I have a template part that I would like to save automatically once the parameters dialog box is closed. I would also like the Save As filename to automatically be filled in with a iProperty named "Part Name". I already have the "Part Name" description grabbing information from parameters. Is this possible? And is the best way to trigger the event after an "iProperty change" or "Any Model Parameter Change"?
View 1 RepliesI know how to get a parameter into my list of custom iProperties.What I want to do is take the iProperty lbmass and add it to the list of user parameters. Is there any way to do this without using iLogic?
View 8 Replies View RelatedI am trying to find an ilogic for part proparty entry as soon as I create new part/assy.
I know it is possible by Event triger-> New Document .
I am migrating our old Inventor data to our new system. I will do an ilogic script for that.
I know how to add custom iProperties with iLogic but how can I remove them? Is it possible with iLogic? I would like to clean out all old iProperties that we don't need anymore.
I am trying to use the iProperties.Value("part1", "Summary", "iProperty") function to get the filename or complete filepath of a component within a subassembly. I know that these iProperties exist because I can insert them onto a drawing, and I see them in the general tab of the iProperty window.
However, when I try something like:
filename = iProperties.Value("part1", "General", "Filename")
I get an error message indicating that the General tab can't be found. How might I go about getting this filename iProperty, or is there an easier way?
How to set multi parameter, iproperty using ilogic (or smth else)?
I hav eparameters: d1=50, d2=100, d3=5. I need to set a new multi parameter/iproperty that the final value is:
Angle 50x100x5 (suppousedly code should contain smth like: "Angle", "d1", "x", "d2", "x", "d3") but I do not know exactly...
I want to use Ilogic to construct a code part name.
My question is perform a code of about 12 characters. For example the parameter "Lenght" is 600mm but in the expressione result It must be "000000000600" (a string of 12 characters)
I've been using iLogic. I'm creating a template assembly that will be used for multiple jobs. Therefore, the job number will be changing. I want a custom iProperty in ALL parts and sub-assemblies (cleverly call it "Job #" maybe) that I can include an a separate property called "Drawing #" which whose value will be [some text]-<Job #>-[some more text]. I want to be able to update all the "some text" parts manually for each component, but I want the Job # to update automatically. I need this property because I have a column in all my Parts Lists called "Drawing #" which tells the drawing number for any given part or assembly.
Ultimately what I want to do is open a text or Excel file, enter the job number, open my Inventor drawing, and have every Drawing # entry in every parts list magically update to the correct job number.
I've managed to use iLogic to do just that with a single .ipt/.iam file. But I have dozens upon dozens of components in the main assembly. I'd like to run some rule or hit some button or do something that will cause the Job # property to update for ALL sub-assemblies and parts, so that all my parts lists reflect the change.
I am struggling to find the right ilogic to extract the state of a multi-value text parameter and use it to populate a single i property.
View 1 Replies View RelatedI am after writing part of rule for ilogic,i need the rule to fill out a custom property with information for me. I have a part that has 2 parameters
parameter 1 = Frontplanangleparameter 2 = Endplanangle
Custom property
iProperties.Value("Custom", "DESC2") =
I need the rule to examine both parameters and if both angles = 0 then DESC2 = ""And if any parameter >0 then
iProperties.Value("Custom", "DESC2") = bevel
Is it possible to add the iproperty summary, comments to a ilogic form?? Can't find it in the list..
Autodesk Product Design Suite Ulitmate 2012 Sp1 / Vault Collaboration 2012 Sp1
HP EliteBook 8560w
Intel(R)Core(TM) i7 CPU Q 720 @ 2,0GHz 2,0GHz
16GB RAM
Windows 7 X64 SP1
I found this code to create a custom iProperty in the current, open document:
Dim propertyName As String = "MyProperty"Dim propertyValue as String = "Test Value"customPropertySet = ThisDoc.Document.PropertySets.Item("Inventor User Defined Properties")Try prop = customPropertySet.Item(propertyName)Catch ' Assume error means not found customPropertySet.Add("", propertyName)End TryiProperties.Value("Custom", propertyName) = propertyValue
I have a iLogic rule that goes through each component of an assembly, counts how many times it occurs in the assembly, and then assigns that value to an iProparty (i.e. it inserts the total quantity of the part in some iProperty). Currently, however, it assigns the value to a default iProperty value, "Authority". I'd like, instead, for it to assign it to a custom iProperty called "Total QTY". However, I don't know how to tell Inventor to do the above code for a component in the assembly rather than the assembly itself. Below is my entire code. I've labeled where I'm guessing the above code should go. How I'd modify the above code to create the iProperty in the component being processed by the rule at that point?
Current
''True comment: Begin '''Commented-out Begin '''PartDocumentObject = 12290''AssemblyDocumentObject = 12291Dim openDoc As DocumentopenDoc = ThisDoc.DocumentDim docFile As DocumentIf openDoc.DocumentType = 12291 Then''If the open document is an assembly:''For each document referenced in this document:For
[code]......
I had wanted to find a way to engrave/emboss the part number on a part model and have it be parametrically tied to the part number iProperty. Since it doesn't appear that I can create a text box and insert the iProperty directly, here's what I did to work around this. (I setup my part templates to have this out of the box....)
1. Within, the IPT file, add a user text parameter called "PartNo" and set its initial value to any text value.
2. Create your sketch for your text to be engraved. Insert the User parameter you just created.
3. Create the engraving/embossing for your text.
4. Create the following iLogic rule:
' Requires a User Text Parameter called "PartNo" prior to running' Set the appropriate event trigger to tasteIf Parameter("PartNo") <> iProperties.Value("Project", "Part Number") ThenParameter("PartNo") = iProperties.Value("Project", "Part Number")InventorVb.DocumentUpdate()End If
5. I set this rule to fire using the "iProperty Change" event trigger. So if the iProperty is set or changed, your text will update. Obviously, you can set this to run with whatever trigger you like.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
I want to have a Blank size custom iproperty using flat extents length and width this is what i did but gives error is there a way to get this to work the way I want it to? I dont want a Length and width to be seperated would like it all in one.
iProperties.Value("Custom", "BLANK SIZE")=Round(SheetMetal.FlatExtentsLength, 3)"X"=Round(SheetMetal.FlatExtentsWidth, 3)
I'm looking to see if there is a way to link the revision number to a custom iProperty in the same part. Our laser requires a specific output for programming, but I only want this to show up on actual lasered parts as we don't need it on parts that are sawcut. Basically what I would like to do is create a custom iProperty that I can link to the title block for that reads RV:<Revision>. Is there a way to do this? I'd rather not create a separate drawing template for lasered parts as we've got about 100 templates for our various customers the way it is.
View 6 Replies View RelatedIs there a way in an inventor drawing rule to do a "save as" which saves the drawing as an Inventor dwg file rather than an AutoCAD dwg file?
The below saves as AutoCAD which is ok but I need the outputted drawing to be linked to the model. I don't want the code to save the entire assembly as this is done further down the line. I also don't want to save the current inventor dwg drawing from which the rule is run as this is just a template drawing.
ThisDoc.Document.SaveAs(ThisDoc.Path&"2D_DRAWINGS"&iProperties.Value("Custom", "Drawing No.")&" (Rev "&Parameter("BEAUFORT_ARRANGEMENT_3.iam.DRAWING_REVISION_NO")&")"&".DWG", True)
I'm currently using this rule for easy PDF making
SaveLoc = "C:Temp"FileName = ThisDoc.FileName(False)Revnr = " rev_" & iProperties.Value("Project", "Revision Number")PDFnaam = SaveLoc & FileName & RevnrThisDoc.Document.SaveAs(PDFnaam & (".pdf") , True)MessageBox.Show("PDF is aangemaakt in C:Temp", "Document creation",MessageBoxButtons.OK,MessageBoxIcon.Information)
The problem with this is that i want to save without lineweight? is there anyway to do this with this code?
I want a part automatically to be "saved as" in my workspace.
there is the command
ThisDoc.Document.SaveAs(NewFileNameAndExtension , True)
in the browser of iLogic but I don't know how to use it.
I tried ThisDoc.Document.SaveAs("partname.iam", True)
but that's couases a error.
I would like to use iLogic to do a File Save As and have the dialog box open in a specified folder. I have tried the code below but it doesn't work.
oFileDlg.InitialDirectory = "J:" & strFolder & (".dwg")
oFileDlg.ShowSave()
I am having a bit of trouble finding the correct code for some automated ilogic in inventor 2011.
I am trying to achieve an automated rename and save process for an assembly file as well as the variable parts in the file.an example would be a steel column...
Open ilogic steel column, run rules to change column length and section size...then save a copy to workspace, but also to a specific folder in the workspace..also rename the column file and save.
i have this for file saving -
SyntaxEditor Code Snippet
Test=InputBox("Add File name", "Please Add your file name", "Prefix number - File - .iam")
ThisDoc.Document.SaveAs(ThisDoc.WorkspacePath()&Test, True)
Which works fine to save the new assembly, but i need the same for the variable column within the assembly, and also to save to a specific folder not just the workspace top level.
I'm trying find some code that will allow me to save a PDF in 2 different locations.
I want to save a copy on my C: drive - this part has been done, but I'd like the code expanded to save a copy on the F: drive (under a similar path to that on the C: drive.
For example, for drawing XXX-XXX.dwg (C:Vault WorkspaceCADSalesEnquiries201313-XXXDrawings), I would like a PDF created in C:Vault WorkspaceCADSalesEnquiries201313-XXXDrawingsPDF (this part has been done) and i would also like a copy saved in F:SalesEnquiries201313-XXXDrawingsPDF.
I do not know which will be easier; to create 2 PDFs, or create 1 and copy it to F:
I currently have ilogic code that automatically saves a template Inventor dawing as a job drawing. However the problem I am having is when it does this save it takes forever as it seems to be also saving the linked model also. Is there a way to save this Inventor dwg without saving the linked model? The reason why I do not want this model save is because after the drawing is outputted the user is given options to write part numbers and dxf files if required which requires a model save anyway.
Sample of code used:-
ThisDoc.Document.SaveAsInventorDWG(ThisDoc.Path & "2D_DRAWINGS (Inventor dwg)" & iProperties.Value("Custom", "Drawing No.") & ".DWG", True)
I have the following
strFile = ThisDoc.FileName(False) & "-Rev " & iProperties.Value("Project", "Revision Number")ThisDoc.Document.SaveAs(strFile & (".dwg"), True)ThisDoc.Document.SaveAs(strFile & (".pdf"), True)
And it works like a charm for pdf, but it does not export to .dwg?
And also, is it possible to decide where in the name the "-Rev " &iPro....should appear?
Ex. if the filename should be : "12345 - Rev 02 - Section cut"
I seem to have my task accomplished, but Inventor crahes on me after it is done.
Here is how my iLogic works.
' Deleting the suppressed parts from the assembly
Dim compDef as AssemblyComponentDefinition
compDef = ThisDoc.ComponentDefinition
Dim compOcc as ComponentDefinition
For Each compOcc in compDef
[Code] ........
Now as soon as the last line is executed, Inventor crashes.
But when I go to the save file part (C:MyPath), both the parts and assembly files are saved and if I open it, they work just fine.
I just can't get inventor to stop crashing.
My question: We want to use iLogic to save a PDF-file of the DWG-drawing every time we hit "save". We now use the following iLogic
Spoiler (Highlight to read)oPath = ThisDoc.Path PN = iProperties.Value("Project", "Part Number")
PDFAddIn = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}")
oDocument = ThisApplication.ActiveDocument
oContext = ThisApplication.TransientObjects.CreateTranslationContext
[Code] .....
I am making some iLogic automated parts which I want to save when I place them in an assembly.
Now I have the folder the file needs to be saved in allready specified in the simple code I wrote but I want to be able to browse the folders to select a specific one.
I run the code by activating it in a Form that pops up when you place the part in an assembly.
The simple save as code I wrote is as following:
Workspace = ThisDoc.WorkspacePath()If System.IO.File.Exists(Workspace & "Parts" & "Cable Tray-" & Partnumber & ".ipt") = True Theni = MessageBox.Show("The partnumber you chose is allready in use, choose an other number.", "Save Error", MessageBoxButtons.OK, MessageBoxIcon.Hand, MessageBoxDefaultButton.Button1)Else If System.IO.File.Exists(Workspace & "Parts" & "Cable Tray-" & Partnumber & ".ipt") = False ThenThisDoc.Document.SaveAs(Workspace & "Parts" & "Cable Tray-" & Partnumber & ".ipt", False)End If
How I can browse the folders to select the folder to save the part in when placing the part?
I´m trying to create an external iLogic rule that let´s the user specify a path and saves an assembly and all it´s components into one directory. Alternatively it could be the main workspace path which doesn´t have to be specified by the user so it can be handled internally.
The background is a design template that resides on a network storage which can be configured through an iLogic Form and when the user is done configuring the assembly to it´s liking it should be saved to it´s workspace.
I was looking through the snippets but couldn´t find anything related to "save all". I have the feeling that I have to cycle through all component occurences and save them one by one.
Getting a Save As dialog box seems to be possible as I could see on Curtis Waguespack´s blog but the commands he is using are nowhere documented. For example for calling the dialog box he is using
InventorVb.Application.CreateFileDialog(oFileDlg)
I have an ilogic rule to open an existing excel file template and export the inventor parameters into it. I am trying to find a way to then save the excel file as a different filename. This way the original template can stay unmodified. I have found the GoExcel.save command but is there some sort of GoExcel.saveas(filename, filepath) command?
View 2 Replies View RelatedI am not good with iLogic but I have this rule that gives me length and width of a sheetmetal part in mm and with , (comma). The rule works but the file will always accept saving regardless if there has been changes or not. I want the rule to only accept save IF there has been changes on SM_Length (=<FLAT PATTERN LENGTH> cm) and SM_Width (=<FLAT PATTERN WIDTH> cm) or Thickness.
sLength = iProperties.Value("Custom", "SM_Length")
sWidth = iProperties.Value("Custom", "SM_Width")
sThickness = iProperties.Value("Custom", "Thickness")
[code]....
Autodesk Inventor/Vault Professional 2013
I have an assembly that I am working on that will be used as a configurator, driven by I-logic. Everything is work fine but there is one part off the assembly that will be custom to each new assembly. Is there a way to use I logic to open the ipt file save it as copy with different name and replace the original in the assembly. I know this can be done manual through the productivity tab within the assembly environment, but I am trying to automate the process so the end user will just have to follow prompts that will be given by i-logic.
View 4 Replies View RelatedWe have a word file that we use a lot for our drawings. There is an empty file that we open and then save the file into the same directory as the drawing.
I am trying to setup some code that will open the empty Word File, and then bring up the Word Save As dialog box with the correct directory and file name already completed. The correct directory and File name will be determined by the Drawing Code.
I have been able to open the Empty Word Document from iLogic with the following
'CRS Template Path & File NameoCRSTemplate = "\WWSERVERDisplaysA-Z Stand PartsCRS-Template.doc" 'Publish document. ThisDoc.Launch(oCRSTemplate)
I have been able to Open the Empty Word File from VBA and then bring up the Word Save As Dialog Box but I cannot work out how to define the initial directory or the initial file name from Inventor.
This is the VBA Code I have been using top open the Empty Word File and Show the Word Save As Dialog Box:
Public Sub OpenCRSDoc1()
'Don't Forget to Add the Word Object Library in the Tools - References
' Call SetCRSDetails
[Code].....
If you try to use the With Command for the FilePicker it will just open the Word Document and NOT the Save As Dialog Box!!!
Example of the With Tried
With FilePicker
.InitialDirectory = "Z:"
.DialogTitle = "Hello"
.Show
End With
How to open a Word Document from either iLogic or VBA (VBA Preferred) and then open the Word Save As Dilog Box and define the Initial Directory and Filename?