Revit :: IFC Export / Walls And Floors Don't Line Up
May 9, 2011I am doing some tests to export my model out to IFC. The slabs and walls do not line up. Revit 2012?
View 9 Replies
ADVERTISEMENT
Revit :: 2012 - Setting Makes Walls And Floors Disappear When Rendering Selected
Jul 6, 2011What Revit 2012 setting makes walls and floors disappear when rendering is selected?
I have a Revit 8.1 project that renderes the model just fine. When I import it into Revit 2010 it also remders the model but I have to reassign the custom finishes. But when I upgrade it to 2012 and render - the walls and floors are suddenly missing!
See attachment.
Revit :: Change Line Weight Of Cut Walls
Jul 15, 2010I'd like to build a new wall type that displays with a different line weight than is set in the Cut Line Weight for the Wall objects.
I've been using object overrides to do this, but I'd like to have a wall style the pervasively dispays with a different cut weight than the rest of the walls. So it would have a different weight when cut in section as well.
Revit :: Display Wall Center Line In Walls?
Jan 8, 2013We r used to have a center line for each separate wall not just for dimension or placing but even visible after plotting and in each view including section , whether it is a structural or partition wall or ... etc , I am new to revit and i fell in love with the software right away, how to display wall center line in views , the only way i found out how to do it is either by drawing model lines or grid lines which will be so dreadful and time consuming if u have 1250 walls in the project . doing it automatically perhaps to be a part of the wall proprieties
View 3 Replies View RelatedAutoCad 2D :: Line Between The Walls Batting Symbol Extends Beyond The 3 5/8 Inch Walls
Mar 1, 2013I have an assignment to draw a bathroom. I have walls that are spaced 3 5/8 inches apart and the drawing shows insulation batting between them. When I use the batting insulation linetype and run a line between the walls the batting symbol extends beyond the 3 5/8 inch walls. how do I get it to fit between?
View 9 Replies View RelatedRevit :: Turn Mass Walls Into Structural Walls
May 28, 2013I want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies View RelatedRevit :: Floors Not Being Cut In Sections?
Jan 11, 2013We just upgraded a project from 2012 to 2013. After upgrading, there are two floors which do not show up as cut in any sections (they displayed correctly in 2012). The two floors in question appear in the section, but not as cut elements (no cut pattern) and it is showing edges of the floor that should be well behind where the section is cut. One floor is 8" concrete and has been made to slope using the modify sub elements command. The other floor is a variable thickness floor modified in the same way to be the earth below the concrete floor since the topo is not nimble enough to follow the shape of the concrete floor.
I tried remodelling the floors. No luck.
I can model it in a separate file, cut sections in that file and have it display correctly. If I insert or paste that into the main model, it goes back to displaying incorrectly.
Our structural engineer had copied the lake floor into their model which is linked into ours, so I deleted the lake floors in the structural model, reloaded it and then remodeled the floors again. And it worked... in only one of the dozens of sections that show the lake floors! So that's one more than before...
In one of the attached images you can see the sloping lake floor and the earth floor below it as it should appear and in the other image you see them both in elevation rather than section. The 3d image shows the lake floor and the surrounding "earth floors". The center of the lake floor is 7'-0" below the outermost perimeter of the floor.
Revit :: How To Set Two Floors To Display As Translucent
Jan 14, 2013I'm new to Revit, and some how have set two floors to display as translucent - I've checked online, but have not found how to correct this.
Can somone tell me what I have done wrong - and how to fix it?
Revit :: How To Add Surface To Individual Floors On Same Level
May 2, 2012I'm just a novice when it comes to this program, a student in High school so I'm not very familiar with it.
Why is it that when I change one floor's surface (tile,carpet, ect.) and then make a seperate floor on the same floor but with a different surface, it changes BOTH floors like they are instances of each other?
How can I add a surface to individual floors on the same level? Ex. Carpet in living room, Tile in Bathroom.
Revit :: 2013 Crashing When Editing Floors
May 21, 2012My REVIT 2013 is crashing my PC when I click on 'Finish' after editing a floor. Whilst the file is only 38MB I have the horrible feeling that these fatal error happenings may be due to a system shortfall on my machine rather than a software malfunction. I have a Pentium 4 MicroATX M/B 3.0Ghz CPU with 4GB RAM, running on Windows 7 Professional (64bit).
View 9 Replies View RelatedRevit :: Windows / Doors Cut / Join With Floors?
Apr 19, 2012My floor structure has a finish layer of carpet that's a 1/2" thick. When I build this however, my doors and full height windows won't go down to the carpet, they'll go down to the sheathing and the carpet will cut in around it all. So how do I get my carpet to cut itself out of the way of my doors/ windows like it does with my walls? Take a look at the pic (sans walls) to see the carpet intersecting with my frames.
View 9 Replies View RelatedRevit :: Color Mass Floors According To Usage
Mar 2, 2011I assigned to each mass floor an usage, and my schedule functions well . That tool is wonderful, isn't it?
But I would want to display each usage in a different color, to show my client how I am organizing the building. Is this possible? Mass floors seems not to have a color or material property.
Revit :: Label Family Not Showing In Modified Floors
Aug 23, 2011I have an issue with a label family made to represent the room dimensions. When inserted in a room with the floor without slope, the family works fine, but when inserted on a space with the floor modified for slope porpouse the family is not visible. Does the floor slope modify the visibility of the family? See the attached image, where the shower has the floor modified and the family is not visible.
View 1 Replies View RelatedRevit :: Model With Multiple Floors - Edit Underlay
Aug 14, 2013I have a model with multiple floors. When I am in Level 2, with Level 1 as an Underlay I can still edit walls and other objects from Level 1. I know there is a way to lock the Underlay, I just can't make it work. Pinning the entire Level 1 is not an options, because this is not View dependent.
View 7 Replies View RelatedRevit :: Sloped Floors - Join With Horizontal And Put Stairs
Mar 22, 2013I have a situation of one sloped floor connecting two horizontal floors. They build together a continuous surface.
I need to join them and have the layers be continuous along the structure. If they were roofs, no problem, I could use the "roof by extrusion" command.
Should I do that? If I try to use floors.....
When I model them as three separate floors, and then Join them, it doesn't work. meaning that the layers within the floor don't match (well, they can't, in fact! I have to move the floor behind!)
If I model one single floor and then add split lines, and move them... it does work. BUT..... I have a stairs on top of it! the stairs have a different slope than the floor, and i need to build a variable layer that fills the void between the floor and the stairs.
So my hypothesis was: I put a sloped floor through the slope arrow... and then adjust one variable layer to do the inflill...
My dream would be to join then floor and stairs.... The material is the same
Revit :: How To Remove Silhouette Of Lower Floors On Floor
Jun 19, 2013I am trying to create a sheet of floor plans that does not show the next floor down on each floor plan but I can't seem to find out how to do it. My lecturer said it made the floor plans 'confusing and difficult to read' but other than photoshopping them out or something I'm stuck See attachments for exactly what I mean. I have just installed revit achitecture 2014.
View 2 Replies View RelatedRevit :: Can't Cut Walls With Voids
Jun 4, 2013I'm at my wits end trying to cut a wall with a void. I want to chamfer the corners of a wall, but I can't get even a basic void to cut from a wall. I get the error : "This Mass has no solid geometry for its Void Forms to cut. They must be deleted, or solid geometry added and cut." They clearly intersect, what am I doing wrong?
View 2 Replies View RelatedRevit :: How To Tag Rooms Without Walls
Mar 13, 2013How do you tag the rooms that are not fully enclosed by the walls?
View 1 Replies View RelatedRevit :: Clearly Walls Visible
Aug 29, 2012Why Revit 2013 when the walls are installed on some laptops is clearly visible.
View 1 Replies View RelatedRevit :: Certain Walls Can't Fillet
Jun 10, 2012There are certain walls I just can't fillet, what's the reason of it? See attached pict.
View 1 Replies View RelatedRevit :: Joining Walls To Roof
Apr 11, 2013I am currently doing an MEP project and I am tidying up the model at present. I am having problems attaching the walls to the roofs. There could be a simple solution but I haven't found it yet !
I have tried attaching top base etc. but its not working. I only seem to be able to select one side of the roof when selecting where to attach the walls. I have attached 3d pics showing the walls that are extruding & also one of the walls that I am trying to attach.
Revit :: Walls Do Not Appear In Foundation View?
May 2, 2013Just what the title says. Walls dont appear when drawing in plan view but appear in the 3d view. how come??
View 1 Replies View RelatedRevit :: Internal Walls Disappear
Oct 30, 2013I drew some internal walls before adding a floor slab. After adding the floor slab the walls disappeared in plan. I can see them in 3D, in the correct place, but not in plan.
The floor slab is in the right position. To fix the problem I redrew them all, but why did they disappear and how do I prevent it from happening again?
Revit :: How To Enable Passing Through Walls
Oct 23, 2011using zoom wheel on mouse, how do i enable passing through walls, instead of continuing to zoom further and further in on walls
View 1 Replies View RelatedRevit :: Preventing Walls From Joining?
Dec 30, 2011Is there a way to prevent walls from joining?
View 1 Replies View RelatedRevit :: Why Existing Walls Not Plot To PDF
Mar 24, 2013why my existing walls show up fine in my sheet but don't plot to .pdf. I have the view range settings set correctly and all other sheets plot fine.
I thought maybe the roof transparency was the issue but Revit is usually pretty much a WYSIWYG plotting operation and the walls are displaying in the sheet file. Haven't tried plotting to a plotter but it doesn't matter. I need to plot .pdf's.
Revit :: Joining Walls To Roofs
Dec 20, 2012How do you join a square wall to a slanted roof so that the walls are not sticking out of the roof.
View 1 Replies View RelatedRevit :: How To Bridge The Gap At Intersection Of Two Walls
Sep 27, 2012How to bridge the gap at the intersection of two types of wall. I’m wondering which “function” settings are required such that the intersection between two types of all walls (30 cm and 10cm) produce solid line.
View 2 Replies View RelatedRevit :: Lining Up Walls Between Levels?
Nov 25, 2013Do I have to use the Stack Walls family in order to have my walls line up on top of each other between the levels? My walls are all slightly off in 3D view and look messy..
View 3 Replies View RelatedRevit :: Can't Choose Generic Walls
Oct 13, 2011reinstalled revit and when i pick wall I can't choose generic walls.
View 2 Replies View RelatedRevit :: Visibility Of Non-structural Walls?
Apr 8, 2013In my 3D View my walls disappear when I de-select the structural box. Although drawn as regular walls they are store front panels so carry no load other than their own weight. My Visibility Graphics dialog box seems to have limited options for this. Am I missing something? How do I get them to re-appear in my 3D View for rendering without switching them to a structural wall?
View 2 Replies View Related