AutoCAD Civil 3D :: Contour Labels Vanish On Rebuild
Apr 9, 2013
2012. I have contours from a corridor merged into a full surface. I labeled the contours, then had to rebuild the corridor after the profile changed.
The contour labels all vanished and had to be redone. While surface contours work well for roadway corridors with few intersecting roads. I am not finding them to be useful for parking lots. I am thinking I will have to go back to the extract all contours from model and neaten them up for acceptable graphic presentation, then label them using the label line function and pray they don't change. i.e. old LDD work flow.
The automatic outside boundary also does not work well when updating parameters and rebuilding. The old fashioned LDD boundary from polyline seems to work better most of the time.
View 1 Replies
ADVERTISEMENT
Sep 20, 2011
When generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
View 4 Replies
View Related
Dec 16, 2013
I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
View 9 Replies
View Related
Dec 20, 2012
Im working with 2013 Civil 3D. I have a site with polyline contours that have assigned elevations. I created my surface from the contours but when i try to label them with elevations, nothing. I label them by contour-mulitple with interval. All that is inserted are tic marks at the designated interval.
View 8 Replies
View Related
Feb 15, 2012
I have a contour label style that is using metric units instead of imperial. Where in the style or defaults is this controlled? Also, is there a way to tell what the units are from the contents? <[Surface Elevation(Um|P3|RN|Sn|OF|AP|GC|UN)]>
View 9 Replies
View Related
Jan 23, 2013
I have my existing surface data referenced into my production drawing. I am trying to label the existing surface contour lines in the production drawing. I only have one surface in this drawing right now, so, I don't believe this is a multiple surface issue.
When I try to add single and multiple contour labels to the existing surface, I cannot select a contour line. I try to click on a contour line, using osnap, and I just keep getting prompted to pick a contour line.
View 9 Replies
View Related
Jun 26, 2012
I have a drawing containing a surface with contour labels. There are two tabs representing two separate drawings. On one of the drawings I want to change the viewport color of some of the layers so certain features will plot lighter than on the other drawing.
When I change the color of a layer within the viewport, however, the masking on all the contour labels takes on a color (not associated with the color of the layer they're on, or anything else for that matter). Once the masking takes on the color, you can't undo it. You have to exit the drawing without saving it and call it up again in order to have the labels appear properly.
View 4 Replies
View Related
Oct 15, 2012
I have two contour label styles (major and minor) both separate layers. When I bring in a label style (single) for those layers it puts those labels on layer 0. How do I stop this. I wish to have these labels placed onto the layers on which they are created.
View 2 Replies
View Related
May 13, 2013
When I label my Contour lines there is a blue line(perp) running right thru the middle of it.
I have looked to take it off but can not find it.
View 5 Replies
View Related
Mar 29, 2012
So I have an existing grade surface and I am laying out a number of different site designs. I've got all my surfaces from those site designs on different layers each displayed in a different layout. I need to label existing contours on each layout in different places. I've setup additional contour label styles (two for each design, major, and minor) and layers (two for each design, major, and minor). However, when I add labels to my existing surface, they come in on the right layer, but whenever I freeze any of the many layers my contour labels are on, they all turn off. The only workaround I can figure is to make copies of my existing surface for each design option and label each independantly. However, this is inacceptable as far as data management goes, since my one file will be hundreds of megs with all those surfaces.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 8 Replies
View Related
Jul 19, 2013
I have a basemap with labeled contours and the text sizes I am using all look good both in model and paper space, but when I xref the same basemap into another drawing, the xref of the basemap looks good in model space but the size of the labels on the contours from the basemap in paper space look way to small..
View 4 Replies
View Related
Mar 11, 2013
I have a topo drawing containing contours which are labeled with elevation.
I Xref'd this drawing into another drawing and the contour labels do not show up, so i have to re-create the contour labels.
Is there a way for the labels to show up automatically when XREF'd?
View 9 Replies
View Related
Oct 25, 2010
i am trying to change my contour label precision from 700 to 700.50, i am working in a very flat area and i placed .25' and 1' contours on my site plan but can only get even foot labels to show. where do i change the precision, i tried in units, no luck.
View 9 Replies
View Related
Jan 7, 2013
I am trying to make my contour labels visible, indepently of the Visible status of the contours in the surface style of the original surface that I am working on. I have to do this due the final topo looks strange in the borders so I am displaying another contours -that do not have elevation- and make look the drawing better. The problem is that if I turn off the Visible property of the contours, the labels turn off even that they were created in a different layer and attached to a label style with its own layer property.
View 6 Replies
View Related
Mar 11, 2013
just a general question regarding contour labelling. Does it refresh automatically after I modified the labelling setting? My experience is no. Here is what I did, given an existing surface. Go to Surfaces -> Add Surface Labels -> Contour-Multiple at Intervals, I gave a decent interval, labels the entire surface with a few runs. Later on I decided to say hide the contour label lines, so I would go to Settings ->right click on Surface->Contour Labelling Defaults->set Display Contour Label Line to False, click Apply. So this setting will affect all the contour labelling created thereafter, but does it change the contour labels that I already created? If not, how can I change those labels?
View 3 Replies
View Related
Aug 1, 2013
I have a drawing with two viewports. One needs to show topography. The other does not. When I freeze the surface layer in the second viewport, the contour lables leave behind a dash. It's on layer 0 so I can't VP freeze without losing other things.
Where do these dashes come from? They aren't a visible part of the contour label. They only show up when the surface is on a frozen layer. The only purpose they serve is to show where a contour label would be if the surface wasn't frozen.
View 6 Replies
View Related
Aug 21, 2012
How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
View 4 Replies
View Related
Nov 21, 2011
I am having difficulties with plotting labels on pdf. I am using 2011 map3d. I am struggling with labeling contours. Basically i have shape file which draws out isometrical lines, then i label contours, everything looks nice/works before plotting but when i plot it on pdf, it basically seems to do a selective plotting of contour labels (all the contours are plotted nicely). Some contour areas are covered nicely, some have only few left, but most parts have none.
My drawing is basically large tiff and shape file on top of it. Contour lines are covering slightly bigger area than the tiff file. contour labels that are actually plotted are mostly drawn on the bottom and left part of the drawing (plus they also seems to be somewhat following the vertical measurements, as if they are only drawn to a certain height or so), mostly out of the tiff part, but also partially continue on top of tiff, until are not plotted anymore. When i want to view contour labels on the whole drawing area, i basically have to "dr" tiff to back, altough drawing order is set so that tiff is drawn first and then other are placed. Sometimes it just boggles my mind why CAD acts like this. If it wouldnt draw any contour labels, i would understand, but it basically does it partially/regionally somehow and even then there are those regions, where labels are drawn only partially, but are still drawn.
It has got to be something to do with the size of the labels compared to the screen. At the moment size context is set to "map space" and when i look at the drawing in model, i can see all the labels nicely (they are drawn in absolute units and are not relative to screen). When i look at it in the layout (layout scale is set to 1 mm=1), i can only see lower part of the drawing covered in labels. As i increase the size units, it gradually draws labels to the upper northern part also.
I was suggested to export the contours and labels as a dwg,open it and then plot it, but what happens is that map3d seems to be able to export only 2000 items (labels). I am sure it would work, if i somehow could manage to export all the contour labels. I am going to add a picture also just to give a better understanding of the problem. Polyline marks the tiff image location and basically the black dots are the labels that are being plotted.
The thing is, that it actually copies exactly 2000 labels into text, which seems to be corresponding to the "rasterthreshold" command limit of 2000, is it just a coincidence?
View 3 Replies
View Related
Aug 4, 2013
I had a corridor built with a CulDeSac on a side access road. Problem I was running into was the daylighting from the assembly on curve so I finally decided that I needed to move the CulDeSac 20 feet further down the road. I deleted the CulDeSac region and when I did that the Final Grade for the EOPs profiles were deleted with it. I then moved the EOP alignments (Left & Right side) 20 feet further down the road and readjusted the start and ending of the alignments. Then went back to the existing grade profiles of the EOP alignments and redrew in the Final Grade profiles. I added back in the Regions for each Baseline and set the targets to Road CL Alignment and Final Grade Profile. These are the exact same steps I took originally to build the CulDeSac the first time and it worked great. Now it won't even build the CulDeSac.
When I deleted the region the FG of the EOP disappeared, but actually still showed in the Toolspace so the new FG profiles with same name were seconds/duplicates. Once I saw that I deleted the originals from Toospace and renamed the duplicates and used them for the Baselines.
Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013
View 9 Replies
View Related
Dec 19, 2012
I would like to add a Rebuild Surface command to my Ribbon Modify Panel. I would also like to have it included in my Right Click menu after a surface is selected. There doesn't appear to be any way to initiate a surface rebuild from the command line and I don't find a command for it in the CUI editor.
There does seem to be a rebuild command in the API but I am not a programmer. Is this possible without programming?
View 4 Replies
View Related
Aug 3, 2012
I can stumble a bit, and have reasonably competent in the ACAD side of it. but here's my issue: existing grade was created in a separate office (by a non-c3d guru) and the surface drawing was shipped up to the remote office. There's nothing in the drawing except the surface (created from GIS contours) and the contour labels. Layers for major and minor and labels are all on, not frozen, visible, and none are set to non-plot. (C-TOPO-MAJR, C-TOPO-MINR, C-TINN, C-TOPO-TEXT)
This file is XREFed into modelspace in a sheet file that has a half-dozen tabs, two to three vports per tab. In some of the viewports, not all by any means, either none of the contour lines show up, or only some of them do. There are no per-viewport over-rides, and all layers are on, thawed, and plottable. In the area where the contour lines fail to show up, the contour labels do.
View 3 Replies
View Related
Apr 5, 2012
I have 5 intersections in a drawing and i try to update all the intersections regions one after the other with "Update Regions and Rebuild Corridor". The problem is that sending up to date some intersections send other intersections (previously updated) out of date. So i cannot have all my intersections updated. The only way i found to correct this is to "Update regions automatically". but this way i cannot make changes to regions manually.
View 3 Replies
View Related
Oct 23, 2013
How can you force the rebuild of a corridor in C3D 2014 even if the corridor thinks it is up to date? (no yellow exclamation shield icon).
We have .NET subassemblies that react to changes in the location of objects in XRef'd files.
In C3D 2012 when we changed the XRef'd objects position, we would right click the corridor and select rebuild and the subassemblies would rerun (no matter what).
In C3D 2014 if you select rebuild, the corridor does nothing if it thinks nothing has changed.
View 5 Replies
View Related
May 11, 2013
I have some code that edits the breaklines of a surface. Everything works correctly, except for the surface rebuild when finished.At the end of the command I use:
surf.Rebuild();
But when the command completes I still need to manually rebuild the surface to see the result of my command's edits. This is in both 2013 & 2014. I shouldn't need to do this and was just wondering why the Rebuild() method doesn't always work.
Also, is it possible to toggle the Automatic Rebuild option for surfaces in code?
View 8 Replies
View Related
Dec 27, 2013
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
View 2 Replies
View Related
May 3, 2013
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
View 9 Replies
View Related
Mar 24, 2013
How to convert a 3D Polyline contour to Polyline contour.
View 4 Replies
View Related
Jul 10, 2012
I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
View 1 Replies
View Related
Nov 21, 2013
When I create a grid from our OSIP DEM files the contours come in as a block. I usually do 1' and 5' contours. I would like to break these so that when I select a 1' contour it will show up individually with elevation data still attached. If you select one now, it selects the entire grid. If you explode it, you lose the grid file. Is there a way to do this or will a just have to label the contours so I know where I am at?
View 8 Replies
View Related
Sep 15, 2012
I have a client that just started using C3D 2010. When I sent him a topographic survey with contour lines (I am also using C3D 2010) he called me and asked if there was a way to select an individual contour line and have it display the elevation in the 'properties' dialog box. I have not been able to find an answer for him.
View 9 Replies
View Related
Jun 5, 2013
How to label all the contour at one go.
View 2 Replies
View Related
