I downloaded Revit 2013 and this is the first project I started working on. I rendered a few cameras and they turned out ok, but all of a sudden the rendered images turned out blue and yellow. I didn't make any changes in the materials or lighting, but they still turn out the same. I even tried rendering in another computer but nothing changed. I attached the image.
View 9 Replies
I am working on drawings in which some of the text is in yellow which is great on a black background. After printing the yellow becomes very hard to see on white paper. I know I know I could change the color of the layer before plotting but I was hoping for a seamless way of doing it. Is there a way to display colors in yellow and plot in blue similar to white/black?
View 2 Replies View RelatedI am having problems with my rendering, yesterday everything was working fine but today every time i set rendering quality higher than draft, Revit either fails to render (rendering area goes black) or the pc crashes and i get bluescreen.
View 6 Replies View RelatedIs there a plugin or something that will allow me to change all pixels that match a certain color value to another color value? So let's say I have a picture that has red, green and blue on it. And I want to change every pixel that is blue to yellow.
View 5 Replies View RelatedFor no apparent reason I am opening images where there would be a blue background, and getting blocks or streaks of black pixels. Using CS 5. How do I prevent or correct?
View 3 Replies View RelatedI have a frame created as a sweep in a door family - but for some reason it always shows in blue linework, even when not selected. If this is to highlight an error or other issue with the model ?
It seems to have appeared after I deleted the cut opening outline and replaced it with a couple of Void Extrusions (to allow me to control the wrap of the plaster finish and not have it impact on the structural opening size).
The frame does sit within an extrusion void, but it is not selected to cut it.
Blue sign at the center of columns,
I couldn’t know how to hide a blue sign created at the center of columns in my drawing!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I recently opened a project I worked on months ago and noticed certain materials in my rendered images had turned blue. I created a new rendering in which all materials came out great and I saved it. Minutes later I opened the new rendering and it too became blue. I worked on this project for months and have not made any changes to materials. All previously saved images in my file, the wall materials, stairs, and certain furniture have all turned blue.
View 6 Replies View RelatedI have an intel 3570k cpu and an nvidia gtx 670 gpu, and it only uses my gpu for the 3d clview, but when it renders photos, it only uses my cpu, which makes rendering take so much longer.
i5 3570k@4.4ghz gtx 670, 8gb ddr3 1600mhz
PC I am using Revit Architecture on is
Windows 7 Professional
Intel Core i7 3.4ghz
Ram 16gb
64-bit OS
When rendering a job the program stops responding. The task manager shows the cpu working hard but the memory is not being used at all. Windows reports failure to recover program and the application exits.
why my parking line don't show in the rendered site plan?
View 3 Replies View RelatedI am trying to render using the recessed can lights and they light my rendering but the lights themselves don't look line they are emitting light. It looks odd. I have the same problem with some of my 2x4 fixtures where light does show on the floor but the lights themselves don't seem to be on.
View 4 Replies View RelatedNone of my custom materials are rendering on the cloud. If I render it on REVIT, they come out just fine. Is there something that I need to do to get my materials to show up?
View 1 Replies View RelatedRendering at high quality, exterior sun only, 150 DPI and the image is about 9' tall x5' wide. Everything goes great until it hits 26%. Then the bar goes full on 100% but the image is only 26% rendered.
I have a 2gb video card, 4.1Ghz overclocked processor and about 8GB of RAM. Perhaps I havn't allocated enough memory to render an image of this size?
I'm new user of REVIT Architecture for approximately one month, and I am very disappointed about quality renderings.
I am looking for a realistic 3D rendering engine, which would be fairly simple to use because I do not want a complicated software such as 3DS MAX software.I would also like a software as compatible as possible with REVIT, ie that file sharing should be simple without having to recreate the materials and textures in the rendering software.I have heard the following software:
BLENDERVRAYMAXWELLLUMIONARTLANTISCan you give me your opinion on this software when compared to their QUALITY RENDERING / EASE OF USE ?
I have just loaded Revit 2014, and then loaded a project file created in Revit 2013. When I try to render a view in the cloud I get an error message that says "The file could not be translated.-1" I have tried this with several projects and get the same error for all.
However if i create a new project in 2014 the render works fine, it only seams to be a problem when I upgrade a project from revit 2012 or 2013.
I am using Revit 2013 and I am rendering in the Cloud and my renderings are not turning out as well as I want them to. I was wondering what the intial settings under the graphics should be? like what shadows I should use? how high the exposure should be? Even when I turn the sun completely off the sun still shows through the windows. My renderings are also showing up grainy.
View 1 Replies View Relatedwhy my interior rendering scenes just show up black. I have opened up projects from previous releases that I was able to get interior scenes to render correctly and they render fine in 2013. I've imported the modified fixtures to the current projects file and they still don't do anything. The scene I'm talking about has a ceiling modeled on the underside of a floor. I've read this may be an issue, but my light fixtures light source is to be 1/4" above the plane of the ceiling. In my case, it's a 5/8" layer of drywall.
View 9 Replies View RelatedA colleague of mine has rendered a panoramic image at Autodesk 360, but when he downloads the panorama, it is just a series of still images. Any program that will stitch these images back together so the panorama functionality can be maintained locally?
View 6 Replies View RelatedI'm trying to render a residential project, I can't seem to find shake and shingle siding materials ( cedar impression) . I need to start rendering this project as soon as possible.
View 3 Replies View RelatedWhenever i render my project it always comes in grey color after rendering.
View 4 Replies View RelatedI know you can change the color of a rendering background, use and image, change clouds etc but can you just turn the background OFF? I can't find where to do this in 2013
View 5 Replies View RelatedI have created a wall panel pattern on my wall surface using the pats and assembly tool. I drew out the pattern using the sketch line tool and I chose a joint condition in between the panels. The joint lines of the panels show up in my 3d model but when I render it the joints lines don't render. How can make my panel joint lines show up in my render?
View 1 Replies View RelatedI've created some generic walls and I wanted to overide the material but I can't find a way to do it. I thought I could do it in revit arch 2010 but using properties and edit type but I don't get the materials selection using revit arch 2011.
View 3 Replies View RelatedI`m trying to get a number the color "White" on top of a Blue color.I can get all colors to work except the color "White"...
View 8 Replies View RelatedWhen attempting to launch the Render in Cloud feature in Revit 2014, the following error message is displayed:
Render in Cloud
A Problem occurred.
The file could not be translated.-1
Recently we bought numbers of Revit Suite 2013 and expects the best performances from it. but, regretably speaking the rendering time is worst than before upgrading.In addition to that, we also upgraded our Workstation to 16 GB RAM and a QUADRO graphic engine, but it still take more than an hour to render one simple view.what could be the cause? i hope it is not the software that we bought( cost us thousands... ) here i post the rendering screen and the task performance while we are rendering,ASAP reply needed as all our REVIT workstations moving away from our deep expectation.
View 1 Replies View RelatedI have been trying to render my linked files in Cloud. For some reasons the linked files walls are misplaced in the drawing. Please take a look at the attached file.
What I have tried to do to resolve the problem and have not worked:
1.Reloded the links.
2.Created new camera views.
3.Tried to use RVT Link Display Settings and rendered with both 'by host view' and by 'linked view'
4.In proprties; tried to use the different Dicipline Settings.
5.Tried to use the different settings in Manage Links to either attachment/overlay under Reference Type or absolute/relative under Path Type.
I'm using Revit 2014.
I have created a shape which has a solid blue color.I then used the text tool and placed the number 6 in white color on top of the blue.My issue is the number is only visible when i place the cursor on it..it is like it is hiding behind the blue color.How to have the white number 6 visible on top of the blue color?
View 2 Replies View RelatedI started rendering using 360 cloud a few weeks ago. I've done lots of renders, all working fine until a few days ago.Now when i submit a render to the cloud in Revit 2014, it takes forever to process and then says either"could not complete your request, failed to authenticate" or something similar but with "could not upload file" as well.
I have tried logging out and clearing my browser cache etc but it still wont work.
I'm attempting to render a series of images in the cloud and my plan is to take these images into Photoshop so that I can apply a background from an image I possess.
To do this I need the background to be a plain white background, export as a TIFF or PNG, then add an alpha channel in Photoshop. The problem is that whatever settings I apply in Revit, the cloud rendering always gives me the standard grey / blue horizon background. I have changed the render settings using the render setup, through the view properties, through the graphic display, still no joy....
