What Revit 2012 setting makes walls and floors disappear when rendering is selected?
I have a Revit 8.1 project that renderes the model just fine. When I import it into Revit 2010 it also remders the model but I have to reassign the custom finishes. But when I upgrade it to 2012 and render - the walls and floors are suddenly missing!
See attachment.
I am doing some tests to export my model out to IFC. The slabs and walls do not line up. Revit 2012?
View 9 Replies View RelatedI drew some internal walls before adding a floor slab. After adding the floor slab the walls disappeared in plan. I can see them in 3D, in the correct place, but not in plan.
The floor slab is in the right position. To fix the problem I redrew them all, but why did they disappear and how do I prevent it from happening again?
Certain exterior walls ghost out / disappear in plan when hosting a split face. This doesn't happen on all walls, and it suddenly appears on walls that were performing fine.
View 5 Replies View RelatedI have been trying to render my linked files in Cloud. For some reasons the linked files walls are misplaced in the drawing. Please take a look at the attached file.
What I have tried to do to resolve the problem and have not worked:
1.Reloded the links.
2.Created new camera views.
3.Tried to use RVT Link Display Settings and rendered with both 'by host view' and by 'linked view'
4.In proprties; tried to use the different Dicipline Settings.
5.Tried to use the different settings in Manage Links to either attachment/overlay under Reference Type or absolute/relative under Path Type.
I'm using Revit 2014.
Windows 7 64. New Sager, Nvidia 675--up to date everything. Revit 2013 fresh download, very little else on new computer. All drivers and bios up to date.
Samsung monitor, same resolution on both main and secondary monitor.
I've heard of many who have had this issue particularly in the secondary monitor. Not sure what to do.
Essentially, wall jumps 3 to 5 feet when I click on it after it has been drawn. I don't seem to have the same issue if I run revit from the main monitor..
Have the same issue whether i run Revit from the Intel or Nvidia High Performance mode.
Rendering at high quality, exterior sun only, 150 DPI and the image is about 9' tall x5' wide. Everything goes great until it hits 26%. Then the bar goes full on 100% but the image is only 26% rendered.
I have a 2gb video card, 4.1Ghz overclocked processor and about 8GB of RAM. Perhaps I havn't allocated enough memory to render an image of this size?
I have a building plan that needs to be in 1:100. When put my drawing into the new layout its there. Then when I change the scale, my drawing disappears.
View 3 Replies View RelatedI try to zoom into an object with my mouse and it disppears. I zoom out and it reappears but it's too far away, I zoom in again and it disappears. Why is it doing this? I click zoom object and that works but I don't want to do that every single time and even that isn't zoomed in enough.
View 9 Replies View RelatedHaving problems with their line stroke disappearing when they apply an arrowhead style?
View 11 Replies View RelatedCropping and saving makes my images disappear in CS5 Extended
View 4 Replies View RelatedBasically, when I Insert Edge Loops this morning, all of a sudden part of my object disappear. how to use the Hypergraph or how to get rid of whatever is causing this glitch.
View 1 Replies View RelatedAdobe Photoshop Elements 10 for MAC.
When I select content using the crop tool then hit enter (or the green checkmark) the picture just disappears. This happened all of a sudden a few days ago. I can do COMMAND Z to undo and the picture reappears. But every time I crop the picture disappears and the layer thumbnail just turns brown.
I want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies View RelatedI just put in a new Radeon 5770 card (PCI slot 1) into my Mac Pro 2008 Quad Core which is running Photoshop CS3. Now, the cursor (on all tools) disappears when mousing over any open PDS document. In Indesign, the cursor for all tools shows and works - as well as other pragrams.
View 5 Replies View RelatedWe just upgraded a project from 2012 to 2013. After upgrading, there are two floors which do not show up as cut in any sections (they displayed correctly in 2012). The two floors in question appear in the section, but not as cut elements (no cut pattern) and it is showing edges of the floor that should be well behind where the section is cut. One floor is 8" concrete and has been made to slope using the modify sub elements command. The other floor is a variable thickness floor modified in the same way to be the earth below the concrete floor since the topo is not nimble enough to follow the shape of the concrete floor.
I tried remodelling the floors. No luck.
I can model it in a separate file, cut sections in that file and have it display correctly. If I insert or paste that into the main model, it goes back to displaying incorrectly.
Our structural engineer had copied the lake floor into their model which is linked into ours, so I deleted the lake floors in the structural model, reloaded it and then remodeled the floors again. And it worked... in only one of the dozens of sections that show the lake floors! So that's one more than before...
In one of the attached images you can see the sloping lake floor and the earth floor below it as it should appear and in the other image you see them both in elevation rather than section. The 3d image shows the lake floor and the surrounding "earth floors". The center of the lake floor is 7'-0" below the outermost perimeter of the floor.
I'm new to Revit, and some how have set two floors to display as translucent - I've checked online, but have not found how to correct this.
Can somone tell me what I have done wrong - and how to fix it?
I'm just a novice when it comes to this program, a student in High school so I'm not very familiar with it.
Why is it that when I change one floor's surface (tile,carpet, ect.) and then make a seperate floor on the same floor but with a different surface, it changes BOTH floors like they are instances of each other?
How can I add a surface to individual floors on the same level? Ex. Carpet in living room, Tile in Bathroom.
My REVIT 2013 is crashing my PC when I click on 'Finish' after editing a floor. Whilst the file is only 38MB I have the horrible feeling that these fatal error happenings may be due to a system shortfall on my machine rather than a software malfunction. I have a Pentium 4 MicroATX M/B 3.0Ghz CPU with 4GB RAM, running on Windows 7 Professional (64bit).
View 9 Replies View RelatedMy floor structure has a finish layer of carpet that's a 1/2" thick. When I build this however, my doors and full height windows won't go down to the carpet, they'll go down to the sheathing and the carpet will cut in around it all. So how do I get my carpet to cut itself out of the way of my doors/ windows like it does with my walls? Take a look at the pic (sans walls) to see the carpet intersecting with my frames.
View 9 Replies View RelatedI assigned to each mass floor an usage, and my schedule functions well . That tool is wonderful, isn't it?
But I would want to display each usage in a different color, to show my client how I am organizing the building. Is this possible? Mass floors seems not to have a color or material property.
I have an issue with a label family made to represent the room dimensions. When inserted in a room with the floor without slope, the family works fine, but when inserted on a space with the floor modified for slope porpouse the family is not visible. Does the floor slope modify the visibility of the family? See the attached image, where the shower has the floor modified and the family is not visible.
View 1 Replies View RelatedI have a model with multiple floors. When I am in Level 2, with Level 1 as an Underlay I can still edit walls and other objects from Level 1. I know there is a way to lock the Underlay, I just can't make it work. Pinning the entire Level 1 is not an options, because this is not View dependent.
View 7 Replies View RelatedI have a situation of one sloped floor connecting two horizontal floors. They build together a continuous surface.
I need to join them and have the layers be continuous along the structure. If they were roofs, no problem, I could use the "roof by extrusion" command.
Should I do that? If I try to use floors.....
When I model them as three separate floors, and then Join them, it doesn't work. meaning that the layers within the floor don't match (well, they can't, in fact! I have to move the floor behind!)
If I model one single floor and then add split lines, and move them... it does work. BUT..... I have a stairs on top of it! the stairs have a different slope than the floor, and i need to build a variable layer that fills the void between the floor and the stairs.
So my hypothesis was: I put a sloped floor through the slope arrow... and then adjust one variable layer to do the inflill...
My dream would be to join then floor and stairs.... The material is the same
I am trying to create a sheet of floor plans that does not show the next floor down on each floor plan but I can't seem to find out how to do it. My lecturer said it made the floor plans 'confusing and difficult to read' but other than photoshopping them out or something I'm stuck See attachments for exactly what I mean. I have just installed revit achitecture 2014.
View 2 Replies View RelatedIm getting reflections on my walls when rendering. I want my walls to be clear white.
View 4 Replies View RelatedV Ray rendering i am using V Ray physical cam + V Ray sun once i rendering flooring colour is changing the walls colour actually i have white colour walls.
View 2 Replies View RelatedI'm making some graphics to be printed on a car. I have some lines with outer glow on them, but Illustrator won't render these unless I use 72DPI in raster effects reslution. I would like to go higher, but it won't give me anything. Guessing it's to heavy for Illustrator maybe? Is there anything I can do about this? I'm making my graphics in 1:1 scale, but I do it in a lower scale since it's just vector art anyway, however how would that effect my glow? Since it's a raster effect.
View 9 Replies View Related'm using a Mac with the latest version of the Creative Cloud. I've been stuck with the sillest problem ever with the Character Tool.It started with the size tool. If I set it to 200px and press enter, it will suddently jump to 11443.91 px. It does the same thing if I use the slider (clicking the tT and sliding up and down), it will show me the right number, but the second I let it go, it jumps to a complete random number. If I put it at 300 px, it goes to 11443.91px ... again.Now, all the other character tools are doing the exact same thing. The line-height, the tracking, everything.
Here's all my system info if you need it:
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Mac OS 10.8.4
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
[code]...
I think I'm pretty close to understanding how to get realistic interior lighting with nice soft shadows etc. However, I can't figure out how to get the sun & sky background to stop putting all these spots on my walls!
I previously made a version using 1000 "rays" for "Final Gather" and it looks a bit better....but it's still spotty.
How to get genuine soft shadows sans spots from the sun & sky background?
I've played with every parameter I can think of, but nothing smooths out the spots even a little bit.
AutoCAD MEP 2010 64 bit
Revit Architecture 2010
Windows 7
I am using AutoCAD Architecture 2012.
I built some walls and a roof slab using the wall, door, and roof slab tools in the build section of the ribbon. I drew a section plane and activated live section. The walls and roof did not cut away and they do not show up when i use the sectionplanetoblock command.
Is there a setting I need to change to make the walls and roof susceptible to being cut using the sectionplane command?