How to delete all labels on a feature line? Ideally if we could just pick the line and have it's labels deleted. QSelect and Select Similar require too much interaction to be convenient.
View 9 RepliesI have a feature line that is perpendicular to another and connected to it at a PI .When I modify the elevations of one of the feature lines, the labels for slope and PI elevation of the dependent feature line do not react and update without having to invoke a REGEN.
View 9 Replies View RelatedIs there a way to add elevation labels at any position on a feature line without having to create a surface?
View 9 Replies View RelatedI have a rogue feature line that I do not know where or why it appeared from. (Somehow it is a duplicate of my curb line, but offset.)I cannot delete this feature line. It is not applied to any surface as a break line, but when I go to delete it, it freezes autocad.
I have done all the basic steps of purging, audit, recovering, even tried mapclean and I still cannot delete it.
Or maybe I have to delete it individually ? Is not an option to "delete alignment labels".
View 9 Replies View RelatedC3D2011
Say you have a feature line in plan view and you project it to profile view. Is there a way to label the true slope of the projected feature line segments in profile?
The profile view depth labels are not accurate since it's simply calculating the length from station to station in profile.
...and of course this does not correspond to the true segment length since the feature line is not parallel to the alignment.
I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
I have my existing surface data referenced into my production drawing. I am trying to label the existing surface contour lines in the production drawing. I only have one surface in this drawing right now, so, I don't believe this is a multiple surface issue.
When I try to add single and multiple contour labels to the existing surface, I cannot select a contour line. I try to click on a contour line, using osnap, and I just keep getting prompted to pick a contour line.
When I label my Contour lines there is a blue line(perp) running right thru the middle of it.
I have looked to take it off but can not find it.
I am doing a project and I have a lot of feature lines. I will need to be able to lable these feature lines with tags and then create tables for those. My question is, is there an easy format that I can do that will lable these lines in an order I set it up? Right now it just lables all over the place. The lines are counting the curves too. For example: L1 L2 L3 C1 L5 L6 C2 L8. I can make it work, would just think there is a better way. BTW I am using Civil 3D 2011.
View 1 Replies View RelatedIn trying to learn more about label styles, the C3D Help instructs one to:
2. On the Layout tab of the Label Style Composer, select or create the label component that you want to span multiple segments.
3. In the Properties list, under General, change the Span Outside Segments property to True.Specify this setting for each component that you want to span multiple segments.
There is no "Span Outside Segments" to set to True in my Label Style Composer. The only T/F option under General is for visibility.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
Im trying to access the line labeling via the lines/curves menu heading on the main menu bar but i dont have the Lines/Curves drop down button. Is there a command i can enter to show this menu bar?
View 1 Replies View RelatedI'm using label for line & curve.
I have discovered that the points from it is created are fixed in Z value.
You can use the grips with object snap , you can move the grips but the Z values are preserved......
it should be to get the Z value of X,Y,Z given by object snap , isn't it ?
Mastering C3D - the bit about spanning segments on an exterior line crossing several parcels. It works like the book shows except the crow's feet only appear at the start and end of the parcel's segment that I click on to insert the label, instead of the start and end of the whole segment. The distance the label reports is correct.
The crows feet are blocks inserted at the start and end of the direction arrow component (visibility false) in the author's style? I have turned the arrow's visibility on and can see that the arrow does not span the parcels.
I have another drawing in a later chapter on alignments that has the same spanning label style that works and I can't for the life of me discover the difference between the two.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
We would like to be able to rotate line and curve labels in Civil 3D 2010.
Some of our drawings get really crowded and we need to slightly rotate the line or curve labels. This is fine with regular autocad text, but how can we accomplish this with styles and dynamic line/curve labels? I can't seem to find a way to do this with the grips and setting up new styles with specified rotations isn't an option because we need to be able to fine tune and eyeball the rotation of the label to make it look right.
C3D 2012 SP1
Win 7 64 Enterprise
Intel Xeon 3.07 Ghz 8GB Ram
NVIDIA Quadro 4000
Is there a way to create a macro to label a line with a particular style?
I label my feature lines with three styles: multiple - segment grade, multiple - segment start elevation & single - segment end elevation. I want to make a macro for each of these that I can put on a button. It would be nice to combine the two multiples too if that is possible.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
I want to be able to change the line space factor for a label similar to MTEXT. Is this possible?
View 5 Replies View RelatedIs there any way to project feature lines into a profile when the plan view is xref'd? I have my plan view "existing topo" with all existing features/Figures and a existing surface.
My profile is a separate dwg with plan view xref'd and surface a data shortcut. Of course there are feature lines and Survey Figures in the existing top I want to project into the profile, but can't because it is an xref. Besides copying .
C3D 2012. I am trying to get the distance from the start of a featrue line to a selected point. My object is "FLobj" and my Point is PT1. I am using the method Get2dDistanceAtPoint. This is the line of code.
(vlax-invoke-method FLObj 'Get2DDistanceAtPoint pt1 'pDistance)
I keep getting "too many actual parameters".
I am wanting to add the name of my feature line to a label style. I am trying to create a label style that will show Lot Number and Area. I know i can create parcels, but i dont want to! I have also created a map table that can do exactly what i want on polylines, but will not work on an xref. Labelling featurelines does work in xrefs.
how to add the name into a label style?
Is there a way to decurve feature lines like how we do it with polylines? I am labeling my feature lines but don't want the curve labels to show up
View 6 Replies View RelatedI am building a surface and have back of curb, curb face, and curb flowline going around a curve. I cannot create the lines with the usual pline as they will cross due to poor field collect. I created the curbs with multiple arcs. I was then going to change them into Feature Lines and am wondering if I can then use them as breaklines in a surface.
View 1 Replies View RelatedI have a roadway alignment with FG profile and I want to place a feature line on the roadway centerline that represents the FG profile elevations.
View 7 Replies View RelatedWe have cooridors with features such as terrace drains and flowlines, but we cant seem to get the linetypes to show up correctly. For example a flow line should have arrows but it shows up without the linetype and looks continuous.
LTSCALE =1
MSLTSCALE=1
PSTSCALE=1
DRAWING SETTINGS - 1"=40'
CIVIL 3D 2012
I am building a corridor with the right side of the pavement fitting to the existing surface.The subassembly used to link the edge of pavement to the existing ground is LinkSlopeToSurface.
On the corridor created, the feature line (code P2) of the corridor surface (top) starts from the station 0+025, instead of 0+000.
I was wondering why there is no feature line P2 for station range 0+000 to 0+025? Does that mean the linkage to the existing ground surface not exist for the slope defined in the subassembly?
We are running Civil3d 2012. When converting a line or 3d poly to feature line, or just creating one it adds elevation points where it crosses surface breaklines even if you do not assign elevations. We want the feature to just have 2 elevations. The beginning and end. Is this a bug? Or is there another setting somewhere?
View 7 Replies View RelatedI created a label for retaining wall that takes the z value from the start and end of a feature line. Works great except that it isn't dynamic. I have created the feature line in a grading sheet where the surface is data shortcut into it and I'm just using grips to make sure the ends are on the bottom and top of the retaining wall. Is there any way to dynamically pin/tie the feature line to a surface that has been data shortcut?
View 9 Replies View RelatedI have some Line Labels that got exploded, and they contained Background Masks.
When I make a plot, the mask plots a dark rectangle.
How can I make the masks visible so that they can be erased? Is there a variable for that? What type of entity (name?)are they?
When I make "wipeouts" visible, you still can not see the masks.
C3d 2010 (no SP)
Win7
How to choose “no color” for the line extending between the contours labels?
I labeled the contour lines but sounds that it draws a line between them. Is there a way to hide this line to give it “no color” to have a better presentation for the entire map?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have questions in 2012 pipe network labels.
We are having problems with running out of space and would like to squeeze the line spacing between lines to get more room. We know how to do that in standard MTEXT but can't find the equivalent in the label settings.
I have also noticed problems getting dragged pipe labels to stack. I check the box to stack on drag, but it doesn't seem to do it. We created a separate stacked label style.
I've got a project where the match line labels constantly reset to the left and right of the match line itself even though I've set it to be middle. I didn't have this problem with 2013 or earlier, so is it a possible bug?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM