View Related
Jul 25, 2012
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies
View Related
Dec 1, 2013
I want to modify the default Profile Grade Break label style that comes with the product as I don't want the line component in the style. When I delete the line component I have to reconfigure the attachment points of the remaining components. I want the marker to attach to the feature, then the PVIS to the marker, then the PVIE to the PVIS. The problem is these components are in the wrong order in the style and thus I can't get the PVIE to be left aligned with the PVIS. There apparently is no way to re-order the components in the style. The only solution seems to be to delete and recreate them in the proper order. Is this the case? If so then there defintely needs to be an enhancement in the product to change the order.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
View 9 Replies
View Related
Jun 6, 2012
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies
View Related
Oct 31, 2005
After spending a lot of time creating a particular dynamic block, I realized that the order of custom properties of this block as shown in the Properties Palette is not organized in an optimal order.
For example I have "Cabinet Width" at the top of the custom properties list, and "Cabinet Height" way down near the bottom. This is going to make my Cad operators hunt around too much for the property they need to adjust.
The apparent order is by creation - first created custom property is listed first, last created is shown last. I really don't want to remake this dynamic block just to get the properties in a logical order.
I was wondering if it is possible to reorder the custom properties as shown in the properties palette?
View 9 Replies
View Related
May 29, 2013
When you place a part (let’s say structural steel part) from content center as a custom part and later change the part size, the browser still shows the old part name which makes it very confusing when scanning through the browsers when you're trying to find something. It makes it almost unusable if you can’t trust the description. How do others handle this? I know about browser rename but that won't work because it defaults back when you close and reopen.
View 4 Replies
View Related
Nov 1, 2013
I am getting the i symbol in front of my 3D sketch in the browser bar. Unlike a 2D sketch which I can open and run sketch doctor, I am unsure how to resolve issues with this sketch.
View 1 Replies
View Related
Nov 15, 2012
I have many symbols next to the bolted connections in my browser in Inventor 2013 which I do not see changing. what these stmbols mean and why there are there ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 4 Replies
View Related
