I've worked on AutoCad for many years but only just upgraded to Architecture 2012, so have tried my first 3D! I am struggling with my render quality, i am rendering in Presentation quality yet the finished render is still a little blurry and quiet small i have sellected -640x480.
View 0 Replies
I've recently updated to cs6 and was looking forward to the video editing aspect. Very familiar with iMovie, and don't like the somewhat limited adjustments. Unfortunately, when I rendered my first video in CS6, the quality was horrible.
View 10 Replies View RelatedI'm working on a video to propose to my girlfriend with next month, and I have all the edits done and the project is complete (including the DVD menu), but every time I render it it loses quality, and then when I burn a disk it loses even more quality. I'm just burning it onto a standard DVD so I know it won't stay fully HD, but it's pixelated in several parts which really is annoying.
Some details:
Original file properties (.mts):
File Format: NTSC HDMV
Video Type: H.264 Video, Upper Field First
Attributes: 24 bits, 1920 x 1080, 16:9
Frame Rate: 29.970 frames/sec
Data Rate: Variable bit rate (Max. 20899 kbps)
I don't know what camera they were shot on, a friend did the shots for me and I didn't think I'd need to know the camera specs.
I've tried rendering using several of the default options in the Share tab (MPEG Optimizer, DVD, MP4). So far, MP4 has worked the best.
When I burn it to a disk, though, it gets really bad. I tried burning straight from the project and burning from the rendered video file. Burning from the rendered file was less pixelated, but still not as clean as I want it to be.
I am getting very poor rendering quality for HD files. If the clip is “untouched” by VS it will render fine. However any changes to the clip either by adding transition, modifying brightness, color, adding title overlay etc. causes significant lost of quality and creates very flickery output with jerky movements.
Original clip
[URL]
Same clip but rendered by VS X4
[URL]
Here are the steps to do the test:
1.Download files from provided links:
a)Original clip : [URL]
b)Project file : [URL]
c)Project screen shot: [URL]
2.Create folder in your C dirve called “Test” and place downloaded files in it.
3.Open provided project file in VS X4. This should have the original clip placed on the time line twice. The first one is not modified clip and the second one has modified brightness just to force the rendering)
4.Render it to the file using MPG Optimizer. (i.e. Share -> File -> MPG Optimizer -> Accept -> Save) This should produce AVCHD 1920 x1080 60i file. See the project screen shot “Test.jpg” as a reference.
5.Play both source and rendered files in Windows Media player or TV and compare the smoothness of movements. R
I am doing lighting now. Everything is fine except a scene.When I open the scene,it's blank in the preview window but everything is here,just like the first picture.When I open again(didn't close the maya window),it's better but still blank in the default quality rendering,like the second picture.Until I switch to the high quality rendering mode,it just display something like the third picture.
View 1 Replies View RelatedI´m quite frustrated after discovering that some of my images look quite poor displayed by the slideshow module. My situation ist as follows:
LR 5.2 running on Mac OS X 10.8.5, 1:1 previews are rendered, preview quality is set to high, and I´m using a sample image showing a dark cloudy sky with some fine gradients; my slideshow preset doesn´t use any borders as I read this often causes quality issues.
When I´m in the Develop module, there is no problem at all, even in fullscreen display mode on my 1920x1200 display the gradients are perfectly rendered.
In Library module, when displaying fullscreen, quality is okay, but I can see some slight difference compared to the Develop module - which I understand after reading that in Develop the output is based on the actual raw data, and in all the other modules on rendered previews.
Now, when in Slideshow module, the image quality is significantly lower than in Library and I see some quite obvious banding in the gradients. I don´t have problems with blocking artifacts but the banding/posterization is considerably worse compared to a JPEG export with a quality setting of, for example, 75.
I can´t imagine LR´s slideshow tool would be working with a lower color depth than the 8 bit as in standard JPEGs, right? Did I miss any of LR´s parameters that influence the image quality of Lightroom slideshows or of the previews used therefore? Otherwise do you have some other explanations or hints for me in order to get this fixed? We do everything to capture our images in the best possible quality so we should also be able to present them properly after all...
I am confronted with a considerably quality loss when I edited and rendered the material from my Sony HDR-CX130 camcorder. It shoots *.m2ts 1920x1080 at 50i (this is in fact 25 fps, I assume).
The loss is visible when there are moving objects or when the camera moves: very not-fluent and not-smooth movement-representation, while the original footage playbacks fine and smoothly in any mediaplayer (Sony PMB or Windows Mediaplayer).
As if the rendered material has a framerate of 12 fps! Which isn't the case, in fact.
I did some experiments: render to other formats like MPEG, tried it on the laptop of a friend who also has CVS X4 installed (W7 SP1, i5 2,3GHz, 4GB RAM),I used properties of first videoclip (which actually doesn't happen), set camcorder at 50p; all without better results.
Project properties I use in CVS X4:
PAL (25 fps)
Microsoft AVI-files
8 bit, 1920 x 1080, 25 fps
Frame-based
Microsoft Video 1
This I was told here to use in order to get stills that are also 1920 x 1080 in size.[URL]
Is the un-fluent playback of edited AVCHD normal, will it be better in version X6?This is visible when playing back the rendered footage in Sony PMB and WMplayer as well.
I am having problems with my rendering, yesterday everything was working fine but today every time i set rendering quality higher than draft, Revit either fails to render (rendering area goes black) or the pc crashes and i get bluescreen.
View 6 Replies View Relatedwhy i cannot change the color of the background when rendering? It is always black, and i cannot attached or make new material, if need to attach jpeg or new texture on my drawing, cannot create new material. what should i do? im currently using autocad for mac 2012.
View 1 Replies View RelatedMy boss has seen a video clip that start with an aerial view of a building, then a rotation around that building- a top view which turns into CAD or similar drawing. Then the building is viewed floor by floor from top to ground floor. Then the clip carries on showing a production line with conveyor belt moving and so on.
Now he wants to prepare a similar thing for a job he is pricing at the moment. He wants to know what packages are needed and time scales for getting something like this ready. I have never done any animation don’t know where to start.
I can produce 3D drawings with CAD and Solid works and thats about it.
I need to show crisp large format cad drawings in a slide show presentation. Any professional way to do it?
View 4 Replies View RelatedI created *.ipn file and I tried to record the animation AVI file. After I finished playing the animation, I can see the AVI file was created but with 0KB, the avi is empty and cannot open.
I have no problem to create AVI file in my laptop but have such problem in my office's desktop computer.
When I go to animate an assembly in presentation, it will let me set the camera in the sequence view, however I can't seem to find a way to delete the camera. I put too many cameras and now the animations making too many transitions between tweaks. Is there a way to delete the set camera?
View 1 Replies View RelatedI have put photos in the part and the assembly but they wont show up in the presentation.
View 2 Replies View RelatedI have a large assembly in Inventor Pro 2012 where I'm trying to show the installation process in Presentation. Since the sequences behave as opposite to an explosion, all the parts return to their original location after a tweak.
However if I am trying to show a jig that works in the installation process that I want to show being removed, how can I do that. In the assembly, the jig is constrained to the the part being installed, which makes it very difficult to show it being removed since the move happens first then it mates to the part during an animation. Any way to reverse the animation sequence?
I want to assign the viability and open part commands to the marking menu in the presentation environment, but they are always greyed out. They show in the drop down menu below it though??
Screenshot attached. INventor 2013.
I have exploded my assembly in a presentation file, but I have not been able to record it. I have recorded videos previously, but this time the record button simply does not stay pressed. I have tried recording the video as WMV and as AVI.
View 8 Replies View RelatedIs there a way to remove the trails from a presentation one they have been added using the tweak components command ? These are shown on the animation but I can't seem to remove them without completely redoing the animation.
View 3 Replies View RelatedI have made a building and would like to do some cam shots while doing a "walk" from room to room. Is this possible with a the cam on point of view angle? have tried it out with showcase but the keyframe animasjon only give me overview shots.
should i go for 3dmax or can i do it with inventor studio/showcase /publisher...
I've created a view in my presentation file and tweaked all my components to where I want them. How do I change the level of detail associated with a particular explosion already created? I know when you create the view you can select which representation and level of detail to use, but how do you change these after the exploded view is created?
View 6 Replies View RelatedWe have the following problem / bug and i was wondering if others can reproduce it.
(IV2013, SP1.1)
When adding a new sub-assembly to an existing ipn, the newly added assembly doesn't have the + sign to expand it. (see image)
Steps:
1. create a part. (anything will do) - Part1
2. make an assembly and add Part1 a few times. - Assembly1
3. make another assembly and add Assembly1 a couple of times. - Assembly2
4. create a presentation file with Assembly2, add a tweak for good measure. - Assembly2.ipn
5. Save the ipn. (and any other unsaved files)
6. now go back to Assembly2 and add another instance of Assembly1.
7. look at the presentation again, if it's the same as our situation there shouldn't be a + next to the newly added instance.
I'm using Autocad 2013 LT EN, I'm trying to add new presentation from a tool palette. Is there a way to do that in LT? I thought maybe an icon with macro?
View 3 Replies View RelatedI hid a part or something in a presentation drawing. This was within the presentation environment.
It asked if I wanted to remove associativity. I did. Now I want to put it back. How do I turn it back on? Basically, I've added new parts and they won't show up in the presentation explosion.
Inventor 2013
Smoother (finer) presentation for the contour,
In the screenshot below, the contour looks “ugly”! Is there a way to make it much more smoother like what we see for example in the second screenshot .
When you change a viewport to presentation mode the walls change to orange. is it possible to change this color?
View 2 Replies View RelatedI created a IPN from an IAM for an exploded view. When I put the base view of that exploded assembly into a drawing, one of the main components is invisible. So when I mouse over the edge of the view, the bounding box does not even reach high enough to possibly include this component. All other components are visible in their correct exploded positions. I tried deleting the view and placing it again, but it does the same thing. The colored and shaded preview just before view placement shows all parts where they should be.
View 4 Replies View RelatedI'm creating an exploded view presentation of a large assembly. I understand that when sequences are created, the parts that are hidden at the time are added to the Hidden folder of that sequence. But since I had to work back and forth between sequences to tweak the order, I want to hide some parts that I just added and that belong to a previous sequence. The part is now randomnly hanging in space when the camera angle is trying to show another part of the assembly. How can I make parts hidden for some sequences but not other? There's no option to hide parts, only to unhide them from the Hidden folder. BTW, using Inventor Pro 2012.
Look at picture to better understand the question.
i have created a presentation where i have frozen some layers in the object field. but later on when i create new layers of course they appear in this presentation until i freeze them. is there a clue to lock the presentation at a state to avoid updating the presentation by freezing manually each new layer .
View 1 Replies View RelatedMy problem is related with the quality of a image.
My question is how to maintain high quality (original quality) of a image after resizing it?
If i resize it with same ratio like:
2816x2112px to 1600x1200px (4:3)
2816x1584px to 1920x1080px (16:9)
Mainly i use scale image option in Gimp. But now i need to resize many images for my work so i tried David's Batch Processor to resize my images. After using it, i found there is some quality promble with the resized image.
Then i tried, the scale option with, use quality setting from original image and JPEG quality parameter is 95, in gimp but the problem is same. I did it with also with David's batch processor- JPEG quality parameter is 95.
Other thing is that, the original image 2816x2112px (4:3), size- 3.6 MB is displaying in image viewer with 47% and the resized image 1600x1200px (4:3). size- 1.2 MB is displaying in image viewer with 83%, So my questions are: How can i check the quality of a image after resizing it, means the image is exactly same as the original? Or Is David's Batch Processor maintain the original quality of the images after resizing?. I realy need to resize many images for my work.
Is it possible to add an exploded view to a presentation file via the api? I can access existing exploded views, but did not see an add method.
View 2 Replies View RelatedOne of my draftsman is trying to put an identification Tag on one of our assembly.We made a symbol with our tag, and we put it on whatever where trying to identify directly on the presentation.
Our problem is that where not able to remove whatever is behind that symbol so that we can make that Tag readable.Is it possible to make only part of a line invisible in our presentation?
