AutoCAD Inventor :: 2013 / Model Will Not Update After Sketch Edit
Jul 15, 2013
Tried to do something that all other 3D softwares seem to have no problem with, even inventor at least when we were using the old versions.
Editting sketch - close sketch. No model update.
This is an existing 3D model created with inv2011. inv2013 does not like much of what we created in the old releases of inv.
Sketch gives me 1 dimension. Part and drawing give the old dimension value.
This is yet another major sign of unstable software. Over 24 software issues discovered from changing inv2011 to inv2013.
View 9 Replies
ADVERTISEMENT
Feb 27, 2012
I'm a new 2009 Inventor user (use mostly Solidworks for other jobs) and how to make the model update after I modify a feature sketch (e.g. I only add one more circle/hole to a sketch used for a somple extrusion, but the extra hole doesn't appear on the model). Tried all update-related commands but no luck so far. If I delete the feature and recreate it again everything works fine, but I stuff up all other features and mates that use the reference geometry...
View 2 Replies
View Related
Dec 14, 2012
want to change sketch 2013 into the sketch of 2010
View 1 Replies
View Related
May 29, 2012
I am having a problem with a sketch not updating the parameters when using a "while / end while" command.
Basically if you have a right angled triangle (as attached) with one side and the angle doing the driving then I wish to update the sketch until the last side which is a reference dimension reaches a preset dimension.
I cannot get the updated sketch to read back into the while command to stop when the limit is reached. Instead it goes on an infinite loop until the sketch breaks.
I have used every update under the sun and can get nothing to work.
Trigonometry not an option as this is a basic example of what I wish to achive.
I have seen an example of this working but only for reading the iproperties so dimensions can change until a volume is reached.
View 1 Replies
View Related
Jan 19, 2012
I have a function that adds many entities and constraints to a sketch, and it's very slow because it updates the sketch after each constraint is created.
Is it possible to turn off the automatic update, add all the entities and constraints, then turn on the update?
View 3 Replies
View Related
Mar 18, 2012
The attached part, created in Inventor 2012, has a formula for the number of occurances in a sketch pattern based on its length. When this number changes due to a length change, some parts of the sketch do not reposition and Inventor does not indicate that an update is required. The part can be fixed by dragging the affected geometry or performing a rebuild all. The following image shows the result when the length changes from 300 to 500.
View 6 Replies
View Related
May 3, 2013
Someone has generated a frame from an unconstrained skeleton (all green lines). I can edit the 3D sketch by double clicking it but the 3D sketch tab doesn't come up. I can drag a vertex but it gives me the error message "drag geometry composite request cannot be run on document"
There doesn't seem to be any way of dimensioning or constraining or otherwise editing this geometry.I have two of these frames to deal with.
View 2 Replies
View Related
Dec 20, 2011
I’m trying to get the embossed text on a nameplate (done in sketch on a part) to change with updating a custom property in iProperties. Right now I’m using iLogic so I can change the text in User Parameters and that updates the embossed text. So where I’m having an issue is the Export Parameters tab is grayed out so I can’t get it work with my custom properties.
View 1 Replies
View Related
Jan 7, 2013
If I create circle and then mirror that cicle in the sketch. How can I then edit that mirror?
When I create pattern in sketch I can edit pattern afterward but cant figure how to edit mirror (except deleting constrains).
Is there way to do it?
View 2 Replies
View Related
Nov 6, 2012
I am encountering issues with the "edit boundary" tab on the ribbon, as well as "finish sketch" when the edit boundary tab DOES show up. i don't know how to finish the sketch without this, so i have to undo everything.
View 1 Replies
View Related
Nov 29, 2013
I made a very simple "Junction" model which could generate different model per input.
My problem is: my model did not update before run "Save File" rule which made the saved model is not correct.
I have to use ilogic rule to save this model instead of "Save As" in Inventor menu.
"Junction" model which include some rules is included.
My current Version is:
Inventer Professional 2013 64-Bit Edition Build 200 release: 2013 SP2.
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
View 4 Replies
View Related
Mar 6, 2013
Is there a way to hide project geometry from model sketch? I am modeling a sheetmetal part where I need to sketch centermaks, part number etc. for laser cutting. I want to use xy planes for symmetry reasons when sketching, but I don't want them to appear in dxf. This is a problem if I create a dxf directly from the model.
Usually I create dxf files from drawing by adding new sheet where I create flat pattern view from the spesific part (excluding machinigs etc, only thermal cut boundaries visible). In the drawing I am allso able to show model sketches and hide unwanted project geometry. Is it possible to include these sketches to dxf?
View 1 Replies
View Related
Mar 20, 2013
How can I display a sketch or projected geometry that is not a closed loop in a ipt drawing? Historically I have to use a closed loop and emboss in order to display the geometry in a drawing.
Then move that forward to a DXF file for its intended use. I think there should be a way to just have lines placed on the model and display it on a drawing without it having to be a feature.
View 8 Replies
View Related
Apr 16, 2012
I can "Get Model Sketch" to make it appear visible in a drawing view. But I can find no way to use these "edges" or "lines" or "entities" or whatever they are, later in a drawing view sketch. No way to project them from Model Sketch to Drawing View sketch. I can attach leaders and dimensions to these Model Sketch entitites but I can find no way to use them in a sketch owned by the drawing view. Am I missing something?
IV2012 SP1
View 8 Replies
View Related
Aug 12, 2013
I have made a part - a motor that has four holes.
Now I'm trying to make another part, which will be aluminium plate that needs to have holes in exactly same points as the motor. My assembly containts both that parts.
What I'm trying to do is to reference in sketch a point that comes from different part (motor).
I could do it by hand, make it look that the holes are on top of each other but then there will be an error which doesn't seem professional.
In some tutorial on yt I have only found that using points one can reference the holes more easily, but it didn't show how.
View 1 Replies
View Related
Dec 9, 2011
Seen this recently? Using Inventor 2012 SP1 on Windows 7, 64 bit. If we go back into a previously created sketch and edit or add a dimension, upon clicking the green check mark to complete the dimension edit, the sketch exits back to the modelling environment, meaning we have to edit the sketch again to continue with other changes. Obviously no big deal if I'm only editing one dimension, but how often does that happen?
This started happening prior to SP1 being installed. We have this happening on multiple computers (all with the same hardware specs) in our office. I don't believe it to be a hardware or driver issue, but I am wondering if it is a process issue. For example, we use project geometry a lot, even projecting from other parts within an assembly (non-adaptively). We also work on SAT file models, rather than geometry initially created from Inventor itself.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
Autodesk Inventor Certified Professional
View 9 Replies
View Related
Mar 20, 2012
I created an assembly of parts and then converted my assembly to a weldment. I then realized that I need to create a sketch and make an edit to my assembly. The sketch command is greyed out however. I did some trouble shooting and realized that once I converted it, it no longer allows me to make edits. Is there anyway I can get around this? do I now have to re-create the entire assembly to make this edit at the assembly level? If so this would really suck since it is a rather large assembly. I see saving as a new IAM doesn't work as well.
View 5 Replies
View Related
Jan 27, 2012
I have had several sheet metal parts return error messages to edit the sketch coordinate system after the part has been modified. This usually pertains to a dimensioning drawing made to the flat pattern. I have found how to edit the coordinate system, but I don't know what to edit it to. If I select the center point I can drag it from where it sits to an existing corner and select done but that seldom resolves the issue. What is Inventor looking for? I sometimes get a message asking if I want to edit the axis as well but what to do there.
Why can't these sketches orient off the center point that is already in the model? If it would stay put I could dimension to it and be done but it has to twist and turn the model and then put the point on some corner, not usually where I would like it and then I get these errors if I alter the model later.
View 1 Replies
View Related
Mar 19, 2012
without going to edit sketch can i get dimensional values
View 3 Replies
View Related
Aug 8, 2013
Do you know how to constrain 2d cad sketch to match existing 3D model. see screenshot. Is it doable?
View 6 Replies
View Related
Sep 29, 2011
How would i insert the "variable name" of a custom iProp to a sketched symbol definition (in an idw)?
I can plonk the value of the iProp in no worries, but to make it "live" is a bit beyond me...
Sub WeldNote()On Error Resume NextDim oDoc As DrawingDocumentDim SketchedSym As SketchedSymbolDefinitionDim oNoteDef As SketchedSymbolDefinitionDim oDefSketch As SketchDim oTextbox As TextBoxDim SNewText As StringDim sNoteText As StringDim oReffedDoc As DocumentDim lReffedWeldType As Long'Err.ClearIf
[Code].....
View 9 Replies
View Related
Jan 9, 2013
Unable to find a way to show dual dimensions in my model shetch.
View 8 Replies
View Related
Jun 14, 2012
For some reason I get the prompt update thunder aside of my parts list in .idw tree that wont go away...
I edited one of the parts, updating its iproperties and since that it wont go away.
I tried opening each part, assembly and updating, saving it but it wont work...
How to force update?
View 3 Replies
View Related
Dec 19, 2013
"Path has discontinuous segments. Use Edit Sketch to change the path geometry"
View 5 Replies
View Related
Nov 16, 2012
I have a frame generator model that won't update without crashing. I made a small change to the geom and can't get the model to update without a crash. No error message. I have restored (no vault) yesterdays version without success. Same crash. I have edited the geom to it's pre problem state. Same crash.
View 2 Replies
View Related
Jun 14, 2011
When we insert a Revision Table to a drawing we have the option to update Revision Number property in the drawing. This property is updated whenever we add a Revision Row.
I want Inventor to update the Revision Number property in the model the same way.
If this is not possible, is there a way to automatically map the Revision Number property in the drawing to the Revision Number property in the model?
View 6 Replies
View Related
May 1, 2012
I am trying to edit a sketch in a multi body part file. While I am trying to edit, it displays all other solid bodies which is not required. How to switch them off displaying unnecessary solid bodies while editing a sketch?
View 6 Replies
View Related
Jun 6, 2012
If I zoom in on a small detail in a large sketch and then issue the "edit sketch" command Inventor changes the view to where the origin is visible on the screen. Is it possible to disable this?
View 2 Replies
View Related
Jul 1, 2011
I like to keep the properties of my drawing the same as those of my model. Currently I must remember to hit the "updat copied properties" button in the drawing to discard any old drawing properties and replace them with the properties from the model.
Is there any way to automate this task (perhaps on saving the drawing?) I presume an iLogic rule could be created in the drawing template, just not sure how to go about it.
View 7 Replies
View Related
Jun 11, 2013
I want to reset the number for the sketches, extrusions, etc. in the browser tree of my template file to start with 01 instead of sketch48 and extrusion69.
I also want to reset the model parameters to start with d0 instead of d485.
The attached image show an example of a simple cylinder that I created from my .ipt template file.
View 5 Replies
View Related
Feb 7, 2013
Im working on a plastic enclosure, I needed to make a hole for a connector but this hole would cut into both the top and bottom of the enclosure. Normally when I edit parts in an assembly I just double click them, they become transparent and I can do all my edits. Since I need to make a hole that cuts into both parts, I just went to the 3D Model tab started a new sketch and extruded out the cut.
However doing it this way does not reflect the changes when the parts are opened on their own. Is there a way to have these changes trickle down to the part files?
View 9 Replies
View Related
