I am having problems with my rendering, yesterday everything was working fine but today every time i set rendering quality higher than draft, Revit either fails to render (rendering area goes black) or the pc crashes and i get bluescreen.
View 6 RepliesI downloaded Revit 2013 and this is the first project I started working on. I rendered a few cameras and they turned out ok, but all of a sudden the rendered images turned out blue and yellow. I didn't make any changes in the materials or lighting, but they still turn out the same. I even tried rendering in another computer but nothing changed. I attached the image.
View 9 Replies View RelatedSome of the edges are very pixelated and I need this icon to be very high quality. What is the best way to do this?
View 9 Replies View RelatedCapturing sd dv from a sony handycam using VS9 and a USB conection to pc. Few days ago all seemed to be ok was able to capture at 640x480 (I think) but now for some reason information section is showing 320x240 with a corresponding really poor quality preview. No matter what changes I try to make in the capture options or project properties etc it will not now allow me to capture at a higher quality. The options menus don't even show a higher quality available than 320x240. Tried at both AVI and Mpeg format capture settings but no change.
windows XP Home
ATI Radeon 1200 series
32 bit
1gig RAM
PAL region
I have used "Share My Screen" meeting feature a few times on my machine.
a client and it gave me the blue screen of death crash and forced a restart. After it did this 3 times I gave up.
Windows XP Home 2002 SP3
PhotoshopCS4 Extended
CS4 Production Premium
RADEON X300 SE 128MB Hypermemory
Intel Pentium (R) CPU 3.00 GHz 2.99 Ghz
2.50 GB RAM
I am rendering projects to print them in large format pages, but the printed images the edges are not so sharp, so I tried to rise the render quality, but the final result is always in 72. How can I give a higher quality in order to print those images in large format.
View 1 Replies View RelatedWe are creating a building for an aiport wherein the scale actually must be higher to fit onto a A1 size poster.
So currently the scale of 1.5000 is to high to fit the complete plan on the poster. Are there any options to get the complete file on an A1 poster by simply adjusting the scale size? or are there other options?
I have trouble showing Underlay for level view when dealing with in-place walls. Basically, they dont work with Underlays - nothing shows up (even in wireframe mode).
Please have a look at attached file, dropbox link: [URL] ....
There is a Blend wall that starts on Ground level and goes as high as Top level. When you check whats visible on different levels (and RCPs) everything is fine (views respond to changing cut level and so on) - but when you try to Underlay one of the level views - nothing shows up. Basic idea is to show top edge for tracing with Linework tool - so it shows as Overhead.
Joining roofs.
I'm trying to join two roofs together by extending onto the other - Unfortunately the one to be extended is higher than the other roof (see attached image).
Both roofs are created by footprint.
Revit LT 2014
I've worked on AutoCad for many years but only just upgraded to Architecture 2012, so have tried my first 3D! I am struggling with my render quality, i am rendering in Presentation quality yet the finished render is still a little blurry and quiet small i have sellected -640x480.
View 0 Replies View RelatedI've recently updated to cs6 and was looking forward to the video editing aspect. Very familiar with iMovie, and don't like the somewhat limited adjustments. Unfortunately, when I rendered my first video in CS6, the quality was horrible.
View 10 Replies View RelatedI'm working on a video to propose to my girlfriend with next month, and I have all the edits done and the project is complete (including the DVD menu), but every time I render it it loses quality, and then when I burn a disk it loses even more quality. I'm just burning it onto a standard DVD so I know it won't stay fully HD, but it's pixelated in several parts which really is annoying.
Some details:
Original file properties (.mts):
File Format: NTSC HDMV
Video Type: H.264 Video, Upper Field First
Attributes: 24 bits, 1920 x 1080, 16:9
Frame Rate: 29.970 frames/sec
Data Rate: Variable bit rate (Max. 20899 kbps)
I don't know what camera they were shot on, a friend did the shots for me and I didn't think I'd need to know the camera specs.
I've tried rendering using several of the default options in the Share tab (MPEG Optimizer, DVD, MP4). So far, MP4 has worked the best.
When I burn it to a disk, though, it gets really bad. I tried burning straight from the project and burning from the rendered video file. Burning from the rendered file was less pixelated, but still not as clean as I want it to be.
I am getting very poor rendering quality for HD files. If the clip is “untouched” by VS it will render fine. However any changes to the clip either by adding transition, modifying brightness, color, adding title overlay etc. causes significant lost of quality and creates very flickery output with jerky movements.
Original clip
[URL]
Same clip but rendered by VS X4
[URL]
Here are the steps to do the test:
1.Download files from provided links:
a)Original clip : [URL]
b)Project file : [URL]
c)Project screen shot: [URL]
2.Create folder in your C dirve called “Test” and place downloaded files in it.
3.Open provided project file in VS X4. This should have the original clip placed on the time line twice. The first one is not modified clip and the second one has modified brightness just to force the rendering)
4.Render it to the file using MPG Optimizer. (i.e. Share -> File -> MPG Optimizer -> Accept -> Save) This should produce AVCHD 1920 x1080 60i file. See the project screen shot “Test.jpg” as a reference.
5.Play both source and rendered files in Windows Media player or TV and compare the smoothness of movements. R
I am doing lighting now. Everything is fine except a scene.When I open the scene,it's blank in the preview window but everything is here,just like the first picture.When I open again(didn't close the maya window),it's better but still blank in the default quality rendering,like the second picture.Until I switch to the high quality rendering mode,it just display something like the third picture.
View 1 Replies View RelatedI´m quite frustrated after discovering that some of my images look quite poor displayed by the slideshow module. My situation ist as follows:
LR 5.2 running on Mac OS X 10.8.5, 1:1 previews are rendered, preview quality is set to high, and I´m using a sample image showing a dark cloudy sky with some fine gradients; my slideshow preset doesn´t use any borders as I read this often causes quality issues.
When I´m in the Develop module, there is no problem at all, even in fullscreen display mode on my 1920x1200 display the gradients are perfectly rendered.
In Library module, when displaying fullscreen, quality is okay, but I can see some slight difference compared to the Develop module - which I understand after reading that in Develop the output is based on the actual raw data, and in all the other modules on rendered previews.
Now, when in Slideshow module, the image quality is significantly lower than in Library and I see some quite obvious banding in the gradients. I don´t have problems with blocking artifacts but the banding/posterization is considerably worse compared to a JPEG export with a quality setting of, for example, 75.
I can´t imagine LR´s slideshow tool would be working with a lower color depth than the 8 bit as in standard JPEGs, right? Did I miss any of LR´s parameters that influence the image quality of Lightroom slideshows or of the previews used therefore? Otherwise do you have some other explanations or hints for me in order to get this fixed? We do everything to capture our images in the best possible quality so we should also be able to present them properly after all...
I am confronted with a considerably quality loss when I edited and rendered the material from my Sony HDR-CX130 camcorder. It shoots *.m2ts 1920x1080 at 50i (this is in fact 25 fps, I assume).
The loss is visible when there are moving objects or when the camera moves: very not-fluent and not-smooth movement-representation, while the original footage playbacks fine and smoothly in any mediaplayer (Sony PMB or Windows Mediaplayer).
As if the rendered material has a framerate of 12 fps! Which isn't the case, in fact.
I did some experiments: render to other formats like MPEG, tried it on the laptop of a friend who also has CVS X4 installed (W7 SP1, i5 2,3GHz, 4GB RAM),I used properties of first videoclip (which actually doesn't happen), set camcorder at 50p; all without better results.
Project properties I use in CVS X4:
PAL (25 fps)
Microsoft AVI-files
8 bit, 1920 x 1080, 25 fps
Frame-based
Microsoft Video 1
This I was told here to use in order to get stills that are also 1920 x 1080 in size.[URL]
Is the un-fluent playback of edited AVCHD normal, will it be better in version X6?This is visible when playing back the rendered footage in Sony PMB and WMplayer as well.
I have an issue where in Photoshop, opening a menu and clicking on something like, File > New or any other option, will leave a blue shadow on my screen, of that menu item. It persists over every program until I restart the computer, even if Photoshop has been closed. This has only happened in the last week.
Is this an issue with Photoshop, or is it my computer?
Windows Vista Home PremiumHP Pavillion m7790yPSE 7.plenty of space on the hard discs and plenty of RAM.PSE 7 worled fine for months until a few days ago. Now, when I launch 7, the initial welcome screen (chose Organizer, Editor etc) appears for half a second, then the conmpture crashes with a blue screen error message saying that a bad driver was detected that caused the computer to shut down. Here are all the things I have tried - none worked.I did a deep scan in Safe Mode with my antivirus - results cleanI ran the Winodws utilities to check for errors in memory and hard drive - results clean.I used the Windows driver updater to update each and every driver - no failures.I reinstalled PSE 7I reinstalled my HP printer softwareI read the Windows event manager messages about this crash and all that it says is that I have a driver problem.
View 3 Replies View RelatedI recently built a PC for photo editing, and I am receiving the BSOD at different points when Lightroom is open. The first time it happened was when I was moving about 1000 raw files from one folder to another (did it twice to me doing that). From there, I grabbed the latest video card driver from Nvidia, and I also went into the bios and set my memory back to "Auto" rather than 1600 (which is what it's rated for). Thought maybe it was hardware related. Everything was going fine, I did some editing, and then while it was just sitting there with LR3 open, I got the BSOD again.
Here is what I'm running:
CPU - i7 3.4ghz 2600k
Mobo - Asus P8Z68-V LX LGA 1155 Intel Z68
RAM - G.SKILL Ripjaws X Series 8GB 240-Pin DDR3 SDRAM DDR3 1600
System SSD - Corsair Force Series GT CSSD-F120GBGT-BK 2.5" 120GB SATA III
-I have Windows 7 64-bit, Photoshop CS5.5 and Lightroom 3 installed on this drive and I also have current project photo files stored on this. Once done editing, I export them to a 1TB HDD.
Video - EVGA GeForce GTX 560 (Fermi) 1GB
Here are the details after logging into Windows after the crash:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
[Code]....
The program opens normally and after 3-5 seconds I get a blue screen crash. Just before the crash, photoshop displays a message about a problem with the display driver and GPU. I am unable to read the entire message before the system crashes. I re-installed the video driver and CS4 but the problem persists.
This is a recent phenomena (two days ago). The program operated normally with the current OS/software/hardware configuration for over a year.Windows 7, SP1 (64-bit)Intel Core2 Q9550 @ 2.83gzh, 8gb RAMNVIDIA GeForce GTX 550 Ti video card (updated driver)
I attempted to copy with base point some blocks from one drawing to another and got a blue screen saying physical memory dump, and then my computer restarted. I tried the same thing using the insert as a block, but had the same problem. I am using autocad 2012
I'm running Windows 7, it says with 8gig ram, and video card is a Intel(r)hd graphics family. The computer is less than 2 weeks old.
One of my end users reports to me that his computer has been crashing. We soon learn that it crashes every time he starts AutoCad LT 2006.
What I have done so far is completely removed autocad and all associated programs. Reinistalled, installed a newer version (Autocad LT 2007), upgraded to the latest bios and firmware on the machine. Replaced the RAM, and just about everything else under the sun and this machine still crashes every time you start auto cad. I asked the user when the last time was that it worked and he said he was using it about a month ago just fine.
I installed the program on my identical laptop and it works just fine.
I ran the BSOD via Kernel mode through WinDBG and it points to ACPI.SYS. Being that this is a heavy system driver file, need getting this program to actually work short of me reinstalling the entire OS on the machine? The stop error is the 0x00000050 memory error.
I capture a lot of brochures from holiday trips etc including outline maps of local areas. I then add rthese to albums, shows etc.
When I scan these, they frequently include a significant blue (sometimes grey) tint most noticeable at the edges or on folds in the items being scanned, presumably representing areas where the contact between the document and the glass is not quite as good as elsewhere.
I've tried weighing down the scanner lid, but I've not noticed any noticeable improvement.I'm now playing with the settings to see if I shoude be tweaking anything to improve this.
In the meantime, I'm left with a number of docs to clean. I've been doing this with the clone tool, but it is very time consuming.
Every now and then, but recently more then I want, I get a blue screen while doing a stress analysis.
I have a pretty simple assembly with just 2 parts in it. One of these parts is built as a multibody part. It can be that the blue screens started to occur after I made a multibody design, however I am not sure about that. I downloaded and installed Inventor R13.
I had a blue screen while working with Lightroom and now I can not open catalog. I got this window: recover data from the directory? Option "Import from another catalog" also does not work.
View 2 Replies View RelatedThis happened 3-4 times when I was using the trial version and I wasn't sure which program from the trials that was doing it, but it started after I downloaded and used the Adobe Clound trials so I stopped using them. Eventually I went ahead and upgraded to the subcription and have been using Illustrator and Muse for a few days now and have not had a problem until today. I had Photoshop open and minimized, as well as Illustrator, and walked away from my desk. When I returned, the screen was blue with the Windows "shut down to prevent further damage" screen. I have a photo of the message. I realized that I had been using Photoshop the last few times this happened also. It never happened before I tried this software and stopped when I stopped using the trial.
View 11 Replies View RelatedEvery few weeks when opening a drawing, my computer restarts (just plain crashes windows and it restarts automatically). This only happens using AutoCAD, no other program has done this as of yet. I have no service packs installed and I haven't seen another post that refers to this problem. When I click on "Check for solution", nothing comes up.
View 8 Replies View RelatedFor some reason the 'Full Screen Mode with Menu Bar' option has a blue background now. The background used to be gray, and then one time i opened up Photoshop and now the background is blue. It is very annoying and affects my painting. The grey was neutral, now it is blue so my colors are going to appear off.
If you don't know what i mean: Open Photoshop, make a canvas (new image) Hit the key "F" on your keyboard 2 times so the canvas takes up the entire page but the menu bars are still up. The color around the canvas is Blue, when it has ALWAYS been gray.
My computer has been extremely stable for the past few years without a single BSOD... Until recently when I updated LR4 to LR5.
After a good 15-20minutes within the program, all of a sudden it will BSOD. It does not happen doing ANYTHING else with the computer, including gaming such as FSX and other simulators which can be very heavy on the GPU/Memory/etc...
I ran memtest and it passed.HD Tune on my HD's, no errors.I reduced my overlock to be sure it was not a voltage issue or something, but same results. Prime95, passed.
I tried doing a "Repair" with the LR5 installer file, but it still happened.
Windows 7 - 64bit professional edition
Intel i7 2600K CPU
16GB DDR3 Ram
570GTX GPU
Lightroom is running off my 120GB SSD Drive, with it's catalog on my 2.5TB internal HD (one of a few).Updated my GPU drivers (clean install) and ran windows driver verifier to make sure all drivers were "proper".
I have a very important shoot I am trying to process and this is a big bummer right now... Again, been using LR4 every since it was released and never had a BSOD... Right after I upgrade, it starts happening once things start get a bit demanding (quick editing or quick adjustments). I have not noticed a trend when it does crash, but it may have something to do with the crop and/or straighten tool... I have noticed it has BSOD on me when doing some of those, but I believe other times as well. I will make sure to pay attention from now on to report any reliable trends when it happens.
I've just started using Photoshop CS6 via Creative cloud. (Before i used a DVD version of CS5)I'm having a weird problem with the liquify filter:When I want to open a picture in the filter it shows only a blue screen... Why? What happened?
At first I thought maybe it couldn't'nt work with the dng format and then I tried opening a jpeg in the liquify filter, same problem.I've had no problems in CS5 and I'm working on the same computer.
Doing a photo merge of 6 different pictures, I have a systemic blue screen crash using Photoshop CS6 extended. There is a win32k.sys error message (page fault in non paged area).
I tried my photo merge 5 times (once with only 2 pictures) and it always crashed. I have 32 Gb RAM and a i7 3960-X CPU + a GeForce 690 GPU.