AutoCad :: Line / Thread Of Dims Across All The Walls Of Building
Sep 30, 2013
You know how you have a line/thread of Dims going across all the walls of a building?
Well, sometimes I need to adjust the placement of the line, and then I need to go back and select every-single-little-dimension in that line. Isn't there a way to bind them all together, so that they can move as one continuous line of Dims?
(When I make them, I make the first Dim with the Linear Dim tool and then do Continue to make the rest of the thread).
View 9 Replies
ADVERTISEMENT
Mar 1, 2013
I have an assignment to draw a bathroom. I have walls that are spaced 3 5/8 inches apart and the drawing shows insulation batting between them. When I use the batting insulation linetype and run a line between the walls the batting symbol extends beyond the 3 5/8 inch walls. how do I get it to fit between?
View 9 Replies
View Related
Nov 9, 2012
When making a line longer with no dims on the line whats the best way to do this? Stretch command or grab one end point and type the legnth you want the line to be longer by? ie: 2" long line needs the be 2-1/2" long
I will use the stretch command without problems. 2" long line: stretch command: type .5, line is now 2-1/2" long
We have a drafter (uses 2011LT) that will grab one end point stretch the line in the direction they want the change, type the added length and the line goes to the added length..2" long line: grab right side point stretch line to right: type .5, line is now 1/2" long
They use quick properties but they don't type the change in it, they type it in the command line.
They donot stretch first they just grab the point and move to the right and type .5" and the 2" line is now .5" lone when it should be 2-1/2" long. They do not have the dynamic input on. could that be the issue? When I do the same my 2" line becomes 2-1/2" long. What would be causing the difference? This just started a few days ago after we did the update for 2011LT
View 4 Replies
View Related
Oct 4, 2012
I'd like to use an "NPT" Hole Dialog thread but it doesn't show up in the Thread type list.But it does show up in the Thread Dialog/Specifications Tab/ Thread type list so it's available.
I definitely have "NPT" in my Thread.xls & I have my Options/Files set to point to the correct Design Data folder.
Inventor Suite 2013 Ultimate
View 6 Replies
View Related
Apr 22, 2013
My colleague installed IV2013. He has excel 2010 installed in his PC also. However he cannot create thread hole (thread option is grey out).
View 4 Replies
View Related
Jul 18, 2012
Autodesk Inventor 2013.
Could not find file C:Program FilesAutodeskInventor 2013Design DataXLS13XLSen-USThread.xls containing thread data.
View 3 Replies
View Related
Mar 1, 2011
I can drill a hole as needed, but can't thread a hole at all. Not with the Tapped Hole function when drilling the hole, or after drilling the hole then using the Thread Tool. Inventor will just not let me create threads this way outside of cutting a coil.
View 9 Replies
View Related
Jun 13, 2013
I am trying to add a thread class to the thread.xls. (that part is ok)
The thread is M26x2.0
I can't seem to find any information for me to simply plug in the values into the .xls, so I am thinking that I have to crunch some numbers. which is fine. I just want to make sure that this image below is the correct the reference for this task.
using the pitch, I should be able to calculate all my min and max values, but the xls has class column and a tap drill column, how would I determine these values??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 6 Replies
View Related
Nov 28, 2012
I have forgotten how to draw a line that is parallel to a building wall which is not either horizontal or vertical.
View 9 Replies
View Related
May 18, 2012
I am using Autocad LT 2013 and Autocad Architecture withing the same office. When I open a file that has an Xref from Autocad Architecture with 3D walls in Autocad LT, the walls only show as 1 line instead of 2. If I open the orginal file that the Xref came from, with Autocad LT the walls show up just fine (as blocks instead of 3d walls as I expected). I am hoping to be able to veiw the Xrefs correctly in Autocad LT.
View 7 Replies
View Related
Jun 22, 2011
I am trying to draw a needle and thread showing a curved line as the thread with parallel lines so I can show where the thread crosses over itself. This is used as a stitching diagram.
View 3 Replies
View Related
Apr 20, 2013
how can i draw this plan without knowing the angles for each wall? when i draw , the last wall is incorrect can autocad adjust the angles of walls for me after typing the length of the walls ?
DEST2109.jpg
View 6 Replies
View Related
May 6, 2013
I created a new wall type that includes Stud, Sheathing, and Rigid Insulation. I need to show the existing CMU walls cutting through the new Stud walls. Can this be done?
View 3 Replies
View Related
May 9, 2011
I am doing some tests to export my model out to IFC. The slabs and walls do not line up. Revit 2012?
View 9 Replies
View Related
Jul 15, 2010
I'd like to build a new wall type that displays with a different line weight than is set in the Cut Line Weight for the Wall objects.
I've been using object overrides to do this, but I'd like to have a wall style the pervasively dispays with a different cut weight than the rest of the walls. So it would have a different weight when cut in section as well.
View 6 Replies
View Related
May 16, 2012
by default revit shows roof plan in the Site plan view.
Is it possible to show site plan that one line would represent building contour? Also is it possible to cast shadows of all the building if the first floor is selected?
i was trying to make site plan from the fist floor, but since i gave intense topography ground is being cut and i need full topography. i am using 2013 revit.
View 2 Replies
View Related
Jan 8, 2013
We r used to have a center line for each separate wall not just for dimension or placing but even visible after plotting and in each view including section , whether it is a structural or partition wall or ... etc , I am new to revit and i fell in love with the software right away, how to display wall center line in views , the only way i found out how to do it is either by drawing model lines or grid lines which will be so dreadful and time consuming if u have 1250 walls in the project . doing it automatically perhaps to be a part of the wall proprieties
View 3 Replies
View Related
May 28, 2013
I want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies
View Related
Nov 15, 2012
28037_001 Ammended showing services copyupload.dwg28037_001 Ammended showing services copyupload.dwg
I having a problem with the attached drawing. The dimension I draw up in model space is not appearing in the layout tab. Its appearing as a heavy blue line & is ineligible in the layout tab. How can I fix this?
View 4 Replies
View Related
Mar 8, 2013
If I use a linear dimension, and the value works out to something like 4'-1/2", Autocad will display 4'-01/2".
This is the documented behavior per autocad documentation:
Link to Documentation
"If feet are included with a fractional inch, the number of inches is indicated as zero, no matter which option you select. Thus, the dimension 4'-3/4" becomes 4'-0 3/4"."
It is also an extraordinarily silly behavior. How can I force my dims to display 4'-1/2" other than exploding them and editing by hand? ( or by using the "text override" feature )
View 7 Replies
View Related
Jul 4, 2012
i'm trying to produce a layout using solview and soldraw in autocad 2013, but have come across a very frustrating problem, autocad lets me create the top, side and front view no problem, when i start to dimension the views the dimensions in the top and side view are fine but the dims in the front view are invisible, the command works as normal but no dims are visible, i have checked the freeze/thaw for all views but to no avail, the only other thing i can think of is that autocad has created an incorrect view and i'm dimensioning something that i simply can't see, if this is so how could i get around it.
View 9 Replies
View Related
Sep 21, 2011
By some setting or default, when I dimension a diameter in Autocad 2010, I get a dim line that only has one arrow that points to one side of a circle, just like a radius. I'd like the diameter dims to have an arrow on both sides of circles.
I've been through the settings in Dimstyles. and didn't find a combination that made the desired change. I've looked at the properties for a specific diameter dimension and found nothing that worked there. I looked into block modifications using BEDIT and Properties, but I found nothing there either. While I may have overlooked a combination of changes in Properties, I tried a lot in there.
View 7 Replies
View Related
Dec 20, 2013
Apparently we're using ordinate dimensions in a way that was not intended, but that makes perfect sense to us. We work with building elevations and sometimes, though not too often, there are points that fall below the zero elevation. But when we put an ordinate dim on these points it is noted as a positive number.
Is there some way to get these to show with a negative sign? For example, -4'-3"
View 2 Replies
View Related
Aug 16, 2012
I know it is a simple thing but for the life of me I cannot make it work. I must of hit a button and messed it up.
Annotative dims and text. I have multiple view ports ranging from 1/8 to 1-1/2 inch scale in one paper space. I have noted items (in model) and need them to appear in the different scaled VP's. However, too much is showing up. All scales in all vp's are active, not just the scale of the vp.
View 5 Replies
View Related
Apr 3, 2012
We have a base drawing that is xreffed into other drawings, it is made up of various building sections (some horizontal some vertical). We have dimmed the grids using linear dimensions. When we bring in the drawing as an xref and rotate it 90 degrees (so the vertical sections are now horizontal) all the dims are now upside down.
Is there a variable/method to stop this from happening.
View 3 Replies
View Related
Oct 27, 2011
I used to be able to edit the dimension to include background mask and suddenly cannot.
i really need the BGM.
View 9 Replies
View Related
Jul 3, 2013
I've set up a load of dim styles for varying scales i.e 1:1 through to 1:50.Now the text height is set to 2.5 on 1:1. However when I have changed a dimension string to the dimstyle the text changes to 0.625!?
But if I draw a dim from scratch it's correct.The dimensions are not annotative. When I open properties bar the text height is stated at the desired 2.5 but when I double click to edit text it says 0.625.
Now I can't be bothered to go through my drawings and double click to edit the text hieght or redraw all my dims I just want to 'matchprop', but it's matching!
View 9 Replies
View Related
May 17, 2012
Just installed 2013 and have a couple of buggy problems.
1.I can't double click on dims to add / edit text. I've added / changed the cui double click settings but that does work.
2.The new array command does bring up the associated ribbon panel after the array has been created. I can get this to work while using Civils as AutoCAd, but not as Civils?
View 1 Replies
View Related
Mar 17, 2011
For some reason, I cannot dimension in paper space. i beleive I have set everything up correctly, but the dimensions in paper space are not correct.
See attachement.
The circle is 12" in diameter, but if the viewport is 1:2 scale, the diminsion in paper space shows 6". what do i need to do to correct this?
View 1 Replies
View Related
Nov 9, 2012
Don't think this is a dimassociate problem because dimensions of model are fine in paper space. So I save drawing, even tried regen, then export to pdf for customer, and most of the pdf dimensions are jumbled and in paper space scale. Dimenions are not annotative.
View 9 Replies
View Related
Mar 7, 2013
In earlier releases of Acad, when Dimensioning, I could bring a new dim inline with an existing dim and the with using osnap align the new dim with the existing dim. With 2013, I can not get the osnap pick box to appear on the existing dim to be able to keep all my dims inline.
View 4 Replies
View Related
