For some reason I get the prompt update thunder aside of my parts list in .idw tree that wont go away...
I edited one of the parts, updating its iproperties and since that it wont go away.
I tried opening each part, assembly and updating, saving it but it wont work...
How to force update?
I'm looking to see if there is a way to link the revision number to a custom iProperty in the same part. Our laser requires a specific output for programming, but I only want this to show up on actual lasered parts as we don't need it on parts that are sawcut. Basically what I would like to do is create a custom iProperty that I can link to the title block for that reads RV:<Revision>. Is there a way to do this? I'd rather not create a separate drawing template for lasered parts as we've got about 100 templates for our various customers the way it is.
View 6 Replies View RelatedIm working on a plastic enclosure, I needed to make a hole for a connector but this hole would cut into both the top and bottom of the enclosure. Normally when I edit parts in an assembly I just double click them, they become transparent and I can do all my edits. Since I need to make a hole that cuts into both parts, I just went to the 3D Model tab started a new sketch and extruded out the cut.
However doing it this way does not reflect the changes when the parts are opened on their own. Is there a way to have these changes trickle down to the part files?
Tried to do something that all other 3D softwares seem to have no problem with, even inventor at least when we were using the old versions.
Editting sketch - close sketch. No model update.
This is an existing 3D model created with inv2011. inv2013 does not like much of what we created in the old releases of inv.
Sketch gives me 1 dimension. Part and drawing give the old dimension value.
This is yet another major sign of unstable software. Over 24 software issues discovered from changing inv2011 to inv2013.
I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies View RelatedI can't get Inventor 2013 show a custom iproperty correct.My iLogic rule is this:
iProperties.Value("Custom", "myvol")=volume = iProperties.Volume
But the custom iProperty is a Yes or No.Had no problem with this in Inventor 2011.
I have a drawing of a sheet metal part with multiple sheets. I have named each sheet to reflect the nature of the views (general dimensions, detail views, flat pattern, etc.). I want the name of the sheet to appear in the title block, but I cannot seem to find the "Sheet Name" property anywhere. Can it be added to the list of the drawing or sheet properties, or is there another way to achieve this?. I do not want to have to use Custom Properties, and manually re-enter the names of each sheet.
View 8 Replies View RelatedHow to export the drawing scale to a custom property, I can use in my title block? I would prefer that it updates when you save.
I use Inventor 2012 64bit.
I am trying to write a small standalone app in C# that I can run when I have an assembly document open. I want the app to iterate through all the parts in the assembly and set the iproperties. I am having some trouble accessing the iproperties however.
I want (for example) to set the "TITLE" in the "DOCUMENT SUMMARY INFORMATION" to be a concatenation of the part number and the description separated by a " - ".how to access these properties.
I would like to add a Custom iProperty to the BOM using API.
It would mimic the "Add custom iProperty columns" dialog.
I'm looking for a way to convert the iproperty value "volume" into length from known values in the part. I have an assembly which consists of 20 different typs of sheets which are rolled out in certain patterns. The width and depth of the sheet are known, and I would like to use the volume to find the length. The assembly is linked to an excel file so the values will change based on certain parameters. I'm using this as a check to make sure there is no error from the spreadsheet.
View 7 Replies View RelatedI wonder why my ipt iproperty is not transfer to the idw iproperty. Is there something I need to enable for the iproperty?
View 1 Replies View RelatedI'd like to build a rule into my standard part template that takes the part number (which it automatically gets from the file name by default), removes the characters after a delimiter, as well as the delimiter itself, and sets that as a new custom property. For example, we'll call the custom property Prop1
For part 123-321-1.ipt
Inventor already sets part number iProperty to 123-321-1
I want to set Prop1 to 123-321
For part 123-321-25.ipt
Inventor already sets part number iProperty to 123-321-25
I want to set Prop1 to 123-321
I've created a form to fill out with drop down options that link to a multitext parameter. I want to link this parameter to the keyword iproperty but a text parameter will not export.
AutoDesk Inventor 2012
My company manufacturs many sheet metal parts that ends up being painted.We need to describe both material and surface treatment in the title blocks on our idw's. Inventor parts then have a selected material (the required steel type) and a color override is applied (the required paint job) But color override is not just like that to retrieve for the title block, like standard iproperties like
<MATERIAL> or <THICKNESS>
I know how to get a parameter into my list of custom iProperties.What I want to do is take the iProperty lbmass and add it to the list of user parameters. Is there any way to do this without using iLogic?
View 8 Replies View RelatedI am trying to change the iProperties "Physical" "Material" using an Inventor VBA macro..For example, say the material is set to "DEFAULT" and I want to change it to "TITANUIM", how can I do this using VBA?
View 1 Replies View RelatedI have a template part that I would like to save automatically once the parameters dialog box is closed. I would also like the Save As filename to automatically be filled in with a iProperty named "Part Name". I already have the "Part Name" description grabbing information from parameters. Is this possible? And is the best way to trigger the event after an "iProperty change" or "Any Model Parameter Change"?
View 1 Replies View RelatedI put this url in iproperty: catalog web link: google.it in a part
Then I published the DWF.
I supposed than I push ctrl - click catalog web link: google.it in design review properties table the browser pop up but nothing happend.
My idea is fill this iproperty of any part that need maintenance with the url of manufacturer. So the customer can directly download the manuals.
Am working on iProperties and i am trying to find the iProperty Location. I tried
-Inventor User Defined Properties
-Inventor Summary Information
-Design Tracking Property
But i am unable to find the Location iProperty.. how to find this location.
is there way to refresh sheet of drawing when an iProperty is changed trough API? When I change for example revision Number, the sheet still show old number. The value is changed, because if I open the iProperty dialog, there is new value and also when iProperty dialog is close then the sheet (title block with this property) is immediately correctly updated. I know that I can use ActiveSheet.Update method, but this update whole sheet and it take long time. There nust be something better because dialog iProperty doesnot update whole sheet and it is vvery quick.
Dim oISI As Inventor.PropertySetDim oDrw As Inventor.DrawingDocumentSet oDrw = ThisApplication.ActiveDocumentSet oISI = oDrw.PropertySets.Item("Inventor Summary Information")oISI.Item("Revision Number").Value = "test"oDrw.ActiveSheet.Update ' I would like to replace this line, this take long time
[URL]
I am trying to find an ilogic for part proparty entry as soon as I create new part/assy.
I know it is possible by Event triger-> New Document .
I am migrating our old Inventor data to our new system. I will do an ilogic script for that.
I know how to add custom iProperties with iLogic but how can I remove them? Is it possible with iLogic? I would like to clean out all old iProperties that we don't need anymore.
I am trying to use the iProperties.Value("part1", "Summary", "iProperty") function to get the filename or complete filepath of a component within a subassembly. I know that these iProperties exist because I can insert them onto a drawing, and I see them in the general tab of the iProperty window.
However, when I try something like:
filename = iProperties.Value("part1", "General", "Filename")
I get an error message indicating that the General tab can't be found. How might I go about getting this filename iProperty, or is there an easier way?
How to set multi parameter, iproperty using ilogic (or smth else)?
I hav eparameters: d1=50, d2=100, d3=5. I need to set a new multi parameter/iproperty that the final value is:
Angle 50x100x5 (suppousedly code should contain smth like: "Angle", "d1", "x", "d2", "x", "d3") but I do not know exactly...
I am trying to add a custom iProperty from my assembly to the drawing parts list. According to the help wiki, I'm supposed to click Column Chooser > New Property > Custom Properties List (click here to see the relevant wiki page--also see the attached screenshot called Custom Property Help.png).
When I click on new property, there is nothing about Custom Properties List.
I am simply trying to traverse an assembly, check each component for existance (or value of) an iProperty, and if so add that components name to a list. Here is what I have, but it doesnt work.
'Define the open document
Dim oDoc As Document = ThisDoc.Document
Dim oRefDoc As Document
[Code].....
I want to create an iproperty that has a pull down menu where I can make a selection. Can this be done? Can I import this data from a txt, csv, xml file?
View 3 Replies View RelatedHow to create a list of values to chose from for an iProperty? I can create a multi-value parameter and set the iproperty equal to it, then create a form that calls up the parameter...but there has to be a better way. I'd like to create a template with iProperties that are standardized. For example, we have a bunch of labs in our business. I created a custom iproperty for the labs (so that this property could be searched in vault). However, if I stop there, users will find all sorts of ways to botch the lab names. Therefore, when you run a search for a lab, you may not find all the files associated with that lab due to a mispelling. Forcing values chosen from the iProperty list would prevent this from happening.
I was hoping there would be a way to do this with iLogic forms, but you can't create a list for iProperties...at least I don't think you can.
Autodesk Product Design Suite 2012 (Inventor 2012 Pro SP1, Vault 2012 Pro Update 1)
Windows 7, 64-bit
Intel Core i7
8GB
Nvidia Quadro FX 3800M
how to change an "IPT" files iProperty "Material" with a VBA macro?
For example,
If I have created a part (ipt) file, the iProperties "material" is set to "Default"
How can I change the material to say...."GOLD" (Example Only!!!) using a AutoDesk Inventor VBA macro?
Say you model a custom nut or bolt with threads. Is it possible to put the thread designation in the description iproperty?
Something like:
=bolt, hex head, <dia> - <thread designation>