Revit :: Pattern For Model
Dec 17, 2012Pattern Drawing you can change it to a Notepad file pattern to become a model.Where can I get more patterns to model or to get access.
View 1 Replies
ADVERTISEMENT
Revit :: Custom Model Pattern
Feb 17, 2011Trying to make a Custom Model Pattern - 8"x24". Listed below is the PAT file content. I tried it and I get the message "No "Model" type patterns found." What is the code in the PAT file.
View 7 Replies View RelatedRevit :: 2014 Filled Region Model Pattern
Dec 23, 2013in 2012 I was able to have filled regions with a model pattern. In 14 the bubble to change the cut fill pattern is greyed out. I need to be able to rotate a pattern so i need a model one.
View 2 Replies View RelatedRevit :: Changing A Fill Pattern From Drafting To Model
Jun 21, 2012I am creating wall sections and I want to change the fill pattern from drafting to model so I can minipulate the pattern. I selected a multitude of elements to change from rigid insulation to CMU and all were the same in the fact none could be changed into model pattern. Heres what I did; I slected an element, then went to the Paint Tool selected Surface Patterns, then Pattern, then Fill Patterns but it wont let me choose model.
View 1 Replies View RelatedAutoCAD Inventor :: Display Bend Direction In Model Flat Pattern
Dec 7, 2011I am trying to create a command to display the bend information in the model Flat pattern. We do not always create a Idw for parts that we have special dies to form. This creates a problem though if the flat pattern bends are the wrong direction because then it is lasered with the bad side of the material to the outside of the part. The only way to know the bend direction is to create a view on an idw just to check this.
I want to open the flat pattern in the ipt and invoke a command to display the bend information on the screen. Need getting a collection of the bend lines in the flat pattern?
Revit :: Surface Pattern Missing In 2D?
Aug 5, 2013I am trying to create a sidewalk area that has a 45 degree 8'x8' hatch pattern in the model. It shows up in 3D but not 2D. What is the problem? It needs to show up in my plans. I have the same problem getting floors to show surface patterns too. Using Revit 2011. A friend gets it to work on his computer with the same version.
View 2 Replies View RelatedRevit :: Beam Not Showing Up Cut Pattern?
Aug 5, 2013This is quite weird because revit architecture 2013 is showing this error. In order to see beam in my architectural layout, we are changing the cut plane value in the view range. With this step I can see the beam but not the cut pattern of the beam..very weird. Also, one more thing, just to check I copy pasted beam modeled in revit 2011 in revit 2013 and I could see the cut pattern. So is something wrong with 2013 beam revit family?
View 2 Replies View RelatedRevit :: Rotating A Custom Pattern?
Jan 4, 2012Is it still not possible to rotate a custom pattern in Revit 2012?
View 4 Replies View RelatedRevit :: How Drafting Pattern Origin Is Determined
Aug 13, 2013I am trying to find out how the drafting pattern origin is determined in Revit 2013. A model pattern is very easy to adjust, but this is not true of a drafting patterns. How the drafting patterns even determine what their origin is. Is it centered on a project extents - therefore changing as the model expands, or is it set by a 0,0,0 origin similar to AutoCAD (but hidden). In an event it does not seem that this origin is adjustable (unless someone out there knows some Revit magic) so perhaps it does not matter, but I would like to know.
View 5 Replies View RelatedRevit :: 2014 Custom Block Pattern
Feb 16, 2014I have a special requirement for a CMU wall, with a 2"x6" stud wall.I am building an exterior wall for a residential home model.
Brick exterior, basically is 3 1/2" width
1/2 mortar joints
I have attached a pic, of what the pattern should look like (created in msWord)1/3 running bond, with 2 sizes of concrete block.I saw somewhere on line, the program for the repeat, but am unable to find again.
Revit :: How To Change Dimensions Of Chosen Pattern
Nov 6, 2012How to change the dimensions of the chosen pattern,
In the screenshot below, I wanted the block pattern to be 0.26x0.5 instead of 0.225x0.450. Is that possible?
I tried to see if the dimensions can be edited but sounds no opting to do this sort of work.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Revit :: Toposurface Pattern Showing Through Wall
Jan 28, 2014I'm having trouble getting the visibility of walls within toposurfaces to display correctly. Please see the two attached images, showing a wall extending into a sloped grade. I have a plan view which in some areas shows the wall above grade, and in other areas shows the wall below grade. The red line through image 2 shows the approximate cut line of the plan view shown on image 1. The problem is that the toposurface pattern extends through the interior of the solid wall, in areas where the wall is buried below grade. The plan view display is set to Hidden Line, not Wireframe, and the wall is not set to display as transparent. I want the wall's geometry to cut out the toposurface - you'd see the concrete hatch on the wall, but not the fill pattern of the topography.
View 1 Replies View RelatedRevit :: Materials Editor Pattern Selection
May 3, 2013I'm having difficulty placing a pattern type on my materials. When I select the pattern from the list that pops up and I click "OK," the pattern selector pops back up and won't let me exit. I think that if I go back to my original pattern, it will go away. I've tried restarting Revit and various other matierals in other projects on different types of families in both the surface and cut pattern prompts.How do I chage my patterns?
View 5 Replies View RelatedRevit :: Brick Pattern Not Showing On 3D Views
Jan 27, 2012I am having trouble on how to show the brick pattern on my 3d views. Some shows some do not, only the shade color. i am exporting or printing to pdf these 3d images under consistent shade mode no shadows. I tried flipping wall orientations, didn't work. Apparently when v viewing afar the patterns do not show, when zooming in to the view they show up. but the savifn the current 3d viewing with the patterns partly showing yields the same output prints.
View 3 Replies View RelatedRevit :: How To Change Scale Of Fill Pattern
Mar 9, 2012Where I need to go to change the scale of a fill pattern. I have brick walls that the brick facade scales about 1/2 of what it should be.
View 1 Replies View RelatedRevit :: Hiding Floor Pattern For Concrete
Jun 28, 2011I have created my model, and have placed the floor assembly in. It is concrete and I see the concrete pattern on the floor. How do I hide or turn that off? I cannot find anything in Visibility Graphics or in the actual floor family...
View 6 Replies View RelatedRevit :: Doesn't Find A Drafting Pattern
Oct 21, 2009I downloaded a Batt insulation pattern but when i want to load it into my wall structure, it is not visible in my floor plan or in 3D.When i want do load it, i can'!I get a message that Revit doesn't find a drafting pattern but it is!!!
where to find a Batt insulation - drafting pattern?
Revit :: Syntax Error In Pattern File Attachment
Mar 15, 2011Now is the pattern problem in hands! I try to attach patterns to wall: Materials, Cut pattern, New, Drafting pattern, Custom, Import:
And path: C/Program files/Autodesk/Revit Architecture 2011/Data
And there: Revit.pat (or any other *.pat file that I have).
And there it comes: An error! Syntax error in line 2 or 12 or 10 ? What has happened? Before I was managed to attach patterns ok. To an other project I mean.
Where on earth is the problem? In the project? The whole program? In the pattern file?
Revit :: How To Apply 6" Vertical Line Pattern
Jan 8, 2014I am using revit LT 2014 and just can't get a material to be be painted on a wall. I would like to apply a 6" veritcal line pattern to look like v-groove board - I create the material, applied the pattern, but when I use the paint function I get nothing
View 1 Replies View RelatedRevit :: Section Line Change Color And Pattern?
Jul 18, 2011I would like the section line to have a special line type and color. How can this be changed?
View 1 Replies View RelatedRevit :: Drafting Pattern To Follow Component's Rotation?
Nov 7, 2013I would like the pattern to follow the rotation of the component when inserted onto the project. I can achieve it with model pattern but I would like to use drafting pattern because we need to show them on different scales.The diffuser family consists of a detail family in order to show the pattern. The pattern is already set to align with object and it still does not work.
View 3 Replies View RelatedRevit :: Create Custom Pattern By Editing PAT File?
Aug 1, 2011I am trying to create a custom pattern by editing the PAT file but I can't seam to get it right The pattern is for a ceiling tile in which the pattern is 4 tiles (24''x96) follow by 1 Tile (4''x96)
View 2 Replies View RelatedRevit :: Cut Pattern Of Embedded Structure Transparent To Wall
Dec 12, 2012We have a structure model linked into our architectural model, where some structure will be located within the wall. The cut pattern of structure is not always showing on top of (opaque) the wall cut pattern. Sometimes the cut pattern appears transparent with the wall cut pattern running through the structural member.
I tried playing with this in a fresh project with just a C channel in a wall. Sometimes it shows opaque and sometimes transparent depending on the position of the channel in the wall. I would try making the member flat at different elevations and sloped at different elevations and they all had different graphic display behavior. Then I tried duplicating the wall and channel to have two sets to play with simultaneously. Modifying the elevation or slope in one would actually change the graphics of the other, when the other didn't move.
I've tried checking/unchecking the following parameters within the project and family without any effect: structural material, structural, show pre-cut in plan, and always vertical. Not only am I assuming that the structural cut pattern should be opaque over the wall's cut pattern, but I can't even identify what is causing it to change with different elevation/slope settings.
I will attach 2 screenshots. The one titled opaque is the desired effect.
Revit :: Detail Lines / Pattern In Linked Files?
Jul 19, 2013when copying a linked model in the host file to multiple levels, why the detail lines are showing in my level from the other levels?
I have attached 2 images to show the V/G setings as well.
Revit :: Wall Hatch Pattern In Section View?
Apr 13, 2013Is it possible to get the wall fill pattern to show up in plan view but not in a specific section view? I tried the detail levels, Course, medium, fine, and of course the hatch pattern doesn't show up in course, but then the wall components don't show up either.
I am in a section view where i want to show a repeated cmu detail component up the wall as part of a detail, but then the hatch pattern is displayed behind it. I don't want to remove the hatch pattern entirely because I still want it to be displayed in the plan view.
Revit :: How To Get Brick Hatch Pattern On Elevations To Line Up Between Levels
Dec 5, 2013How to get the brick hatch pattern on my elevations to line up between levels. I have a two story residence with one wall the front that has brick all the up to the roof (the rest of the house has cement board side on the second story). My problem is that the brick pattern on the second floor wall does not line up with the brick pattern on the first floor.
I tried to just extend the first floor wall up to the roof, but I did not like how it wrapped around the corner of the second floor to tie in with the siding. Surely theres is a way to set the hatch patterns origin like in ACA so that all the bricks line up nice and pretty. Also would lining up the brick pattern on the quoins, which are, whatchamacallums... in-place-edit components?
Revit :: Changing Pattern In Materials Settings From Horizontal To Vertical
Sep 9, 2011I have a client who wants to see a more realistic representation of the direction of the planks in her floor. I cannot figure out ow to do this. I have succesfully changed the direction of the beam system under the floor, but cannot change the direction of the floor panel. I have tried the folllowing:
1) Going into sketch mode and changing the beam support direction.
2) Changing the pattern in the materials fsettings from horizontal to vertical.
Revit :: Change Line Pattern Of Leaders In Text Notes?
Oct 15, 2004is it possible to change the line patern of leaders in text notes, from solid to dash or another one? I know I can change the tick type but can´t find anything for the line.
View 2 Replies View RelatedRevit :: Build A Wall That Has Concrete Block Pattern Offset By 1/2
Aug 31, 2012I'm trying to build a wall that has the concrete block pattern that's offset by 1/2. If I build a wall using mass then I can make it into a pattern that I want but then I can't paint it so that's it's clear or see through. On the other hand if I build a wall just using the walls then I can't find an option for the block pattern.
View 1 Replies View RelatedRevit :: Control Surface Pattern Line Weights Independently?
Sep 29, 2011how to control the surface pattern line weights independently?
View 2 Replies View RelatedRevit :: How To Export A 3D Model
Oct 12, 2011How to export a 3D model from Revit 2012 into 3D Max for rendering?
View 3 Replies View Related