AutoCad 2D :: Two Arrows On Diameter Dims
Sep 21, 2011
By some setting or default, when I dimension a diameter in Autocad 2010, I get a dim line that only has one arrow that points to one side of a circle, just like a radius. I'd like the diameter dims to have an arrow on both sides of circles.
I've been through the settings in Dimstyles. and didn't find a combination that made the desired change. I've looked at the properties for a specific diameter dimension and found nothing that worked there. I looked into block modifications using BEDIT and Properties, but I found nothing there either. While I may have overlooked a combination of changes in Properties, I tried a lot in there.
View 7 Replies
ADVERTISEMENT
Dec 17, 2013
I have received details that have been blocked that I need to edit. When I expode or burst them, the dims text and arrows grow larger than is required for the block and I cannot find any adjustment in the properties to bring them back to the correct size for the detail. Also the leaders lose their point and association with their text and become just a line.
Is there a command that will allow me to edit the block without loosing the current sizing and associations?
View 2 Replies
View Related
Aug 17, 2011
Sometimes when I plot/publish a DWF or PDF the arrows extend past the extension lines. I need the point of my arrows always end at the extension line?
View 1 Replies
View Related
Nov 15, 2012
28037_001 Ammended showing services copyupload.dwg28037_001 Ammended showing services copyupload.dwg
I having a problem with the attached drawing. The dimension I draw up in model space is not appearing in the layout tab. Its appearing as a heavy blue line & is ineligible in the layout tab. How can I fix this?
View 4 Replies
View Related
Mar 8, 2013
If I use a linear dimension, and the value works out to something like 4'-1/2", Autocad will display 4'-01/2".
This is the documented behavior per autocad documentation:
Link to Documentation
"If feet are included with a fractional inch, the number of inches is indicated as zero, no matter which option you select. Thus, the dimension 4'-3/4" becomes 4'-0 3/4"."
It is also an extraordinarily silly behavior. How can I force my dims to display 4'-1/2" other than exploding them and editing by hand? ( or by using the "text override" feature )
View 7 Replies
View Related
Jul 4, 2012
i'm trying to produce a layout using solview and soldraw in autocad 2013, but have come across a very frustrating problem, autocad lets me create the top, side and front view no problem, when i start to dimension the views the dimensions in the top and side view are fine but the dims in the front view are invisible, the command works as normal but no dims are visible, i have checked the freeze/thaw for all views but to no avail, the only other thing i can think of is that autocad has created an incorrect view and i'm dimensioning something that i simply can't see, if this is so how could i get around it.
View 9 Replies
View Related
Dec 20, 2013
Apparently we're using ordinate dimensions in a way that was not intended, but that makes perfect sense to us. We work with building elevations and sometimes, though not too often, there are points that fall below the zero elevation. But when we put an ordinate dim on these points it is noted as a positive number.
Is there some way to get these to show with a negative sign? For example, -4'-3"
View 2 Replies
View Related
Aug 16, 2012
I know it is a simple thing but for the life of me I cannot make it work. I must of hit a button and messed it up.
Annotative dims and text. I have multiple view ports ranging from 1/8 to 1-1/2 inch scale in one paper space. I have noted items (in model) and need them to appear in the different scaled VP's. However, too much is showing up. All scales in all vp's are active, not just the scale of the vp.
View 5 Replies
View Related
Apr 3, 2012
We have a base drawing that is xreffed into other drawings, it is made up of various building sections (some horizontal some vertical). We have dimmed the grids using linear dimensions. When we bring in the drawing as an xref and rotate it 90 degrees (so the vertical sections are now horizontal) all the dims are now upside down.
Is there a variable/method to stop this from happening.
View 3 Replies
View Related
Oct 27, 2011
I used to be able to edit the dimension to include background mask and suddenly cannot.
i really need the BGM.
View 9 Replies
View Related
Jul 3, 2013
I've set up a load of dim styles for varying scales i.e 1:1 through to 1:50.Now the text height is set to 2.5 on 1:1. However when I have changed a dimension string to the dimstyle the text changes to 0.625!?
But if I draw a dim from scratch it's correct.The dimensions are not annotative. When I open properties bar the text height is stated at the desired 2.5 but when I double click to edit text it says 0.625.
Now I can't be bothered to go through my drawings and double click to edit the text hieght or redraw all my dims I just want to 'matchprop', but it's matching!
View 9 Replies
View Related
May 17, 2012
Just installed 2013 and have a couple of buggy problems.
1.I can't double click on dims to add / edit text. I've added / changed the cui double click settings but that does work.
2.The new array command does bring up the associated ribbon panel after the array has been created. I can get this to work while using Civils as AutoCAd, but not as Civils?
View 1 Replies
View Related
Mar 17, 2011
For some reason, I cannot dimension in paper space. i beleive I have set everything up correctly, but the dimensions in paper space are not correct.
See attachement.
The circle is 12" in diameter, but if the viewport is 1:2 scale, the diminsion in paper space shows 6". what do i need to do to correct this?
View 1 Replies
View Related
Nov 9, 2012
Don't think this is a dimassociate problem because dimensions of model are fine in paper space. So I save drawing, even tried regen, then export to pdf for customer, and most of the pdf dimensions are jumbled and in paper space scale. Dimenions are not annotative.
View 9 Replies
View Related
Mar 7, 2013
In earlier releases of Acad, when Dimensioning, I could bring a new dim inline with an existing dim and the with using osnap align the new dim with the existing dim. With 2013, I can not get the osnap pick box to appear on the existing dim to be able to keep all my dims inline.
View 4 Replies
View Related
Jul 17, 2012
I have some radial dimensions that I want to change to my current dimstyle. I can not see a way to change them. If I select one and check it's properties, the "Dim Style" biox is greyed out and can not be changed.
View 5 Replies
View Related
Oct 24, 2013
how to flatten or z values to be done zero for rotated dims & splines?
when if u r viewing dwg in isometric views for keeping all the z values zero. commands for acad2011 format?
View 9 Replies
View Related
Sep 30, 2013
You know how you have a line/thread of Dims going across all the walls of a building?
Well, sometimes I need to adjust the placement of the line, and then I need to go back and select every-single-little-dimension in that line. Isn't there a way to bind them all together, so that they can move as one continuous line of Dims?
(When I make them, I make the first Dim with the Linear Dim tool and then do Continue to make the rest of the thread).
View 9 Replies
View Related
Mar 16, 2012
I'm using a VLISP program to generate some drawings. That is to say that absolutely no "user input" is allowed from the moment the first line goes in until it saves the file with a new name under a different directory. The process does open up a template where we have dimstyles and text styles already defined. But none of them are annotative.
In an effort to make this process more up-to-date, I'm attempting to change all the text and dimension styles to be annotative.
There are three layout tabs in this drawing file. One for 11x17 with a viewport set at 1:16 scale, one 17x22 with a viewport set at 1" = 1'-0" scale and one 24x36 with a viewport set at 1:8 scale. I need all the objects in model space to show up in each viewport with the text and dimensions using the annotative feature so the will all have the same size text height of 1/8".
As I experiment with this, I find that I can set the Annoscale for the model at say 1:16. Then all the annotative dimensions and text created by the VLISP code have that annotative scale built-in by default. What I need is for them to also have the other two annotative scales attached to them so they will show up in all the viewports, not just the first one on the 11x17 tab which is set a 1:16 scale. Of course I can manually add these annoscales to the text and dimensions, but then that totally defeats the purpose of the automated drawing process.
I've toyed around with AnnoAutoScale but that again is a manual process and it only add the annoscales when I change the model space annoscale. I guess that perhaps after everything is drawn I could go a have the VLISP code CANNOSCALE the model space two more times for the other two annoscales. My thinking is that would automatically add the annoscales to all annotative objects in the model and thus they would then appear in the viewports.
View 0 Replies
View Related
Aug 3, 2012
I have several rectangles in a drawing which have the same dimensions, is it possible to perform a multi select of these items by specifying the lenghts of the rectangles ? I can't see a way of doing this under QSelect or Filter.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 8 Replies
View Related
Feb 9, 2012
I am still green at lisp creation. I would like to create a lisp to change my cannoscale to match that of an existing dimension in model space. we use tabs and therefore have many different scales for the vports in our drawings. i want to be able to type my command, have acad ask for a annotative dimension to match, i click it, then the lisp resets my cannoscale to match.
View 4 Replies
View Related
Feb 27, 2012
I'd like to show feet/inches with arch units even when i have a whole number measurement. right now the dim for 16' shows as 16' only. i want it to show as 16'-0"
View 3 Replies
View Related
Jun 27, 2013
For some reason I have it in my head that you can put all of your text and dims on in model space, then when scaling your viewports the dims and text will re-size its self automatically for that viewport setting. I.e text will be 25 in model space, but in vieports it will plot at 10 or 2 depending on the viewport setting.
View 2 Replies
View Related
Mar 12, 2012
Where is the setting to control the size of dims in the IPT sketch environment. The arrow sizes are OK, but the dims are so small they are unreadable to the point of having to double click on the dim to get the actual value.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
View 2 Replies
View Related
May 10, 2011
What I am attempting to do is: add text, some dims., and some info. to a viewport i have added to a drawing for my field guys. I am a sheet metal worker and have produced a drawing of duct work. one viewport is a plan view, one is a swiso, and another is a left-elevation view. everything is good except the left-elevation view which I would like to add details to. I am assuming I need to change the ucs so that i can place lines, dims and text and get them to show up without them snapping to 0 z.
View 9 Replies
View Related
Mar 14, 2013
When i attempt to change any value of any dimension style, i am no longer given the 'Ok' option to finish and close the dialogue box. Instead i get an error code.
I recall that it arose when using civil 3D 2013 (which i've since uninstalled) and has continued into AutoCAD 2012 (installed post civil 3D 2013 uninstall).
View 5 Replies
View Related
Jul 18, 2012
Whenever I put the object setting to "realistic," the whole viewport screen dims down until its almost pitch black. It returns to its normal brightness only when you zoom in or out, pan around the view, or when an object in the viewport is modified. I've attached two images along with the post, showing how the viewport appears before and after it dims down.
I'm wondering whether this an actual intended feature of 3DS Max, or if it's a problem.
View 2 Replies
View Related
Nov 15, 2013
Toolspace > Settings > General > Label Styles > Line
When I create a line label, one of the components available is “Direction Arrow”. This component is not available for “Curve” labels. I would really like to use C3D labels to indicate direction (I realize curves don't have a 'direction', but I don’t mind manually flipping and reversing the arrow). Is there any other label option in C3D that will draw a direction arrow for curves?
View 2 Replies
View Related
Oct 20, 2013
When I did the confirmation after I drew the arrow, it shrank to be small. Like the pictures attached.
View 9 Replies
View Related
Jul 3, 2012
I am using MEP 2011 and have started a new project. Having gone to use the above tool, i am getting no text for the dimension nor the customary arrows at each end of the duct piece i am measuring.
I have attached a small jpeg to illustrate. The dimension is the green line.
View 1 Replies
View Related
Jul 2, 2012
I noticed a post a few years ago mentioning this function wasn't available then. Is it still not available? Is there a routine? A lisp? An expression that I can make to put a slope arrow inside every tin in my surface with a % grade?
View 1 Replies
View Related
