I have a model with multiple floors. When I am in Level 2, with Level 1 as an Underlay I can still edit walls and other objects from Level 1. I know there is a way to lock the Underlay, I just can't make it work. Pinning the entire Level 1 is not an options, because this is not View dependent.
View 7 RepliesWe just upgraded a project from 2012 to 2013. After upgrading, there are two floors which do not show up as cut in any sections (they displayed correctly in 2012). The two floors in question appear in the section, but not as cut elements (no cut pattern) and it is showing edges of the floor that should be well behind where the section is cut. One floor is 8" concrete and has been made to slope using the modify sub elements command. The other floor is a variable thickness floor modified in the same way to be the earth below the concrete floor since the topo is not nimble enough to follow the shape of the concrete floor.
I tried remodelling the floors. No luck.
I can model it in a separate file, cut sections in that file and have it display correctly. If I insert or paste that into the main model, it goes back to displaying incorrectly.
Our structural engineer had copied the lake floor into their model which is linked into ours, so I deleted the lake floors in the structural model, reloaded it and then remodeled the floors again. And it worked... in only one of the dozens of sections that show the lake floors! So that's one more than before...
In one of the attached images you can see the sloping lake floor and the earth floor below it as it should appear and in the other image you see them both in elevation rather than section. The 3d image shows the lake floor and the surrounding "earth floors". The center of the lake floor is 7'-0" below the outermost perimeter of the floor.
I'm new to Revit, and some how have set two floors to display as translucent - I've checked online, but have not found how to correct this.
Can somone tell me what I have done wrong - and how to fix it?
my teachers wants to know how to make multiple floors for a building.
View 2 Replies View RelatedI am doing some tests to export my model out to IFC. The slabs and walls do not line up. Revit 2012?
View 9 Replies View RelatedI'm just a novice when it comes to this program, a student in High school so I'm not very familiar with it.
Why is it that when I change one floor's surface (tile,carpet, ect.) and then make a seperate floor on the same floor but with a different surface, it changes BOTH floors like they are instances of each other?
How can I add a surface to individual floors on the same level? Ex. Carpet in living room, Tile in Bathroom.
My REVIT 2013 is crashing my PC when I click on 'Finish' after editing a floor. Whilst the file is only 38MB I have the horrible feeling that these fatal error happenings may be due to a system shortfall on my machine rather than a software malfunction. I have a Pentium 4 MicroATX M/B 3.0Ghz CPU with 4GB RAM, running on Windows 7 Professional (64bit).
View 9 Replies View RelatedMy floor structure has a finish layer of carpet that's a 1/2" thick. When I build this however, my doors and full height windows won't go down to the carpet, they'll go down to the sheathing and the carpet will cut in around it all. So how do I get my carpet to cut itself out of the way of my doors/ windows like it does with my walls? Take a look at the pic (sans walls) to see the carpet intersecting with my frames.
View 9 Replies View RelatedI assigned to each mass floor an usage, and my schedule functions well . That tool is wonderful, isn't it?
But I would want to display each usage in a different color, to show my client how I am organizing the building. Is this possible? Mass floors seems not to have a color or material property.
I have an issue with a label family made to represent the room dimensions. When inserted in a room with the floor without slope, the family works fine, but when inserted on a space with the floor modified for slope porpouse the family is not visible. Does the floor slope modify the visibility of the family? See the attached image, where the shower has the floor modified and the family is not visible.
View 1 Replies View RelatedI have a situation of one sloped floor connecting two horizontal floors. They build together a continuous surface.
I need to join them and have the layers be continuous along the structure. If they were roofs, no problem, I could use the "roof by extrusion" command.
Should I do that? If I try to use floors.....
When I model them as three separate floors, and then Join them, it doesn't work. meaning that the layers within the floor don't match (well, they can't, in fact! I have to move the floor behind!)
If I model one single floor and then add split lines, and move them... it does work. BUT..... I have a stairs on top of it! the stairs have a different slope than the floor, and i need to build a variable layer that fills the void between the floor and the stairs.
So my hypothesis was: I put a sloped floor through the slope arrow... and then adjust one variable layer to do the inflill...
My dream would be to join then floor and stairs.... The material is the same
I am trying to create a sheet of floor plans that does not show the next floor down on each floor plan but I can't seem to find out how to do it. My lecturer said it made the floor plans 'confusing and difficult to read' but other than photoshopping them out or something I'm stuck See attachments for exactly what I mean. I have just installed revit achitecture 2014.
View 2 Replies View RelatedWhat Revit 2012 setting makes walls and floors disappear when rendering is selected?
I have a Revit 8.1 project that renderes the model just fine. When I import it into Revit 2010 it also remders the model but I have to reassign the custom finishes. But when I upgrade it to 2012 and render - the walls and floors are suddenly missing!
See attachment.
I want to show a linked view from another proyect that has an underlay ceiling plan,I'm using By linked view option to show exactly the same view from the original project but the underlay RFP doesn't appear. I just want to show the outline of some skylight diffusers from the ceiling plan.
View 1 Replies View RelatedI've attached a couple images of a visibility problem I'm having. The ROOF image shows the underlay view I'm using in the NO ROOF view in my revit project. I modeled all four of the dormer roofs the same, in place roof components, and they show up in the roof plan, but not when I use the roof plan as an underlay for my framing plan.
They don't show up when I toggle on the hidden elements tool either. I checked to make sure I didn't have coarse scale visibility turned off as well as if I had not visible in plan unchecked. These things seem fine, plus, as you can see, it shows up in it's own view. View range seems to be fine too. I can't figure out why these elements don't show up.
In Civil3d 2012 when the Edit in Storm and Sanitary Analysis command is used to send a Civil3d pipe network and Catchment areas to SSA the program appears to open as expected with the "Create New Project" dialogue box displayed.
When the Create New Project prompt is accepted nothing is displayed in the SSA plan view.
But.... If I go to the SSA File pulldown menu the .spf project file is available and when it is selected a dialogue box is displayed indicating that the Background file(the dwg) file cannot be found and do we want to search for it "Yes/No".If No is selected the pipe network is displayed as expected.
If Yes is selected and the dwg file located and selected then the pipe network is displayed as expected but the background file looks like proxy objects.
Civil3d2012
Win7 64bit
NVidia Quadro2000M
I have trouble showing Underlay for level view when dealing with in-place walls. Basically, they dont work with Underlays - nothing shows up (even in wireframe mode).
Please have a look at attached file, dropbox link: [URL] ....
There is a Blend wall that starts on Ground level and goes as high as Top level. When you check whats visible on different levels (and RCPs) everything is fine (views respond to changing cut level and so on) - but when you try to Underlay one of the level views - nothing shows up. Basic idea is to show top edge for tracing with Linework tool - so it shows as Overhead.
I'm redoing some old projects in Revit, and I'm using a background image to vastly facilitate the process as the projects are almost perfectly drawn, I'd like however, to use a background image as reference and keep the underlay (e.g.: show the bg image for level 2 and over it show the level 1 underlay) but I couldn't find a way to do that.
View 2 Replies View RelatedThe underlay does not show up for Level 1 when I am on Level 2, but it does show up for Level 2 when I am on Level 1. the underlay option is on for Level 1, so I'm not sure why it's not showing up. I am using Revit 2014.
View 1 Replies View RelatedI'm supposed to model from scratch or find a pre-rigged model for some animation. I found a free rigged dog model for Maya [URL] .... that will fit my story perfectly, but I want to be able to change some of the geometry of the model, like modifying the ears and tail. But I can't seem to figure out how to do that! I'm able to select parts of the dog and move it around, but I don't know how to actually change the model itself. And if I do so, will it mess up the rigging? How do I go about editing this model?
View 4 Replies View RelatedI have a drawing and I want to enlarge the circle (circled red with MS Paint ) from round 6 to round 12.
But all things I've tried, it comes up with this:
I think it has something to do with the view I'm working in? How can I simply correct this.
I having used 3D modeling software and Auto-cad in the past, I know how to design complex models using the features provided in the tool-bars but I have never even heard about programming using things like VBA until randomly running into it on the internet.what exactly is the use of programming on software like auto-cad and solid-edge? I mean I understand it will change the part to a text file but what is the use? can you design/edit a 3D model using just programming? Do mechanical design engineers need to know this? (even if not I still want to learn but just need to know if it is compulsory) What is the latest/best programming language used for programming in design software because I heard VBA is slowing down.
View 8 Replies View RelatedApparently I can't edit model dimensions from a drawing because i did not select this option when i installed inventor 2010.
View 9 Replies View RelatedI would like to edit the faces of a model I imported into Maya, but I cannot find the face option when I right click. When I create a polygon however, it works just fine on it. Is there any way I can convert the model into a polygon?
Fully sized image in attachment.
Tried to do something that all other 3D softwares seem to have no problem with, even inventor at least when we were using the old versions.
Editting sketch - close sketch. No model update.
This is an existing 3D model created with inv2011. inv2013 does not like much of what we created in the old releases of inv.
Sketch gives me 1 dimension. Part and drawing give the old dimension value.
This is yet another major sign of unstable software. Over 24 software issues discovered from changing inv2011 to inv2013.
Is it possible to edit xrefs so that the xref layers correspond to your base model space layering? In other words, when you do an xref edit in your base drawing (not separate xref file) the layering will react to your edits using base plan layering? I use on screen layer tool bars and xref layers are on a separate layer and do not respond to these toolbar.
View 1 Replies View RelatedI already learned how to draw a plan of walls in autocad11 and make sure they have the desired height, so I can now draw a whole floor or story. But I do not know how to draw the one above it or under it.
View 2 Replies View RelatedHow to export a 3D model from Revit 2012 into 3D Max for rendering?
View 3 Replies View RelatedPattern Drawing you can change it to a Notepad file pattern to become a model.Where can I get more patterns to model or to get access.
View 1 Replies View RelatedI am working on AutoCAD 2013LT and I tried to use multiple viewports in model space which is a new thing to AutoCAD (i think). Anyway I wasn't using it on the last version.
Under View Tab when I go to choose different Viewport configurations sometimes some of the views change to isometric view. I don't know how to change it back to 2d view.
They mension something about viewport control lables which should be in top left corner, but I don't see those in my viweports.
I'm looking for a more realistic way of creating grout. Basically what I have is an underlying seamless texture with a 2px grid sitting on top (pillow emboss)...it's just not realistic enough though. I'd really like to find a way to add some jaggedness to it so the edges aren't so perfect. I've tried the distort/ripple filter, but that really didn't look good...it kept the corners sharp. I also thought the Custom Shape Tool may work if it was one long squiggled line tiled into a grid, but that won't necessarily look great either since the tile's corners won't be rounded.
I'm looking for a quick workflow if possible, as the tile size may vary (6x6, 8x8, 12x12, etc.).