Revit :: Why Does Sweep Appear In Blue
Oct 9, 2013
I have a frame created as a sweep in a door family - but for some reason it always shows in blue linework, even when not selected. If this is to highlight an error or other issue with the model ?
It seems to have appeared after I deleted the cut opening outline and replaced it with a couple of Void Extrusions (to allow me to control the wrap of the plaster finish and not have it impact on the structural opening size).
The frame does sit within an extrusion void, but it is not selected to cut it.
View 9 Replies
ADVERTISEMENT
Jan 29, 2014
Solution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
View 1 Replies
View Related
Feb 22, 2013
getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
View 1 Replies
View Related
Jul 29, 2011
I making a glass panel with a metal trim for a bank window teller family. How do I control the lineweights for the metal profile?
It seems by default wide lines are being used. I don't see an option in the family editor to pick thin lines.
View 1 Replies
View Related
Nov 13, 2012
I have applied a material to a wall sweep, but whenever the sweep turns a corner the material flips upside down.Note that the frieze is supposed to be on top.
View 3 Replies
View Related
Nov 16, 2011
Not sure this is possible. I'm modeling a box gutter using sweeps, is there any way I can join the 2x sweep?
View 1 Replies
View Related
Dec 21, 2012
Revit 2013 does not have the Wall Sweep panel available from a 3D view.
How do I go about modifying segments?
Specifically, how do I modify the sweep so it wraps both sides and end of the wall?
View 1 Replies
View Related
Jul 3, 2013
I have a wall type that has an embeded sweep for the wall base. My project is set up in two phases, existing and new work. A door has been created in the existing phase, and demoed in the new phase. Where the door has been demolished an infill with the base appears, great! In the new phase I inserted a larger door that cuts the existing walland the entire infiil from the demolished door, but the base still remains. How do I get the new door to cut the base that was created as a result of the infill?
View 1 Replies
View Related
Jun 26, 2013
Is there any way to separate a sweep into all its adjoining pieces? I really want to get all the pieces and their miter angles in order to dimension properly, in order to make an assemble manual.
View 1 Replies
View Related
Feb 13, 2006
I have tried 2 methods of generating a parapet cap:
1 - Creating a wall style with the sweep.
2 - Added a host sweep.
The problem is that using either method or a combination of both methods doesn't always work. I still end up with some caps that don't miter correctly even after editing. Sometimes, different intersections will miter and others won't.
View 9 Replies
View Related
Feb 5, 2014
While working in the conceptual mass environment, I have inserted a closed profile (1 polyline) from a dwg file.
What I need is to either extrude or sweep this profile as a surface, but obviously Create Form only gives me the solid option.
How do I go about doing this?
View 3 Replies
View Related
Aug 5, 2012
Im working in Revit 2010. Im trying to set up a Steel RHS family/types based on a sweep, see attached. Loaded into the family and used in creating the sweep is a profile family with different RHS size types. Is it possible to change the sweeps profile type using a parameter from within RHS family types?
I assume its not possible (unlike driving a nested component using a family type parameter from within the project.)
View 2 Replies
View Related
Jul 9, 2013
How does one draw a complex curved line to act as the path for a sweep in REVIT 14?
I need to create an arch (shown in elevation), that follows a curved path (shown in plan).
View 9 Replies
View Related
Aug 9, 2013
Can sweep profile cut up to the bottom of stair stringer?
Find attached.
View 7 Replies
View Related
Aug 9, 2011
I developed a handrail extension that turns down and terminates on top of the stringer and I'm having some trouble controlling the "bend" to get a smooth arc for all angles. Is there away of aligning or constrining the arc in the sweep path to achieve this?
Image with extreme angle attached.
View 1 Replies
View Related
Dec 19, 2012
I just created a wall sweep on a wall , but I noticed the sweep doesn't adjust to the wall profile, please see the second floor wall in the attached image. Is there anyway to make the sweep adjust to the profile of the wall automatically?
View 2 Replies
View Related
Jul 22, 2013
I'm trying to create a Tiled Skirt (150x150mm) profile or pattern to be used as Wall Sweep. Is there anyway to create this profile as the Family Template: metric profile (wall hosted) only allow me to create a 2D profile.
I would prefer to avoid detail lines or Filled region to get the tiles shown as I need to schedule and quantify this element.
View 1 Replies
View Related
Sep 18, 2013
When preparing an assembly for export to a Revit family, all features need to be recognized as Revit features. I have a part which consists of a sweep with a 3D path, 2 planar sketches projected to a 3D surface to be precise. To make matters worse, it's a sweep whose end meets it's own beginning (the intent of this specific model is to just satisfy a shape, not necessarily reflect the way it's going to be produced). To date I have not found a way to have this sweep feature recognized as a Revit feature, be it as a single feature or multiple. I am running Inventor Professional 2014 on Windows 8 64-bit.
View 2 Replies
View Related
Dec 22, 2012
I am attempting to model an internal 1/8"-27 NPT thread, both the through hole and the tapered part of the hole are modeled, but after I draw the helix and the polygon and orient the polygon to the helix correctly, (or even if I don't, I have tried it) it keeps saying unable to sweep object. I am using Sweep with Alignment with the No option. If I select the polygon first, then click sweep, it works, but rotates the polygon so that what I get ends up looking nothing like a thread profile.
I have tried reducing the polygon radius down to a ridiculously small value, thinking it might have been interference due to a possible trig miscalculation, but with no success, still have the same issue. FYI, I am using a .037" turn height for 27 TPI and a polygon radius of .0214", with a helix small end radius of .177" and large end radius of .189".
View 9 Replies
View Related
Jul 12, 2013
I need to make a sweep along the edge of the wall opening shown in the project, but Revit does not allow me to do it.
View 9 Replies
View Related
Apr 8, 2013
I am attempting to creating a complex profile of a window frame using the Edit Profile command within Sweep. It tells me that lines cannot intersect. How can I draw more that just a simple rectangular profile?
View 3 Replies
View Related
Mar 14, 2012
Ribbon has been acting strange. One example is when creating a sweep the ribbon will not show the mode options to accept or discard changes while creating the sweep path. I have to cycle the ribbon display options to show the X and check options to complete the sweep path. This is only one example of many different odd things happening.
Sometimes when I am simply drawing model lines the selection options for rectangle, circle etc do not appear until I cycle the ribbon display options. This only started in the last week or two.
Windows 7
RAC2012
View 8 Replies
View Related
Oct 4, 2012
Blue sign at the center of columns,
I couldn’t know how to hide a blue sign created at the center of columns in my drawing!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Jul 22, 2012
I downloaded Revit 2013 and this is the first project I started working on. I rendered a few cameras and they turned out ok, but all of a sudden the rendered images turned out blue and yellow. I didn't make any changes in the materials or lighting, but they still turn out the same. I even tried rendering in another computer but nothing changed. I attached the image.
View 9 Replies
View Related
Jun 14, 2013
I recently opened a project I worked on months ago and noticed certain materials in my rendered images had turned blue. I created a new rendering in which all materials came out great and I saved it. Minutes later I opened the new rendering and it too became blue. I worked on this project for months and have not made any changes to materials. All previously saved images in my file, the wall materials, stairs, and certain furniture have all turned blue.
View 6 Replies
View Related
Apr 12, 2012
Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies
View Related
Jan 18, 2013
I am having problems with my rendering, yesterday everything was working fine but today every time i set rendering quality higher than draft, Revit either fails to render (rendering area goes black) or the pc crashes and i get bluescreen.
View 6 Replies
View Related
Aug 16, 2012
i have 1000 eps files to work with and i dont have the time to go to each one and change the color from blue to black! all are different shapes so i need a batch command that will keep the white, white and change any other color to black!
View 1 Replies
View Related
Aug 8, 2013
I'm using PSE 11 on a MacBook Pro. My Blue Skies have too much green in them for my preference. I'm sure there is a way to change this, but how? Also, can I change the default 'blue skies' to something more to my liking for a long-lasting remedy?
View 1 Replies
View Related
Nov 27, 2011
Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
View 1 Replies
View Related
May 16, 2012
Ok so i have this image (Attached) im trying to remove the blue rectangle and the white rectangle leaving the blue swirl on the white back ground, iv tried using content aware but it comes out really bad, maybe im doing it wrong will some one be able to look at this for me, maybe it came out wrong because i have the blue swirl and content aware doesn't work correctly with it .
View 7 Replies
View Related
