Within an IDW file, you can go to the Styles Editor, then click on a standard. On the General tab, there's a drop down for the unit of length.
Provide the code so that I can change this setting from Inches to mm with an iLogic rule?
I am after a rule to change the unit type of all .ipts from cm to mm.
This has to go down to all levels in hierarchy but only change .ipt files
I am trying to have one drawing with B size and E size sheets I am trying to get the border, title block and standard to change when the sheet format changes. I can get it to work when I run the rule but have hard time find information to just change when sheet format changes. And I can't find anything or I should say a sample of how to. I think I found the code just don't know how to make it work. Here is what I have so far.
SubMain()
IfActiveSheet.Size="E"Then
ActiveSheet.TitleBlock="G&T (E)"
ActiveSheet.Border="G&T Border (E)"
EndIf
IfActiveSheet.Size="B"Then
[code].......
I would like a few rules to be triggered once the new drawing template is opened.select sheet size, I have been given a rule that already works, basically the rule selects a border and title block based on sheet size selection.
trigger = iTrigger0iLogicForm.Show("BorderChange", FormMode.Modal)iLogicVb.UpdateWhenDone = TrueIf Parameter("BorderSize") = "A0" Then ActiveSheet.ChangeSize("A0", MoveBorderItems := True)ActiveSheet.TitleBlock = "MJTD A0"ActiveSheet.Border = "MJTD A0.
[code]....
I would also like a rule to let me annotate in metric or imperial. this is where I require assistance. I am not sure the best way to achieve this rule. My programming is very basic.I have found some links here, but I can't seem to make them work in the drawing environment. Also these rules seems to change the units of an already created .ipt.
Rule #1 Link
Rule #2 Link
I am just looking for a rule to select either .in or mm from the styles library(i think) , before I even place a base view. Regardless of the original units used to make the model.
Changes all dimensions, balloons, ect (define more if you want) to current object default in active standard.
Sub ChangeDimStyle()'J.Kriek 2012 Dim oApp As Application Dim oIdw As DrawingDocument Dim oDim As DrawingDimension Dim oBalloon As Balloon Dim oDimStyle As DrawingStandardStyle Dim oSheet As Sheet Set oApp = ThisApplication
[Code]....
I have an Ipart I would like to have a Ilogic form to change the active Ipart. I tried iPart.ChangeRow but I did something wrong and it doesn't work.
View 2 Replies View RelatedI can't for some reason get this rule to work, simply want to be able to choose what title block to use.
I created a text parameter with the multi-values: TES ELE and TES EQU
I have 2 title blocks in my template called TES ELE and TES EQU
Here is my code, basically, I want to rule to apply the title block based on the selection, which will be done on a form.
If Title = "TES ELE" ThenActiveSheet.TitleBlock = "TES ELE"ElseIf Title = "TES EQU" ThenActiveSheet.TitleBlock = "TES EQU"End IfInventorVb.DocumentUpdate()ThisApplication.ActiveView.Fit
I have found many threads in this forum and have used their solutions for this rule, but for some reason, my rule will not select the title block and place it in the drawing.
Here is a snap of my set-up and my template file is attached
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I am after writing part of rule for ilogic,i need the rule to fill out a custom property with information for me. I have a part that has 2 parameters
parameter 1 = Frontplanangleparameter 2 = Endplanangle
Custom property
iProperties.Value("Custom", "DESC2") =
I need the rule to examine both parameters and if both angles = 0 then DESC2 = ""And if any parameter >0 then
iProperties.Value("Custom", "DESC2") = bevel
My company has recently switched from the H drive to the G drive. This has resulted in a lot of old files still referring to the H drive where the External Ilogic rules used to be. I'm wondering if there's any automatic way to change that? Uploading a pic showing the event triggers as they are now.
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM
I create a thread here: and I have most of what I require, but for some reason I can't iLogic to swap my title blocks within my drawing template.
View 3 Replies View RelatedI am trying to piece together some code for an ilogic rule. This rule should look for a drawing view that is a flat pattern, if it finds one it should change the object layer to our "CNC" layer.
View 3 Replies View RelatedI need an ilogic rule to autmoatically change the style of the parts list in a drawing file.The parts list style already exist in the drawing.
View 2 Replies View RelatedHow do I change the document units using iLogic rules.
View 3 Replies View RelatedI want to be able to have All Work Planes set as 'Invisible' but create a Message.box or Icon that allows me to change the Visibility of any individual workplane(s) physically selected in the browser.
A rule written by another member should do the trick if the following line could be altered so as not to read 'For Each' oWorkPlane but instead for 'Each Selected' oWorkplane.
'For Each oWorkPlane In docFile.ComponentDefinition.WorkPlanes'
'get user input
oInput = InputRadioBox("Select workplane visibility:", _
"Turn ON workplanes for all components", "Turn OFF workplanes for all components", "False", "iLogic")
'Define the open document (top level assembly)
Dim openDoc As Document
openDoc = ThisDoc.Document
[code]....
Is there a way to invoke the iLogic Rule Editor and pass it an existing rule name or external rule for editing?
View 4 Replies View RelatedI need a way to run a rule which is saved in my top-level assembly using iLogic rule which is saved in a part file in the parent assembly.
I have even tried using an external rule in a txt file, but that gives the error "Component: This function can only be used in an assembly." - which makes no sense to me. I hope I am just missing something simple. I cant believe with all its other strengths, that iLogic would be so limited in that regard. Why is there not simply a snippet under the 'Run Other' that allows you to specify an assembly file and the rule name? (like there is for running a rule in a component from the assembly)
I want to simply set a custom iproperty as the Description in each part file within my assembly. I can do this easily at part level with ilogic but I want to be able to run the rule from the assembly level and all the parts run the rule. I am struggling to find a way to do this.
I think this may be the best method I have found but I think it must be far easier?
[URL].......
I am working for customer with a simple item with his iLogic design. He has created a simple form to modify his iProperties. To modify the current material, a multi-value parameter was created and the following rule as a local rule;
"MultiValue.List("MATLIST") = iProperties.Materials
iProperties.Material = MATLIST"
He is now trying to make this an external rule but gets the following error
Error in rule: Mat2, in document: Mat2.iLogicVb
iProperties.Material: is probably a bad material name.
The more info tab says:
System.ArgumentException: iProperties.Material: is probably a bad material name.
at iLogic.CadPropertiesInRule.SetDocMaterial(Document doc, String matName)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?
View 5 Replies View RelatedI'm new to the style library and how to take an existing drawing that was created on one standard, and changing it to another standard I just created. The new standard has different dimension styles, text, and layers. I've added all the styles to my style library and I've set the new standard to the active standard in both the styles and standards editor and the document settings. If I create a new view, it comes in on the new standard, but the existing views are still on the old. How to I get the existing views on the new standard?
View 2 Replies View RelatedOn a daily basis I work with two different types of drawings; machining and fabrication. The machine shop prefers dimensions in decimal inches, and the fab shop only understands fractional inches. Is there any way to set up the styles/standards/templates to allow me to pick out which type of drawing I am creating and have Inventor use the correct object defaults for the dimensions?
View 4 Replies View RelatedI want to create a rule that will warn the user when the plate thickness they are using is not standard. I have already created a multivalue parameter for plate thickness, which lists all standard steel plate thickness's and also allows for custom values.
I was hoping I could create a rule that would prompt a dialogue box warning when the user creates a custom value for plate thickness.
I know this can be done, but like I said, Im bloody useless with iLogic and find it hard to come across relevent examples and/or tutorials online.
I'm currently using this rule for easy PDF making
SaveLoc = "C:Temp"FileName = ThisDoc.FileName(False)Revnr = " rev_" & iProperties.Value("Project", "Revision Number")PDFnaam = SaveLoc & FileName & RevnrThisDoc.Document.SaveAs(PDFnaam & (".pdf") , True)MessageBox.Show("PDF is aangemaakt in C:Temp", "Document creation",MessageBoxButtons.OK,MessageBoxIcon.Information)
The problem with this is that i want to save without lineweight? is there anyway to do this with this code?
I have an ilogic rule with multiple Subs. How could I run one specific sub contained in that rule from an iLogic form or another rule?
View 2 Replies View Relatedi have an iLogic rule in serveral files. Now this rule has to be deleted. This should be done with VBA. I can not find any function to delete a rule using VBA.
I found a function iLogicAuto.RunRuleDirect(rule), but not iLogicAuto.DeleteRule(rule) ...
I can not find any documentation for iLogic/VBA.
I have an iPart which includes iLogic Rule. When I change iPart by table, iLogic Rules are not triggered.
In iLogic Utilities, there is a button "Rules Triggered by Events", If I use "Any Model Parameter Change", the update need long time, looks like Inventor is "No Response". I like the way "Material Change", but I need "part Number" change to trigger the rules. How can I do it? I tried other events as After Open, Before Save, etc, they are does not work.
I have a rule setup for drawings. I need the rule to first determine if the there is a flat pattern view present. In other words, if there is no flat patter view, I want to the rule to stop.
I am very green to ilogic and VB. Running Inventor 2013.
I've caught glimpses of how to do this (For instance, this plugin (Inventor LinkParameters) [URL]...... when trying to actually find information on any documentation of how to get from point A to point B. I can't seem to find anything about ilogic automation / rule creation / ilogic in general, in the object browser at all.
I know code like this exists
Option ExplicitSub RuniLogicRule()Dim iLogicAuto As ObjectSet iLogicAuto = GetiLogicAddin(ThisApplication)If (iLogicAuto Is Nothing) Then Exit SubDim doc As DocumentSet doc = ThisApplication.ActiveDocumentDim ruleName As StringruleName = "Rule0"Dim rule As ObjectSet rule = iLogicAuto.GetRule(doc, "Rule0")If (rule Is Nothing) Then Call MsgBox("No rule named " & ruleName & " was found in the [code].......
(and even fixed the error it gave me due to the original code leaving something out) , but any info on the GetRule method is.
Is there any way to create a rule to create a substitute on my weldment files?
what I need is something like:
If this document file type is weldment then create shrinkwrap substitute, go to the file (substitute) read the custom iproperty "area" and write to this document custom iproperty "area for sand-blasting" activate LOD Master then delete substitute LOD.
The propose is for purchase department to know the area of the assembly (only the area of visible surfaces).
Is there any command/option to add a keyboard shortcut for ilogic rule?
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
