I have a drawing containing a surface with contour labels. There are two tabs representing two separate drawings. On one of the drawings I want to change the viewport color of some of the layers so certain features will plot lighter than on the other drawing.
When I change the color of a layer within the viewport, however, the masking on all the contour labels takes on a color (not associated with the color of the layer they're on, or anything else for that matter). Once the masking takes on the color, you can't undo it. You have to exit the drawing without saving it and call it up again in order to have the labels appear properly.
i am trying to change my contour label precision from 700 to 700.50, i am working in a very flat area and i placed .25' and 1' contours on my site plan but can only get even foot labels to show. where do i change the precision, i tried in units, no luck.
When generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
Im working with 2013 Civil 3D. I have a site with polyline contours that have assigned elevations. I created my surface from the contours but when i try to label them with elevations, nothing. I label them by contour-mulitple with interval. All that is inserted are tic marks at the designated interval.
I have a contour label style that is using metric units instead of imperial. Where in the style or defaults is this controlled? Also, is there a way to tell what the units are from the contents? <[Surface Elevation(Um|P3|RN|Sn|OF|AP|GC|UN)]>
I have my existing surface data referenced into my production drawing. I am trying to label the existing surface contour lines in the production drawing. I only have one surface in this drawing right now, so, I don't believe this is a multiple surface issue.
When I try to add single and multiple contour labels to the existing surface, I cannot select a contour line. I try to click on a contour line, using osnap, and I just keep getting prompted to pick a contour line.
I have two contour label styles (major and minor) both separate layers. When I bring in a label style (single) for those layers it puts those labels on layer 0. How do I stop this. I wish to have these labels placed onto the layers on which they are created.
So I have an existing grade surface and I am laying out a number of different site designs. I've got all my surfaces from those site designs on different layers each displayed in a different layout. I need to label existing contours on each layout in different places. I've setup additional contour label styles (two for each design, major, and minor) and layers (two for each design, major, and minor). However, when I add labels to my existing surface, they come in on the right layer, but whenever I freeze any of the many layers my contour labels are on, they all turn off. The only workaround I can figure is to make copies of my existing surface for each design option and label each independantly. However, this is inacceptable as far as data management goes, since my one file will be hundreds of megs with all those surfaces.
Windows 7 x 64 bit NVidia Quadro 2000 Dual Monitor 6.00 GB RAM Intel Xeon W3550 @ 3.07 GHz Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
I have a basemap with labeled contours and the text sizes I am using all look good both in model and paper space, but when I xref the same basemap into another drawing, the xref of the basemap looks good in model space but the size of the labels on the contours from the basemap in paper space look way to small..
2012. I have contours from a corridor merged into a full surface. I labeled the contours, then had to rebuild the corridor after the profile changed.
The contour labels all vanished and had to be redone. While surface contours work well for roadway corridors with few intersecting roads. I am not finding them to be useful for parking lots. I am thinking I will have to go back to the extract all contours from model and neaten them up for acceptable graphic presentation, then label them using the label line function and pray they don't change. i.e. old LDD work flow.
The automatic outside boundary also does not work well when updating parameters and rebuilding. The old fashioned LDD boundary from polyline seems to work better most of the time.
I am trying to make my contour labels visible, indepently of the Visible status of the contours in the surface style of the original surface that I am working on. I have to do this due the final topo looks strange in the borders so I am displaying another contours -that do not have elevation- and make look the drawing better. The problem is that if I turn off the Visible property of the contours, the labels turn off even that they were created in a different layer and attached to a label style with its own layer property.
just a general question regarding contour labelling. Does it refresh automatically after I modified the labelling setting? My experience is no. Here is what I did, given an existing surface. Go to Surfaces -> Add Surface Labels -> Contour-Multiple at Intervals, I gave a decent interval, labels the entire surface with a few runs. Later on I decided to say hide the contour label lines, so I would go to Settings ->right click on Surface->Contour Labelling Defaults->set Display Contour Label Line to False, click Apply. So this setting will affect all the contour labelling created thereafter, but does it change the contour labels that I already created? If not, how can I change those labels?
I have a drawing with two viewports. One needs to show topography. The other does not. When I freeze the surface layer in the second viewport, the contour lables leave behind a dash. It's on layer 0 so I can't VP freeze without losing other things.
Where do these dashes come from? They aren't a visible part of the contour label. They only show up when the surface is on a frozen layer. The only purpose they serve is to show where a contour label would be if the surface wasn't frozen.
How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
I am having difficulties with plotting labels on pdf. I am using 2011 map3d. I am struggling with labeling contours. Basically i have shape file which draws out isometrical lines, then i label contours, everything looks nice/works before plotting but when i plot it on pdf, it basically seems to do a selective plotting of contour labels (all the contours are plotted nicely). Some contour areas are covered nicely, some have only few left, but most parts have none.
My drawing is basically large tiff and shape file on top of it. Contour lines are covering slightly bigger area than the tiff file. contour labels that are actually plotted are mostly drawn on the bottom and left part of the drawing (plus they also seems to be somewhat following the vertical measurements, as if they are only drawn to a certain height or so), mostly out of the tiff part, but also partially continue on top of tiff, until are not plotted anymore. When i want to view contour labels on the whole drawing area, i basically have to "dr" tiff to back, altough drawing order is set so that tiff is drawn first and then other are placed. Sometimes it just boggles my mind why CAD acts like this. If it wouldnt draw any contour labels, i would understand, but it basically does it partially/regionally somehow and even then there are those regions, where labels are drawn only partially, but are still drawn.
It has got to be something to do with the size of the labels compared to the screen. At the moment size context is set to "map space" and when i look at the drawing in model, i can see all the labels nicely (they are drawn in absolute units and are not relative to screen). When i look at it in the layout (layout scale is set to 1 mm=1), i can only see lower part of the drawing covered in labels. As i increase the size units, it gradually draws labels to the upper northern part also.
I was suggested to export the contours and labels as a dwg,open it and then plot it, but what happens is that map3d seems to be able to export only 2000 items (labels). I am sure it would work, if i somehow could manage to export all the contour labels. I am going to add a picture also just to give a better understanding of the problem. Polyline marks the tiff image location and basically the black dots are the labels that are being plotted.
The thing is, that it actually copies exactly 2000 labels into text, which seems to be corresponding to the "rasterthreshold" command limit of 2000, is it just a coincidence?
I have a feature line that is perpendicular to another and connected to it at a PI .When I modify the elevations of one of the feature lines, the labels for slope and PI elevation of the dependent feature line do not react and update without having to invoke a REGEN.
I have an alignment and have station labels. The alignment is labeled with "Major Stations" at every 100 feet. I need to change the station increment to 25 feet and have labels. I have done this although station 1+25 is still reading 1, station 1+50 is reading 1, etc. There is a precision variable somewhere, and I can't figure it out. I have played with the alignment labels style but no luck. Is there a global drawing settings somewhere that might be controlling this?
how to change the style of the tick symbol for the cut/fill labels? In the attached you can see its a good size circle and I want to change it to just a small cross. I dont see that setting in the label style anywhere.
Is there a way to change the marker style on general note labels that are already in the drawing without having to select them all and change it in the properties? I want to change the marker style from "basic" to "none" on the note labels but I'm not seeing a ToolSpace setting to change them all at the same time without having to individually change it...
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
When I create a grid from our OSIP DEM files the contours come in as a block. I usually do 1' and 5' contours. I would like to break these so that when I select a 1' contour it will show up individually with elevation data still attached. If you select one now, it selects the entire grid. If you explode it, you lose the grid file. Is there a way to do this or will a just have to label the contours so I know where I am at?
I have a client that just started using C3D 2010. When I sent him a topographic survey with contour lines (I am also using C3D 2010) he called me and asked if there was a way to select an individual contour line and have it display the elevation in the 'properties' dialog box. I have not been able to find an answer for him.