AutoCAD Civil 3D :: Possible To Change Line Space Factors For Labels?
Nov 5, 2008I want to be able to change the line space factor for a label similar to MTEXT. Is this possible?
View 5 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Feature Line Labels Not Updating With Last Change
Nov 9, 2012I have a feature line that is perpendicular to another and connected to it at a PI .When I modify the elevations of one of the feature lines, the labels for slope and PI elevation of the dependent feature line do not react and update without having to invoke a REGEN.
View 9 Replies View RelatedAutoCAD Civil 3D :: Station Labels Not Annotated In Paper Space?
Mar 28, 2012I am having a problem where my station labels are the correct size in model space, but when I switch to paper space they stay really small. I think it is a mm/m problem but can't seem to find a solution in the properties of the station label group. If I type a piece of mtext it works fine.
View 4 Replies View RelatedAutoCAD Civil 3D :: Putting Alignment Labels In Paper Space (layout)
Feb 26, 2013I have a number of problems with alignment labels showing up in layouts that I don't want to show or want to show up differently,. Is there any way to label an alignment in paper space (layout)? (or any other type of label).
View 3 Replies View RelatedAutoCAD Civil 3D :: Paper Space Labels - Text Enlarged In Plot Preview
Dec 24, 2013I'm having trouble with paper space labels. When i zoom in and out to adjust my viewport, the scale looks fine. Then when i go to plot preview all text are enlarged. Then when I cancel I go to paperspace and labels remain large.
View 9 Replies View RelatedAutoCAD Civil 3D :: Contour Line Labels
Jan 23, 2013I have my existing surface data referenced into my production drawing. I am trying to label the existing surface contour lines in the production drawing. I only have one surface in this drawing right now, so, I don't believe this is a multiple surface issue.
When I try to add single and multiple contour labels to the existing surface, I cannot select a contour line. I try to click on a contour line, using osnap, and I just keep getting prompted to pick a contour line.
AutoCAD Civil 3D :: Contour Labels Have A Perp Line Going Through It
May 13, 2013When I label my Contour lines there is a blue line(perp) running right thru the middle of it.
I have looked to take it off but can not find it.
AutoCAD Civil 3D :: Line And Curve Labels And Tables
Jun 22, 2012I am doing a project and I have a lot of feature lines. I will need to be able to lable these feature lines with tags and then create tables for those. My question is, is there an easy format that I can do that will lable these lines in an order I set it up? Right now it just lables all over the place. The lines are counting the curves too. For example: L1 L2 L3 C1 L5 L6 C2 L8. I can make it work, would just think there is a better way. BTW I am using Civil 3D 2011.
View 1 Replies View RelatedAutoCAD Civil 3D :: Line Labels To Span Segments?
Mar 26, 2013In trying to learn more about label styles, the C3D Help instructs one to:
2. On the Layout tab of the Label Style Composer, select or create the label component that you want to span multiple segments.
3. In the Properties list, under General, change the Span Outside Segments property to True.Specify this setting for each component that you want to span multiple segments.
There is no "Span Outside Segments" to set to True in my Label Style Composer. The only T/F option under General is for visibility.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
AutoCAD Civil 3D :: Line / Curve Labels Button
Jan 24, 2013Im trying to access the line labeling via the lines/curves menu heading on the main menu bar but i dont have the Lines/Curves drop down button. Is there a command i can enter to show this menu bar?
View 1 Replies View RelatedAutoCAD Civil 3D :: Grips For Labels For Line And Curve Does Not Use Z Changes?
Aug 28, 2013I'm using label for line & curve.
I have discovered that the points from it is created are fixed in Z value.
You can use the grips with object snap , you can move the grips but the Z values are preserved......
it should be to get the Z value of X,Y,Z given by object snap , isn't it ?
AutoCAD Civil 3D :: Line Labels To Span Segments?
Apr 3, 2013Mastering C3D - the bit about spanning segments on an exterior line crossing several parcels. It works like the book shows except the crow's feet only appear at the start and end of the parcel's segment that I click on to insert the label, instead of the start and end of the whole segment. The distance the label reports is correct.
The crows feet are blocks inserted at the start and end of the direction arrow component (visibility false) in the author's style? I have turned the arrow's visibility on and can see that the arrow does not span the parcels.
I have another drawing in a later chapter on alignments that has the same spanning label style that works and I can't for the life of me discover the difference between the two.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
AutoCAD Civil 3D :: Rotate Line And Curve Labels
Sep 17, 2010We would like to be able to rotate line and curve labels in Civil 3D 2010.
Some of our drawings get really crowded and we need to slightly rotate the line or curve labels. This is fine with regular autocad text, but how can we accomplish this with styles and dynamic line/curve labels? I can't seem to find a way to do this with the grips and setting up new styles with specified rotations isn't an option because we need to be able to fine tune and eyeball the rotation of the label to make it look right.
C3D 2012 SP1
Win 7 64 Enterprise
Intel Xeon 3.07 Ghz 8GB Ram
NVIDIA Quadro 4000
AutoCAD Civil 3D :: Delete All Labels On Feature Line
Jan 31, 2013How to delete all labels on a feature line? Ideally if we could just pick the line and have it's labels deleted. QSelect and Select Similar require too much interaction to be convenient.
View 9 Replies View RelatedAutoCAD Civil 3D :: Line Label Macro For Multiple Labels
Apr 12, 2013Is there a way to create a macro to label a line with a particular style?
I label my feature lines with three styles: multiple - segment grade, multiple - segment start elevation & single - segment end elevation. I want to make a macro for each of these that I can put on a button. It would be nice to combine the two multiples too if that is possible.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
AutoCAD Civil 3D :: Different Cut / Fill Factors Along Same Alignment?
May 30, 2012How to apply a different set of fill factors along the same alignment in the same material list? I have a road that is going to be sandy soil for the first half and half rock for the last half.
View 1 Replies View RelatedAutoCAD Civil 3D :: Contour Labels Change
Jun 26, 2012I have a drawing containing a surface with contour labels. There are two tabs representing two separate drawings. On one of the drawings I want to change the viewport color of some of the layers so certain features will plot lighter than on the other drawing.
When I change the color of a layer within the viewport, however, the masking on all the contour labels takes on a color (not associated with the color of the layer they're on, or anything else for that matter). Once the masking takes on the color, you can't undo it. You have to exit the drawing without saving it and call it up again in order to have the labels appear properly.
AutoCAD Civil 3D :: Background Masks For Line Labels / How To Make Them Visible
Apr 13, 2012I have some Line Labels that got exploded, and they contained Background Masks.
When I make a plot, the mask plots a dark rectangle.
How can I make the masks visible so that they can be erased? Is there a variable for that? What type of entity (name?)are they?
When I make "wipeouts" visible, you still can not see the masks.
C3d 2010 (no SP)
Win7
AutoCAD Civil 3D :: How To Choose No Color For Line Extending Between Contours Labels
Mar 15, 2012How to choose “no color” for the line extending between the contours labels?
I labeled the contour lines but sounds that it draws a line between them. Is there a way to hide this line to give it “no color” to have a better presentation for the entire map?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Civil 3D :: Adjust Line Spacing In Network Structure Labels
Mar 1, 2013I have questions in 2012 pipe network labels.
We are having problems with running out of space and would like to squeeze the line spacing between lines to get more room. We know how to do that in standard MTEXT but can't find the equivalent in the label settings.
I have also noticed problems getting dragged pipe labels to stack. I check the box to stack on drag, but it doesn't seem to do it. We created a separate stacked label style.
AutoCAD Civil 3D :: Match Line Labels Constantly Reset To The Left And Right?
Jan 10, 2014I've got a project where the match line labels constantly reset to the left and right of the match line itself even though I've set it to be middle. I didn't have this problem with 2013 or earlier, so is it a possible bug?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
AutoCAD Civil 3D :: How To Change Contour Labels Precision
Oct 25, 2010i am trying to change my contour label precision from 700 to 700.50, i am working in a very flat area and i placed .25' and 1' contours on my site plan but can only get even foot labels to show. where do i change the precision, i tried in units, no luck.
View 9 Replies View RelatedAutoCAD Civil 3D :: Add Elevation Labels At Any Position On A Feature Line Without Having To Create A Surface?
Oct 31, 2011Is there a way to add elevation labels at any position on a feature line without having to create a surface?
View 9 Replies View RelatedAutoCad :: How To Change Model / Paper Space Line Thickness
Nov 1, 2006How I would change both the model and paper space thickness of a line in AutoCAD 2004? I've tried changing "line thickness" and "line weight" in the properties dialog box but it doesn't seem to matter whether it's 0 or 9,999,999 or any number, it just looks the same, in both the model space and paper space views.
I have a drawing someone else did that uses polylines of different thickness so I have tried to figure out how they did it. Again, looking at the properties dialog box it seems to make no difference what I set the "line thickness" or "line weight" properties to...the line just stays the same size regardless.
I want to change line thicknesses because I'm designing a surface water pipe layout...I want the pipes to be a lot thicker than the lines that represent the actual building so that they will stand out when I plot the drawing.
AutoCAD Civil 3D :: How To Change The Precision For The Bearing And Distance Labels
May 10, 2012How do you change the precision for the bearing and distance labels in 2012
View 2 Replies View RelatedAutoCAD Civil 3D :: Change Station Increment To 25 Feet And Have Labels
Nov 12, 2013I have an alignment and have station labels. The alignment is labeled with "Major Stations" at every 100 feet. I need to change the station increment to 25 feet and have labels. I have done this although station 1+25 is still reading 1, station 1+50 is reading 1, etc. There is a precision variable somewhere, and I can't figure it out. I have played with the alignment labels style but no luck. Is there a global drawing settings somewhere that might be controlling this?
View 2 Replies View RelatedAutoCAD Civil 3D :: Modify Leader For Station And Offset Labels To Underline Top Line Of Text
Dec 10, 2012How do I modify the leader for station and offset labels to underline the top line of text?
View 3 Replies View RelatedAutoCAD Civil 3D :: Change Style Of Tick Symbol For Cut / Fill Labels?
Aug 2, 2013how to change the style of the tick symbol for the cut/fill labels? In the attached you can see its a good size circle and I want to change it to just a small cross. I dont see that setting in the label style anywhere.
View 2 Replies View RelatedAutoCAD Civil 3D :: Change Position Of Elevation Labels On Horizontal Axis
May 21, 2012Trying to change the position of the "elevation" labels on the horizontal axis. They come default as being inside the profile and i want them shown on the outside of the profile box.
View 3 Replies View RelatedAutoCAD Civil 3D :: Change Marker Style On General Note Labels
Feb 24, 2012Is there a way to change the marker style on general note labels that are already in the drawing without having to select them all and change it in the properties? I want to change the marker style from "basic" to "none" on the note labels but I'm not seeing a ToolSpace setting to change them all at the same time without having to individually change it...
View 8 Replies View RelatedAutoCAD Civil 3D :: Line Weight In Paper Space
Apr 28, 2011We have a few drawings where the line weights between paper space and model space vary on plots.i.e a line on Layer 1 in model space plots heavier/darker than a line on Layer 1 in paper space.
View 8 Replies View Related