I am after writing part of rule for ilogic,i need the rule to fill out a custom property with information for me. I have a part that has 2 parameters
parameter 1 = Frontplanangleparameter 2 = Endplanangle
Custom property
iProperties.Value("Custom", "DESC2") =
I need the rule to examine both parameters and if both angles = 0 then DESC2 = ""And if any parameter >0 then
iProperties.Value("Custom", "DESC2") = bevel
I've been using iLogic. I'm creating a template assembly that will be used for multiple jobs. Therefore, the job number will be changing. I want a custom iProperty in ALL parts and sub-assemblies (cleverly call it "Job #" maybe) that I can include an a separate property called "Drawing #" which whose value will be [some text]-<Job #>-[some more text]. I want to be able to update all the "some text" parts manually for each component, but I want the Job # to update automatically. I need this property because I have a column in all my Parts Lists called "Drawing #" which tells the drawing number for any given part or assembly.
Ultimately what I want to do is open a text or Excel file, enter the job number, open my Inventor drawing, and have every Drawing # entry in every parts list magically update to the correct job number.
I've managed to use iLogic to do just that with a single .ipt/.iam file. But I have dozens upon dozens of components in the main assembly. I'd like to run some rule or hit some button or do something that will cause the Job # property to update for ALL sub-assemblies and parts, so that all my parts lists reflect the change.
I am migrating our old Inventor data to our new system. I will do an ilogic script for that.
I know how to add custom iProperties with iLogic but how can I remove them? Is it possible with iLogic? I would like to clean out all old iProperties that we don't need anymore.
I found this code to create a custom iProperty in the current, open document:
Dim propertyName As String = "MyProperty"Dim propertyValue as String = "Test Value"customPropertySet = ThisDoc.Document.PropertySets.Item("Inventor User Defined Properties")Try prop = customPropertySet.Item(propertyName)Catch ' Assume error means not found customPropertySet.Add("", propertyName)End TryiProperties.Value("Custom", propertyName) = propertyValue
I have a iLogic rule that goes through each component of an assembly, counts how many times it occurs in the assembly, and then assigns that value to an iProparty (i.e. it inserts the total quantity of the part in some iProperty). Currently, however, it assigns the value to a default iProperty value, "Authority". I'd like, instead, for it to assign it to a custom iProperty called "Total QTY". However, I don't know how to tell Inventor to do the above code for a component in the assembly rather than the assembly itself. Below is my entire code. I've labeled where I'm guessing the above code should go. How I'd modify the above code to create the iProperty in the component being processed by the rule at that point?
Current
''True comment: Begin '''Commented-out Begin '''PartDocumentObject = 12290''AssemblyDocumentObject = 12291Dim openDoc As DocumentopenDoc = ThisDoc.DocumentDim docFile As DocumentIf openDoc.DocumentType = 12291 Then''If the open document is an assembly:''For each document referenced in this document:For
[code]......
I want to have a Blank size custom iproperty using flat extents length and width this is what i did but gives error is there a way to get this to work the way I want it to? I dont want a Length and width to be seperated would like it all in one.
iProperties.Value("Custom", "BLANK SIZE")=Round(SheetMetal.FlatExtentsLength, 3)"X"=Round(SheetMetal.FlatExtentsWidth, 3)
I'm looking to see if there is a way to link the revision number to a custom iProperty in the same part. Our laser requires a specific output for programming, but I only want this to show up on actual lasered parts as we don't need it on parts that are sawcut. Basically what I would like to do is create a custom iProperty that I can link to the title block for that reads RV:<Revision>. Is there a way to do this? I'd rather not create a separate drawing template for lasered parts as we've got about 100 templates for our various customers the way it is.
View 6 Replies View RelatedI am after a rule to change the unit type of all .ipts from cm to mm.
This has to go down to all levels in hierarchy but only change .ipt files
I can't for some reason get this rule to work, simply want to be able to choose what title block to use.
I created a text parameter with the multi-values: TES ELE and TES EQU
I have 2 title blocks in my template called TES ELE and TES EQU
Here is my code, basically, I want to rule to apply the title block based on the selection, which will be done on a form.
If Title = "TES ELE" ThenActiveSheet.TitleBlock = "TES ELE"ElseIf Title = "TES EQU" ThenActiveSheet.TitleBlock = "TES EQU"End IfInventorVb.DocumentUpdate()ThisApplication.ActiveView.Fit
I have found many threads in this forum and have used their solutions for this rule, but for some reason, my rule will not select the title block and place it in the drawing.
Here is a snap of my set-up and my template file is attached
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
My company has recently switched from the H drive to the G drive. This has resulted in a lot of old files still referring to the H drive where the External Ilogic rules used to be. I'm wondering if there's any automatic way to change that? Uploading a pic showing the event triggers as they are now.
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM
I create a thread here: and I have most of what I require, but for some reason I can't iLogic to swap my title blocks within my drawing template.
View 3 Replies View RelatedI am trying to piece together some code for an ilogic rule. This rule should look for a drawing view that is a flat pattern, if it finds one it should change the object layer to our "CNC" layer.
View 3 Replies View RelatedI need an ilogic rule to autmoatically change the style of the parts list in a drawing file.The parts list style already exist in the drawing.
View 2 Replies View RelatedWithin an IDW file, you can go to the Styles Editor, then click on a standard. On the General tab, there's a drop down for the unit of length.
Provide the code so that I can change this setting from Inches to mm with an iLogic rule?
I want to be able to have All Work Planes set as 'Invisible' but create a Message.box or Icon that allows me to change the Visibility of any individual workplane(s) physically selected in the browser.
A rule written by another member should do the trick if the following line could be altered so as not to read 'For Each' oWorkPlane but instead for 'Each Selected' oWorkplane.
'For Each oWorkPlane In docFile.ComponentDefinition.WorkPlanes'
'get user input
oInput = InputRadioBox("Select workplane visibility:", _
"Turn ON workplanes for all components", "Turn OFF workplanes for all components", "False", "iLogic")
'Define the open document (top level assembly)
Dim openDoc As Document
openDoc = ThisDoc.Document
[code]....
I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
View 8 Replies View RelatedIs there a way to invoke the iLogic Rule Editor and pass it an existing rule name or external rule for editing?
View 4 Replies View RelatedI need a way to run a rule which is saved in my top-level assembly using iLogic rule which is saved in a part file in the parent assembly.
I have even tried using an external rule in a txt file, but that gives the error "Component: This function can only be used in an assembly." - which makes no sense to me. I hope I am just missing something simple. I cant believe with all its other strengths, that iLogic would be so limited in that regard. Why is there not simply a snippet under the 'Run Other' that allows you to specify an assembly file and the rule name? (like there is for running a rule in a component from the assembly)
I want to simply set a custom iproperty as the Description in each part file within my assembly. I can do this easily at part level with ilogic but I want to be able to run the rule from the assembly level and all the parts run the rule. I am struggling to find a way to do this.
I think this may be the best method I have found but I think it must be far easier?
[URL].......
I am working for customer with a simple item with his iLogic design. He has created a simple form to modify his iProperties. To modify the current material, a multi-value parameter was created and the following rule as a local rule;
"MultiValue.List("MATLIST") = iProperties.Materials
iProperties.Material = MATLIST"
He is now trying to make this an external rule but gets the following error
Error in rule: Mat2, in document: Mat2.iLogicVb
iProperties.Material: is probably a bad material name.
The more info tab says:
System.ArgumentException: iProperties.Material: is probably a bad material name.
at iLogic.CadPropertiesInRule.SetDocMaterial(Document doc, String matName)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?
View 5 Replies View Related<Subassembly document name>” = iProperties.Value("Custom", "CUSTOMER P.O. NUMBER") iProperties.ValueInDoc("<Subassembly document name>.iam", "Custom", "CUSTOMER P.O. NUMBER")= Ucase(InputBox("CUSTOMER P.O. NUMBER?", "Create Customer P.O.#", iProperties.Value("Custom", "CUSTOMER P.O. NUMBER")))
View 3 Replies View RelatedI know how to get a parameter into my list of custom iProperties.What I want to do is take the iProperty lbmass and add it to the list of user parameters. Is there any way to do this without using iLogic?
View 8 Replies View RelatedI have a template part that I would like to save automatically once the parameters dialog box is closed. I would also like the Save As filename to automatically be filled in with a iProperty named "Part Name". I already have the "Part Name" description grabbing information from parameters. Is this possible? And is the best way to trigger the event after an "iProperty change" or "Any Model Parameter Change"?
View 1 Replies View RelatedI'm looking for a way to change the size of a custom content center part via ilogic. I found a way to replace them on this forum but this is not ideal for, because that creates a new part every time i change the size of the part.
View 2 Replies View RelatedI am trying to find an ilogic for part proparty entry as soon as I create new part/assy.
I know it is possible by Event triger-> New Document .
I am trying to use the iProperties.Value("part1", "Summary", "iProperty") function to get the filename or complete filepath of a component within a subassembly. I know that these iProperties exist because I can insert them onto a drawing, and I see them in the general tab of the iProperty window.
However, when I try something like:
filename = iProperties.Value("part1", "General", "Filename")
I get an error message indicating that the General tab can't be found. How might I go about getting this filename iProperty, or is there an easier way?
How to set multi parameter, iproperty using ilogic (or smth else)?
I hav eparameters: d1=50, d2=100, d3=5. I need to set a new multi parameter/iproperty that the final value is:
Angle 50x100x5 (suppousedly code should contain smth like: "Angle", "d1", "x", "d2", "x", "d3") but I do not know exactly...
I would like to add a Custom iProperty to the BOM using API.
It would mimic the "Add custom iProperty columns" dialog.
I want to change 'mutil value select" to "custom value input" in ilogic user parameters. something like this:
if condition A then
multivalue.setlist("length", 1,2,3,4,5)
else
(users can enter any value they want, how can i remove the list first and set it to custom value input?)
I want to use Ilogic to construct a code part name.
My question is perform a code of about 12 characters. For example the parameter "Lenght" is 600mm but in the expressione result It must be "000000000600" (a string of 12 characters)