Revit :: Brick Pattern Not Showing On 3D Views
Jan 27, 2012
I am having trouble on how to show the brick pattern on my 3d views. Some shows some do not, only the shade color. i am exporting or printing to pdf these 3d images under consistent shade mode no shadows. I tried flipping wall orientations, didn't work. Apparently when v viewing afar the patterns do not show, when zooming in to the view they show up. but the savifn the current 3d viewing with the patterns partly showing yields the same output prints.
View 3 Replies
ADVERTISEMENT
Dec 5, 2013
How to get the brick hatch pattern on my elevations to line up between levels. I have a two story residence with one wall the front that has brick all the up to the roof (the rest of the house has cement board side on the second story). My problem is that the brick pattern on the second floor wall does not line up with the brick pattern on the first floor.
I tried to just extend the first floor wall up to the roof, but I did not like how it wrapped around the corner of the second floor to tie in with the siding. Surely theres is a way to set the hatch patterns origin like in ACA so that all the bricks line up nice and pretty. Also would lining up the brick pattern on the quoins, which are, whatchamacallums... in-place-edit components?
View 2 Replies
View Related
Jul 18, 2011
I linked in a dwg floor plan and it shows on the first floor but not in the 2nd floor or any others views. I thought as long as you left "current view only" in the Link CAD Dialog box unchecked it should show in all views.
View 3 Replies
View Related
Aug 29, 2011
I have two models in Revit 2011 that have items that are not showing in any views. I restored a backup and tried to copy and paste between the two models and it warns me that there are duplicate items in the same area. Once I get this message all remaining components of that type show up.
I made sure the items weren't hidden or turned off in the model and the views.
View 1 Replies
View Related
Aug 5, 2013
This is quite weird because revit architecture 2013 is showing this error. In order to see beam in my architectural layout, we are changing the cut plane value in the view range. With this step I can see the beam but not the cut pattern of the beam..very weird. Also, one more thing, just to check I copy pasted beam modeled in revit 2011 in revit 2013 and I could see the cut pattern. So is something wrong with 2013 beam revit family?
View 2 Replies
View Related
Jan 28, 2014
I'm having trouble getting the visibility of walls within toposurfaces to display correctly. Please see the two attached images, showing a wall extending into a sloped grade. I have a plan view which in some areas shows the wall above grade, and in other areas shows the wall below grade. The red line through image 2 shows the approximate cut line of the plan view shown on image 1. The problem is that the toposurface pattern extends through the interior of the solid wall, in areas where the wall is buried below grade. The plan view display is set to Hidden Line, not Wireframe, and the wall is not set to display as transparent. I want the wall's geometry to cut out the toposurface - you'd see the concrete hatch on the wall, but not the fill pattern of the topography.
View 1 Replies
View Related
Jul 29, 2012
When I draw a brick wall in the north-south or west-east direction, the pattern is at 45 degrees, but when I draw a wall at any other angle, the pattern is still at 45 degrees but not relative to the brick wall.
View 2 Replies
View Related
Jan 12, 2013
We would like to make the transparency of glass-materials visible in views and section-views by using the "realistic style". During a 3d-view our glass-material looks like transparent. Isn't it possible for REVIT to display the transparency of materials in views ?
The workaround to hide "glass" by using "overriding visibility" is not possible for us because some of our families and project families are using glass-materials inside (Showcases f.e.).
Software (German) :
RAC 2012+2013
Inventor Pro 2013
AcadM 2012
MaxDesign 2013
Sketchup 8 Pro
View 4 Replies
View Related
Dec 21, 2007
I am trying to figure out how to change the color of the exterior of my building, which is brick.
View 2 Replies
View Related
Apr 9, 2013
What I want to do is create a material that has both a brick surface pattern and an underlying solid grey surface pattern. Is this possible? The reason for this is, to represent different colors of brick in the same plane.
View 5 Replies
View Related
Nov 19, 2012
Since the end of Aug. 2012 I've been making families for a manufacturer. I left Friday evening with good families. This morning I am finding all the families I checked with a problem.
When I move the cursor across the various views it doubles the views. Rolling the mouse wheel one click either way to zoom in or out cleans the view but on the next time the cursor goes across the view it doubles it again. Now there are 4 views overlapping each other. The next time it is possibly 8, and so on. It is difficult to count them because they are overlapping but it looks like they are doubling each time.
The software is Revit Architecture 2011 and the computer is a Dell Precision T3500.Are the families corrupted or is it the computer? Is there a toggle I hit that I shouldn't have?
View 4 Replies
View Related
Nov 18, 2012
At Home>Opening tab>Wall in Revit 2012 I cut an opening in a brick rainscreen wall and the brick coursing turned vertical at the wraps.
View 1 Replies
View Related
Sep 21, 2012
I have been using Photoshop for a long time. And I am running PS6 on my Macbook Pro and 27"iMac.I am currently having a situation where Photoshop appears on my desktop and when I try to scroll to a different desktop view, PS screen view still populates it. That only happens on my iMac...not the laptop.I can't seem to find any preference to adjust.
View 5 Replies
View Related
May 16, 2013
I have created section views of my allignment and corridor in my drawing the problem I have is. In some of the section views there is different parts of the different assemblies not showing up. For example in one section I have my lane then my curb then no sidewalk then blvd. It is not the same in each section view either some are missing one thing while others are missing others.
View 1 Replies
View Related
Apr 28, 2013
I have an assembly which is a plated structure. I am using a skeleton file of surfaces to define these plates. I am deriving the required surface/s from this skeleton file into a part file. In the part file I have used thicken to create my plate part. I also turn off the visibility of all derived surfaces in this part.
Now in the plate part when I go into edit derived part - the surface I have used is not grayed out showing it has been consumed by my thicken feature??? I place all my part files into an assembly and create views for each part using isolate (I use these views in a drawing which is used for NC plate cutting)
So the problem I am having is that when I place a view in my drawing the derived surfaces are also showing.
However I have used this modeling technique for many previous projects on previous versions of inventor and have never had this problem.
As mentioned above I have used isolate to create these views. I have since gone back and created the views by turning off the visibility of all other components and the surfaces do not appear in my drawing views.
View 3 Replies
View Related
Oct 20, 2011
I am having an issue with my section views. Some of my subassemblies are only showing on certain stations. If I view the stations on the cross section editor, the corridor looks just fine, but when I go to the section sheet where the corridor is x-referenced, the driveway disappears.
I have rebuilt the corridor numerous times, detached and reattached the drawing, made a new drawing and recreated the sample lines to no avail. Attached are some pictures to show the disappearing driveway on the right side of the street.
View 8 Replies
View Related
Apr 17, 2012
I am trying to program the view placement of various parts and have run into a situation where I need to place flat patterns. On the programming side there isn't an issue, but the issue occurs when attempting to select the wanted view orientattion.
Attached you will find 2 screen shots. One of them is from the "Folded Model" (Take note of the View Cube)
The other is from only Pressing the "Go to Flat Pattern" Button and being in "Flat Pattern" viewing mode (Note the Cube)
I need the Flat Pattern View to correspond with the Orientation of the Folded Model.
View 2 Replies
View Related
Nov 28, 2012
in pattern everything is visible, but i dont know why 3 one is not showing(marked) and also see, model tree of idw
View 1 Replies
View Related
Sep 15, 2012
How to set the distance between the views?Is there a way to set the distance between the views? How much is it by default?
View 4 Replies
View Related
Apr 3, 2012
Map module showing a blank area, but mine works sometimes but not others and I can't see any pattern.
I've added gps coords to many photos now and it works fine when it's working but then randomly sometimes when I start LR it's just blank.
View 2 Replies
View Related
Mar 28, 2013
I have my grids assigned to a scope box and have modified the extents of many of them. How can I apply that to the remaining floors? I think you are able to do this with dependent views. How about with adjacent views on the rest of the floors?
View 1 Replies
View Related
Sep 19, 2012
My class opened Revit today to do a tutorial. However, the default views were messed up. There was only 1 floor plan. I have used Revit before, and I know that this is not right. For example, there was only 1 level, and there were no elevation views even present.
View 3 Replies
View Related
May 3, 2012
I have been trying to import my 3d views to 3ds max from revit as fbx files which has worked. But when trying to save it says either error writing to file or file is possibly corrupt. I have tried resaving and creating new files but that has resulted in the same problem, as well as creating new export files from revit, and saving on my h drive or on seperate usbs that have had no success.
View 1 Replies
View Related
Nov 2, 2012
Has it ever been discussed if it is possible to make the Revit callouts (sections, details, etc.) hyperlinks to those views when printed to PDF? I have added hyperlinks to PDF sets using Bluebeam and Acrobat, but it would be great if that was standard output from Revit.
View 1 Replies
View Related
May 2, 2013
Anything I can do to stop this happening. Split floorplan layout inserted on sheet to compress length to fit.Section lines appear in both and cant hide in one or the other hence overlapping
View 2 Replies
View Related
Jun 14, 2012
I am trying to achive various exploded renders. I have done this in the past using the section box tool and moving the view up and down to reveal or hide parts.I am wanting to do a constructional exploded render as shown in the image attached.
View 8 Replies
View Related
Aug 16, 2011
I am having issues with elevation tags in project north vs. true north. Please see attachment for details.
The tag will rotate the text per the views settings (project north vs. true north).
So it will display correctly in one view but not the other.
View 3 Replies
View Related
Jul 1, 2009
breaking wall section views ? ie. using the section view tool works very well for a BIM wall type, but how can we cut the section so we don't need to have the view show the entire height, etc of the wall. especially when fitting in representative sections of twenty different wall types/situations on a single sheet ?
View 2 Replies
View Related
Aug 11, 2013
I thought that Cut Profile would be working with linked models (with By Linked View) by now. I know it didn't work a few years ago, but we've just tried it in 2014 and it still isn't correctly displaying views that have had the Cut Profile tool used on them when linked into another file (using By Linked View).
View 3 Replies
View Related
Mar 24, 2011
Can you make a glass, which is transparency also in elevation views? In 3D views it is transparency and you can adjust it too, but not in elevation view? Is it so?
You can only hide it totally or let it be non transparency?
See illustration what I mean.
View 3 Replies
View Related
Jun 20, 2013
I would like to have two different layouts of my site plan. One is existing and does not show any of the new construction. The other is a complete view of the project. Is there a way to keep the existing site plan dependent while turning off the new construction to show only the previous + demo? If I set up a view template I cannot alter in the dependent view to make the changes that I want as options are greyed out. Is the only way to do this to create them as independent views?
View 2 Replies
View Related
