Smoother (finer) presentation for the contour,
In the screenshot below, the contour looks “ugly”! Is there a way to make it much more smoother like what we see for example in the second screenshot .
How to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedOpen a new doc in Greyscale mode, and use your Color palette in RGB Spectrum to select your hue of grey/colour. And to get a finer shade of grey/colour within the hue of grey/colour you're working with, click on the little arrow (top right of Color palette) and open up the drop down menu and select Current Color. This will give you a finer palette of grey/colour saturation to work with.
View 2 Replies View RelatedI'm going to be editing a series of images, cut from a movie, to make an animated gif. I'll be superimposing the face of one man onto that of another in each individual frame.
I know my way around photoshop (layers, brushes, effects, etc.), and I'm using CS2.
During some frames I will need to awkardly stretch the image of the superimposed face (Connery's) to fit that of the original actor's (Martin Sheen's) -- the frames in which his head is turned to the his right, as can be seen in the image below. There are also frames where the lighting on his face changes and smoke pours over his face. These are my main challenges.
I could use help with the lighting effects (casting shadows over a layer), the military style face paint, and the smoke effects, as well as general guides to photoshop face-transplanting
If a plugin is needed to do any of these, by all means recommend it and any associated tutorials; money is not an issue.
Here are a few sample frames taken that show each stage of the scene (it's the famous head-rising-from-water scene from Apoclaypse Now).
For the face to be superimposed, I will use a source image like these. The lighting is failry uniform, so these should be ripe images for shadow effects (I would like to cast a shadow over the right-hand portion of Connery's face, just as Martin Sheen's is in the movie):
When generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
When I create a grid from our OSIP DEM files the contours come in as a block. I usually do 1' and 5' contours. I would like to break these so that when I select a 1' contour it will show up individually with elevation data still attached. If you select one now, it selects the entire grid. If you explode it, you lose the grid file. Is there a way to do this or will a just have to label the contours so I know where I am at?
View 8 Replies View RelatedI am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
I have a client that just started using C3D 2010. When I sent him a topographic survey with contour lines (I am also using C3D 2010) he called me and asked if there was a way to select an individual contour line and have it display the elevation in the 'properties' dialog box. I have not been able to find an answer for him.
View 9 Replies View RelatedHow to label all the contour at one go.
View 2 Replies View RelatedIs there a way to quckly join contour lines that have been broken where the contour elevation is?
example, if this were a contour line ---------501---------
I'd want to delete the contour elevation and join the line to make a continuous contour line.....
I have a drawing set to UTM83 Zone 14 Meters and my drawing units is set to meters also. I created my surface from my point cloud. When i do the contour extract feature (surface object extract), the contours elevation is in the wrong datum or elevation? The surface contour is 620 but the same extracted contour says 188.97? Curious why this happens. It seems to me that it is back calculate elevation or datum to a different coodinate system.
View 7 Replies View RelatedIm working with 2013 Civil 3D. I have a site with polyline contours that have assigned elevations. I created my surface from the contours but when i try to label them with elevations, nothing. I label them by contour-mulitple with interval. All that is inserted are tic marks at the designated interval.
View 8 Replies View Relatedhow does one go about truncating surface contour elevation labels so they only show up to the tens place on the left side of the decimal (i.e. 50.25 instead of 5150.25)? I tried changing the rounding option under the style edit to "truncate" but that did not appear to change anything...?
View 6 Replies View RelatedWe recently received a LiDAR data in the form of an .asc file. Brought it fine into Civil 3d.
However, the level data is in mm so levels are showing as 98450 instead of 98.45. The level ranges from 98450 to 166260.
When I create a surface and set the style to show contours, it only displays contour lines below 100,000. Is this a limit in Civil 3D or am I missing some setting somewhere? I'm using the UKIE template btw.
I’m having some issues with my CAD. Every now and then, my contour lines disappear and I can’t get them to reappear. My surface border and triangles will appear but not the contours. Sometimes if I change surface styles they will appear but other times they are gone forever.
Troubleshooting: Regen AllAuditPurgeLayers on/offLayers frozen/thawedPromoting (if the surface is a data short cut)Changing the surface styleChanging the contour interval
None of this has worked…
AUTOCAD Civil 3D 2013
Windows 7
Processor: Intel (R) Xeon (R) CPU W3565 @ 3.20GHz
Installed Memory (RAM): 12.0GB
System Type: 64-bit
I have a contour label style that is using metric units instead of imperial. Where in the style or defaults is this controlled? Also, is there a way to tell what the units are from the contents? <[Surface Elevation(Um|P3|RN|Sn|OF|AP|GC|UN)]>
View 9 Replies View RelatedIt must be the medication, but I just can't remember something I learned in the last couple weeks regarding contour label intervals. I've been using C3d 2013 for about a year now and had used LDD 2004 until the upgrade. I've become pretty comfortable with the styles based implementation now.
What exactly controls the numeric value shown in a contour label? I've got them looking fine on my site. I imported my styles and settings to a coworkers site but for the life of me I cannot remember what I had to change to get the contour labels to show increments of 1 foot (they were showing fractions of a foot)… Typing the word "fractions" triggered my recall. The problem and solution was in the drawing units.(Inches vs feet).
How much time I spent looking through the style settings in search of the one setting I was missing... both times! One of the best ways to push things from short term memory into long term memory is "Increased active practice".
One thing I learned this time: The style settings are not always the source of the problem. It could be something very basic. It may save time to check the basics first.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
I would like to make a thesis about software civil 3d, the concept of how to make contour, if the result is close to the original surface these results affect the accuracy of the data because in indonesia does not yet exist that discuss this. How to make contour 3d civil concept?
View 1 Replies View RelatedI have been creating contour surface labels, which utilize a 3-point contour label line with grips to adjust, and this is my question:
when i create a single contour label, clicking specifically on a contour i want labeled, the contour label line with the 3-grips extends beyond several contours and thus places a label at every contour it touches. i can manually fix this by shorting the line, but this seems very inefficient.
1. is there a setting to have the label only placed on the center grip of the three?
I have my existing surface data referenced into my production drawing. I am trying to label the existing surface contour lines in the production drawing. I only have one surface in this drawing right now, so, I don't believe this is a multiple surface issue.
When I try to add single and multiple contour labels to the existing surface, I cannot select a contour line. I try to click on a contour line, using osnap, and I just keep getting prompted to pick a contour line.
I have a drawing containing a surface with contour labels. There are two tabs representing two separate drawings. On one of the drawings I want to change the viewport color of some of the layers so certain features will plot lighter than on the other drawing.
When I change the color of a layer within the viewport, however, the masking on all the contour labels takes on a color (not associated with the color of the layer they're on, or anything else for that matter). Once the masking takes on the color, you can't undo it. You have to exit the drawing without saving it and call it up again in order to have the labels appear properly.
I have two contour label styles (major and minor) both separate layers. When I bring in a label style (single) for those layers it puts those labels on layer 0. How do I stop this. I wish to have these labels placed onto the layers on which they are created.
View 2 Replies View Relatedi am creating contours in civil 3d, exporttoautocad2010, and there is this white box under the contour label, i don't want this, i DO want it to trim the contour to show the text better but NOT the white box.
View 6 Replies View RelatedWhere do I set the contour labeling line to not show or be on layer defpoints. When I click on the label line and right click I can edit the contour label line properties and change the Display contour label line to false but not sure where the style is.
View 9 Replies View RelatedI have no option to select my contour label style in my drawing all of a sudden. See attached dialog. They do exist in the settings but no option is available.
View 9 Replies View RelatedI created a corridor utilizing a profile, assembly and alignment. Worked well. I then created a surface from that corridor. The surface type should be displaying contours, but I do not see any. What am I doing wrong? The corridor display shows it covering the area that it should cover.
I did this once before and I had trouble with it that time as well. I remember the fix had something to do with adding code data from the corridor to the surface. I used a "+" button, but now have no idea where I did this at.
How to label the contour lines this way? I wanted to label the contours as shown in screenshot 1, but couldn’t know how to do that.
Which option should I choose to label the contours this way?
I am having problems viewing my contour lines after I create a surface. I create the surface using points. The contour lines will show up when I create the surface. After I close the program or the drawing, I am not able to see the contour lines again. The contour lines are on in the surface style. How can I see the contour lines without creating the surface again?
View 4 Replies View RelatedI have Civil3d2012 and have created a surface in one drawing and then referenced it to another. It appears to be working, but the contour labels will not work on the drawing where the surface is referenced. I have all the appropriate layers on.
View 1 Replies View RelatedI'd like to differentiate between proposed contours and existing contours on my plan views. Is there a way to show contours at a different thickness and/or color on one surface compared to another surface when both surfaces are displayed at the same time?
View 2 Replies View Related