I have many symbols next to the bolted connections in my browser in Inventor 2013 which I do not see changing. what these stmbols mean and why there are there ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have the attached symbol next to parts in an assembly, I'm not sure what this is, I have updated all components in the assembly and checked that in the sketch doctor for error however there are none.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I don't remember... what is it?
How can i create it...and why?
When I create a weld, the browser is populated with default weld numbering. If the welds are deleted then reinserted, the numbering does not reset and can make using the "create weld symbol" option confusing.(see attached screenshot) How to reset the browser call out without manual override?
View 4 Replies View RelatedI opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View RelatedI am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
The attached picture is me trying to balloon a part. I would like to just add some notes to the balloon so that I can update them manually but all I can find is to have a symbol. So I created a symbol, the insertion point for the symbol is shown. For some reason I get an extra number and the symbol offcenter. Why is this happening? What I'm really looking for is a balloon that is fully customizable so that I can just add text to the top and bottom and fill out the details.
View 5 Replies View RelatedWhen you place a part (let’s say structural steel part) from content center as a custom part and later change the part size, the browser still shows the old part name which makes it very confusing when scanning through the browsers when you're trying to find something. It makes it almost unusable if you can’t trust the description. How do others handle this? I know about browser rename but that won't work because it defaults back when you close and reopen.
View 4 Replies View RelatedI am getting the i symbol in front of my 3D sketch in the browser bar. Unlike a 2D sketch which I can open and run sketch doctor, I am unsure how to resolve issues with this sketch.
View 1 Replies View RelatedWhy sometimes we have an asterisk (a star) after the file name in the browser (in "Vault mode")? see attachment
View 1 Replies View RelatedWhat does the red up arrow next to extrussion features indicate?
View 2 Replies View RelatedI just popped off to a meeting, and when i returned the Object Browser has disappeared from my screen and i can't get it back. Where it might have gone or how i can get it back.
View 9 Replies View RelatedI am attempting to rename a browser node. Here is the code I'm using and I'm getting a "Property 'Label' is 'ReadOnly'" error. In the API I found a note about using SetLabel() but that seems to only have ones for ClientMade browser nodes.
oSubAssyNode.BrowserNodeDefinition.Label = "XXX"
Inventor 2010 / I'm finding myself scrolling up and down the browser bar quite a lot to get to the Solid Bodies folder for example, and I was wondering if it was possible to group features into folders or something to make the journey quicker, with the benefit of also being able to just organize things a bit better.
View 9 Replies View RelatedI am trying to suppress browser folders per the API with no luck is this even possible. I would also like to control its BOM Structure.
View 1 Replies View RelatedHow to enable model browser in Autocad Inventor Professional 2014 Student version ?
View 2 Replies View Relatedhow can I make a folder in the browser in the part modeling and put something like extrude,revolve & ... in the folder? (not in the assembly)
View 1 Replies View RelatedI use Inventor 2013 as a single user, my company is about to invest in Vault and we are about to introduce a new automated Part Numbering Scheme as well.
I use a spreadsheet and iLogic rules as ‘Product Configurator’ to generate new iterations of my master assembly.
Now, the Assembly Browser in Inventor may display my assembly tree and its components by Part No or File Name or Default Browser Nod. See attached image.
This can be selected and set on the ribbon: click Assemble tab Productivity panel Rename Browser Nodes.
For example at Top Level Assy I have a rule to run other rules in components. Should I change the displayed components names on the Assy Tree the rules loose reference. So they wouldn’t run.
(for example: iLogicVb.RunRule("PANEL ASSY 2ndS:1", "Tie Rods & Washer Plates 2ndS")
PANEL ASSY 2ndS:1 is a component with a rule in it "Tie Rods & Washer Plates 2ndS"
This is the default Browser Nod Name and it could also be
- AAA-0111 --> Part No
- PANEL ASSY 2ndS.iam:1 --> File name
- PANEL ASSY 2ndS:1 --> Default
I suppose this can be avoided by not changing from Default, but what an inconvenience should we have to.Unless if there is an other way to reference our components in iLogic?
I changed the name of a valve manually in the browser. Now, when I copy the valve to a different part name it does not update the name of the new part in the browser. How do I get the part name in the browser to be dynamic again?
View 5 Replies View RelatedMy browser is gone. When toggled, it does not show up. I ushally have two screens, but when i have it on only one screen it disappers completely. My laptop is set to " Laptop display" Only mode. I bring up Inventor, and my browser will not toggle on and off on the screen even though the box is checked, and unchecked.
View 2 Replies View RelatedCode that can provide basic information of the highlighted browsernode on the browser bar? i can get a mouseclick but not sure on the mousemove.
View 2 Replies View RelatedIm working on something just now but ran into a problem when a new sheet is added after one that is excluded from count.
What i need is to re sort the sheets in the browser so the excluded ones go to the end. Im thinking i would need to loop through the browser nodes somehow but the skills elude me.
Search for features by name from browser. I have seen a pair of binoculars on the top of the feature tree, can't figure out a easy use of it.
C1
Inventor Professional 2013
Vault Collaboration 2013
Is the alpha sort function available trough API ? It's located in Assembly tab, Productivity tools. I'd like to use it in a custom program instead of asking my customer to click on the button.
View 2 Replies View Relatedhow to turn this feature on? We recently upgraded from Inventor 2011 to 2014 and now this feature has been disabled. The attachment shows that visibility has been greyed out.
View 2 Replies View RelatedWorking on a product configurator using iLogic and have a large amount of hardware that needs to be suppress or unsuppressed based on certain parameter choices. Instead of creating hundreds of lines of code suppressing and unsuppressing the hardware one by one, I was hoping to put hardware into folders based configurations. In my mind this would have allowed me to have one line that would suppress the folder as needed. Unfortunately I cannot figure how to suppress a folder in iLogic as I saw someone else mention I was hoping for a "Folder.IsActive" rule but have yet to find one.
Inventor 2013
In Inventor 2012 I could grab any part (except patterns of course) and move it anywhere into folders, out of folder, up down, wherever, till my hearts content. But in 2013 sometimes it lets me, sometimes it does not. Sometimes I select a group of parts and when I try to put them into a new folder it will place most of them in it tell me the others are not allowed to be moved? I must stress that these are NOT patterned parts, but stuff I have moved around for at least the last 2 versions of the software. Why in 2013 can I not do this as easily or at all in some cases? Is there a new check box checked by default I can't find? I have tried switching the browser between modeling and assembly view and sometimes it works and sometimes it does not.
It does this with both content center and non content center parts.
Inventor 2013 sp1.1
When working in an assembly model or part my 'find in browser' command has disappeared under the right click menu - why and how to retrieve it?
Inventor Professional 2013.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have one doubt i have one big assembly in that more than thousand parts.
my doubt is how to find particular part in browser bar.
like how to search particular part number in browser bar.
I need to make installation plans on climate ceilings, which are steel cassettes with Meandro tube element located where cold or hot water is flowing through.
[URL]......
Now it may occur that a cassette is given a code 700 which represents the type of cassette. If inside the cassette is placed a Meandro element its become a follow number eg 700-01.
It may also be that the same cassette No. 700 gets another Meandro element and because the cassette has not changed shape the number 700 remains the same but the follow number change e.g. 700-02.
At the moment I change the number in the browser,(inv2012) I therefore want automatically the iproperties ,partnumber and stock number, to fit. When I go to the BOM, the part- and stock numbers automatically will be placed.
The browser codes are not displayed in the BOM. So if I specify for change I only have to do so in the browser. I wanted to do so by iLogic but then ran into problems. I found a tutorial from Rob Cohee with ilogic so you won’t forget to fill in your iproperties.
[URL].......
I also wanted to do so with the iproprtie Stock number but get an error stating that I must declare the name. How must i declare a name.
Also i was told for entering the browse name in ilogic i had to use displayName, but I get a error stating that the name is Read Only.
So how can i, after i change the browse name, automatically fill in the iproperties ‘part number and/or stock number? Is there an ilogic code for?