Revit :: Underlay When Wall Is Higher Than One Level
Nov 3, 2013
I have trouble showing Underlay for level view when dealing with in-place walls. Basically, they dont work with Underlays - nothing shows up (even in wireframe mode).
Please have a look at attached file, dropbox link: [URL] ....
There is a Blend wall that starts on Ground level and goes as high as Top level. When you check whats visible on different levels (and RCPs) everything is fine (views respond to changing cut level and so on) - but when you try to Underlay one of the level views - nothing shows up. Basic idea is to show top edge for tracing with Linework tool - so it shows as Overhead.
View 9 Replies
ADVERTISEMENT
Jun 18, 2013
The underlay does not show up for Level 1 when I am on Level 2, but it does show up for Level 2 when I am on Level 1. the underlay option is on for Level 1, so I'm not sure why it's not showing up. I am using Revit 2014.
View 1 Replies
View Related
Dec 4, 2012
I'm having problems seeing the walls I drew at the foundation level in this project. The walls should be shown but I can't get to see them except in a 3d view. Also, when i intended to draw them, I think I should have done it from the foundation level plan but I could not set the plan view to see the above objects in order to draw from them. I drew it from another level and then I modified their base and top constraints afterwards..
I tried to modify the view range of the foundation level without success.
View 6 Replies
View Related
Aug 6, 2012
I am working on a project with Split Levels like a Multi-level CarPark. I need to produce plans by combining two Levels which are at 3M height difference.
While using Plan Region, Some of the walls dont show as cut, though their height is more & above the Cut Plane Level.
I did find a quick solution online here - [URL] ... This trick is still not working for some of the walls..
View 1 Replies
View Related
Nov 22, 2012
I already have several kewords set up in lightroom 4.2 (Win7). I want to add a 'higher level' keword to include some of those keywords already present. For example - If I already have
Dog
Cat
Bird
How can I add 'Animals' so that the result is -
Animals
Dog
Cat
Bird
I know that I can add 'lower-level' kewords to existing keywords.
View 2 Replies
View Related
Aug 10, 2011
Never seen this before, but I'm having an issue with mass incorrectly reporting in high level assemblies.
See the attached jpgs. The bracket reports a mass of 29.7 kg when opened on its own, but when checked in the browser of the next level up, its mass is reported (incorrectly) as 23.1 kg. A little investigation has revealed that the error is in the stiffening webs (which have been modelled as a single ipt). Again, if the webs are opened on their own, the correct mass is reported, but if the mass is queried in the browser of the sub-assembly, an incorrect value is shown.
In this case, it is not that significant, but if Inventor cannot be relied upon to report correct masses in higher level assemblies, this is a real worry.
Running Inventor 2009.
View 9 Replies
View Related
Jul 16, 2007
I am having a little trouble with some doors showing up on the level 1 door schedule that are actually on level 2. They are curtain wall doors.
View 6 Replies
View Related
Jan 31, 2014
I am rendering projects to print them in large format pages, but the printed images the edges are not so sharp, so I tried to rise the render quality, but the final result is always in 72. How can I give a higher quality in order to print those images in large format.
View 1 Replies
View Related
Apr 12, 2012
Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies
View Related
Jul 25, 2013
I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
View 9 Replies
View Related
Dec 4, 2012
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies
View Related
Nov 27, 2011
Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
View 1 Replies
View Related
Feb 26, 2013
We are creating a building for an aiport wherein the scale actually must be higher to fit onto a A1 size poster.
So currently the scale of 1.5000 is to high to fit the complete plan on the poster. Are there any options to get the complete file on an A1 poster by simply adjusting the scale size? or are there other options?
View 3 Replies
View Related
Oct 31, 2013
When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
View 1 Replies
View Related
Apr 16, 2013
I am trying to make a floorplan of my house in Revit 2013, but I am having an issue when it comes to one wall in my house. I have an opening in the Master Bedroom that leads to the bathroom. This wall has a weird arched-like opening in it and I have no clue how to make this in Revit. I have attached a sketch.
Also, my exterior walls are 7' tall but the interior walls start at 7' and go up to 8' once in the middle of the house and reduce back to 7". How does one set that up in Revit?
EDIT: May have made the image too small to see, but the top is not arched, it is actually half of a decagon.
View 3 Replies
View Related
Jul 29, 2011
I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
View 8 Replies
View Related
Jan 26, 2014
Joining roofs.
I'm trying to join two roofs together by extending onto the other - Unfortunately the one to be extended is higher than the other roof (see attached image).
Both roofs are created by footprint.
Revit LT 2014
View 2 Replies
View Related
Jul 10, 2013
I want to show a linked view from another proyect that has an underlay ceiling plan,I'm using By linked view option to show exactly the same view from the original project but the underlay RFP doesn't appear. I just want to show the outline of some skylight diffusers from the ceiling plan.
View 1 Replies
View Related
Jul 18, 2011
I've attached a couple images of a visibility problem I'm having. The ROOF image shows the underlay view I'm using in the NO ROOF view in my revit project. I modeled all four of the dormer roofs the same, in place roof components, and they show up in the roof plan, but not when I use the roof plan as an underlay for my framing plan.
They don't show up when I toggle on the hidden elements tool either. I checked to make sure I didn't have coarse scale visibility turned off as well as if I had not visible in plan unchecked. These things seem fine, plus, as you can see, it shows up in it's own view. View range seems to be fine too. I can't figure out why these elements don't show up.
View 4 Replies
View Related
Jan 18, 2013
I am having problems with my rendering, yesterday everything was working fine but today every time i set rendering quality higher than draft, Revit either fails to render (rendering area goes black) or the pc crashes and i get bluescreen.
View 6 Replies
View Related
Apr 7, 2013
“Drag wall end” to the edge of the wall (indicated),In the attached screenshot, I wanted to drag the end of the temporary dimension from its location to the end edge of the wall but sounds not to respond!
How this temporary dimension can be dragged to the edge of the wall?
View 3 Replies
View Related
May 30, 2013
I'm modelling liner plates on a conveyor chute and I want the liners and the fixing bolts to align on between the walls which are different. angles.
I've modeled the liners on the first wall how I want them and now want to project lines from the top and bottom of the liner plates as well as the centers of the bolt holes on this wall to the adjacent wall.
I cant seem to get the lines to project onto the adjacent wall at the same level.
I've posted two images of the model that hopefully illustrate the problem. I would love to put a zipped folder of the model up to which is under 3MB in size but I keep getting an error message saying the size of the attachment is too large and that the maximum size is 1,572,864 bytes.
View 4 Replies
View Related
Aug 14, 2013
I have a model with multiple floors. When I am in Level 2, with Level 1 as an Underlay I can still edit walls and other objects from Level 1. I know there is a way to lock the Underlay, I just can't make it work. Pinning the entire Level 1 is not an options, because this is not View dependent.
View 7 Replies
View Related
Nov 8, 2012
I'm redoing some old projects in Revit, and I'm using a background image to vastly facilitate the process as the projects are almost perfectly drawn, I'd like however, to use a background image as reference and keep the underlay (e.g.: show the bg image for level 2 and over it show the level 1 underlay) but I couldn't find a way to do that.
View 2 Replies
View Related
Mar 10, 2013
If there is no level 3 in the project browser. How can you add a 3 level to the project.
View 2 Replies
View Related
Jan 31, 2012
Is it possible to copy a phase from one level to the other. For example, on Level 1 I have walls that are Existing, Demo, and New Construction.
If I select the objects and copy to clipboard and paste the objects to another level they will all switch to New Construction. Is there any way we can have the walls remain the same phase when copied to another level?
View 1 Replies
View Related
Mar 9, 2012
Is there a way to set the visibility of elements in a 3D view according to the Level they are associated with?
The VG tab which opens the filter dialog provides a check box for the "Levels" category, and the relevant parameters are made available.
But I can not seem to create a filter rule which evaluates any of those parameters (name, elevation, etc...) to then isolate the visibility of those elements in the 3D view that either meet, or do not meet the criteria. Nothing seems to work.
To achieve a "similar" effect in a 3D view, I can use a Section Box, but that is a very clunky and imprecise way.I can also create a Shared Parameter for "Level" and perhaps filter successfully that way, but that seems redundant with the Levels intelligence already established.
View 7 Replies
View Related
Oct 20, 2011
It is almost seeming like you should not try to creat these views in templates to get a jump start on projects. but for the life of me I am not understanding how you can get level lines to appear elevations that have already been create. or in new ones?is there away to successfully get these back?
View 3 Replies
View Related
Apr 9, 2012
I noticed that Revit likes to show the entire stair going down. This works for me in a lot of cases but I have a project that the second floor is showing the stair all the way down to the first floor, and there is another stair going from the second floor to the third that I really need to see.
Plan regions don't seem to allow me to add a break line below the second floor and see the stair from the second to the third floor. The floors are on and the view is set to hidden.
The attached png shows the up stairs in blue that I would like to see and the Down stairs I would like to cut at the landing.
View 3 Replies
View Related
Nov 6, 2012
The “level” indicators are not cropped exactly based on the “crop region”,the “crop view” doesn’t crop the “level” indicators exactly as they extend outside the “crop region”.
View 4 Replies
View Related
Oct 22, 2013
I've added some levels that are pretty close together. In elevation and section the labels overlap. How do I bend or crank the elevation line at the end so that the labels don't overlap?
View 2 Replies
View Related
