Revit :: Beam Not Showing Up Cut Pattern?
Aug 5, 2013
This is quite weird because revit architecture 2013 is showing this error. In order to see beam in my architectural layout, we are changing the cut plane value in the view range. With this step I can see the beam but not the cut pattern of the beam..very weird. Also, one more thing, just to check I copy pasted beam modeled in revit 2011 in revit 2013 and I could see the cut pattern. So is something wrong with 2013 beam revit family?
View 2 Replies
ADVERTISEMENT
Jan 28, 2014
I'm having trouble getting the visibility of walls within toposurfaces to display correctly. Please see the two attached images, showing a wall extending into a sloped grade. I have a plan view which in some areas shows the wall above grade, and in other areas shows the wall below grade. The red line through image 2 shows the approximate cut line of the plan view shown on image 1. The problem is that the toposurface pattern extends through the interior of the solid wall, in areas where the wall is buried below grade. The plan view display is set to Hidden Line, not Wireframe, and the wall is not set to display as transparent. I want the wall's geometry to cut out the toposurface - you'd see the concrete hatch on the wall, but not the fill pattern of the topography.
View 1 Replies
View Related
Jan 27, 2012
I am having trouble on how to show the brick pattern on my 3d views. Some shows some do not, only the shade color. i am exporting or printing to pdf these 3d images under consistent shade mode no shadows. I tried flipping wall orientations, didn't work. Apparently when v viewing afar the patterns do not show, when zooming in to the view they show up. but the savifn the current 3d viewing with the patterns partly showing yields the same output prints.
View 3 Replies
View Related
Jun 14, 2012
I am trying to model a curved beam but I am having problems as it doesn't snap to the roof line I have already.
View 1 Replies
View Related
Nov 18, 2013
I am creating a beam system. I click the "beam system" button on the structure panel. However, it then goes into sketch mode without stopping to allow me to select "automatic beam system" and/or "Tag on Placement." Fortunately, I can see that "automatic beam system" is already selected in the split second that flashes before going to sketch mode.
However, I do not have the opportunity to select the "Tag on Placement." I am really new to Revit and thus I am wondering if there is a different way to possibly turn on the tagging since the way I know is not an option.
View 1 Replies
View Related
Mar 7, 2012
I've been screwing around with beams in Revit for years and still have issues with the gaps at the connections. There is a shape handle and a structural component end. Either way, the beam decides where it wants to end. If I put two precast beams end to end, resting on an inverted tee girder that needs to have the 9" tee portion extend between the two joists, Revit doesn't like that and does its own thing. I move one, the other follows. I move both far enough away from eachother, then drag one end to where it needs to be, cool, then when I drag the other...boom...they snap together. Yes, I'm aware of the "start and end extension" in the properties window, this is incredibly time consuming and if one of the beams are switched around, I need to remember if this end was the start or end. In addition, the structural component end will go initially where it wants to, so there's no guarantee that if the parameters are correct, the beam/joist will be.
Can I remove all "rules" that beams have so I can place these correctly?
View 1 Replies
View Related
Sep 9, 2013
The beam is continuous. The connection details are not important. They're some kind of plate welded to the beam and bolted through the column web. I don't need it to be able to do structural calculations.
Join won't select a structural column or beam. Align creates a rotation error because of the beam's pitch. The column height appears to only change by the Level, but again the beam is pitched. Setting the height above the beam breaks the beam.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 2 Replies
View Related
Jul 15, 2011
If i draw a beam in plan view en define the height, the beam disepare. Is there a posibility that the beam is in place and you can see a dash dot line and two dashed lines in plan view?
View 1 Replies
View Related
Nov 19, 2012
How can we calculate the formwork of column & beam? Is it possible to add "Height" parameter in Column. Because we add formula into the Family file as below:
Perimeter = (2*Depth+2*Width)
Formwork Area = Perimeter*Height
View 9 Replies
View Related
Apr 15, 2013
See attached. What's the best way to model this sloped grade beam? Can I use the sweep?
View 4 Replies
View Related
Mar 1, 2012
What's the best way to model a concrete beam that has the fireproofing in it?
View 4 Replies
View Related
Apr 14, 2013
I try to 'lock' a beam system that I have used for rafters to the underside of my roof.I've successfully got the walls and gables linked in with the roof, and have set up reference planes for cutting of rafters (that should - I think - mean that rafters can move slightly - or change pitch, whilst maintaining same cut extents at rafter ends).
Trouble is - the rafter Beam System does not update with the roof.
My creation approach for the Beam System was to select the underside of the roof as the 'Working Plane' - then edit the boundary to project beyond the walls and form the overhang. I projected it further than I required to provide the excess needed in case I wanted to push the cut plane outwards.
I assumed that selecting the underside of the roof as the working plane would 'lock' the two together, but it doesn't appear to work.Have I missed a straightforward step to link the two elements together ?
View 9 Replies
View Related
Mar 21, 2013
How do I show rafters connected to the ridge beam on a framing plan? How to show collar ties on this framing plan or section?
View 3 Replies
View Related
May 27, 2013
Revit Architecture 2014? I've been trying to use the structural beam system, but when I select the joist I cannot select the start/end extension in the properties dialog box. I would like to know why is that?
View 1 Replies
View Related
Feb 7, 2012
I have a problem inserting the slanted columns when I use the "Beam/Column joints" commando. When I insert the slanted column, the beams are divided.
It should look like picture 1, but it always ends up as image 2. How can I solve this?
View 4 Replies
View Related
Nov 28, 2012
in pattern everything is visible, but i dont know why 3 one is not showing(marked) and also see, model tree of idw
View 1 Replies
View Related
Apr 3, 2012
Map module showing a blank area, but mine works sometimes but not others and I can't see any pattern.
I've added gps coords to many photos now and it works fine when it's working but then randomly sometimes when I start LR it's just blank.
View 2 Replies
View Related
Nov 30, 2012
I'm trying to make a repeat pattern tile (using CS5 on Windows 7), but when I crop the pattern, the expanded paths underneath become visible as on the flowers.This is what I did after creating the artwork:
Used the rectangle tool to make a box with fill/stroke directly on top of the artboard.. Select all > Expand (selecting stroke only, not fill) Deselect the cropping box and grouped the remaining objects. Reselected the cropping box and grouped all objects Pathfinder > Crop I'm guessing it may have something to do with the fact I used a gradient on the flowers but how to resolve it.
View 6 Replies
View Related
Dec 17, 2012
Pattern Drawing you can change it to a Notepad file pattern to become a model.Where can I get more patterns to model or to get access.
View 1 Replies
View Related
Aug 5, 2013
I am trying to create a sidewalk area that has a 45 degree 8'x8' hatch pattern in the model. It shows up in 3D but not 2D. What is the problem? It needs to show up in my plans. I have the same problem getting floors to show surface patterns too. Using Revit 2011. A friend gets it to work on his computer with the same version.
View 2 Replies
View Related
Feb 17, 2011
Trying to make a Custom Model Pattern - 8"x24". Listed below is the PAT file content. I tried it and I get the message "No "Model" type patterns found." What is the code in the PAT file.
View 7 Replies
View Related
Jan 4, 2012
Is it still not possible to rotate a custom pattern in Revit 2012?
View 4 Replies
View Related
Nov 2, 2011
When constructing my contours in the site plan, they are not visible. The graphic visibility shows they are visible. When I go to the 3d views the contours are visible.
View 1 Replies
View Related
Aug 9, 2013
I inserted a CAD link "this view only" and I cannot now get it to turn on in any other view. I used this option so I would not have to hide it in every view. Now do I have to delete it and start over inserting it so it shows up everywhere?
View 2 Replies
View Related
Aug 13, 2013
I am trying to find out how the drafting pattern origin is determined in Revit 2013. A model pattern is very easy to adjust, but this is not true of a drafting patterns. How the drafting patterns even determine what their origin is. Is it centered on a project extents - therefore changing as the model expands, or is it set by a 0,0,0 origin similar to AutoCAD (but hidden). In an event it does not seem that this origin is adjustable (unless someone out there knows some Revit magic) so perhaps it does not matter, but I would like to know.
View 5 Replies
View Related
Feb 16, 2014
I have a special requirement for a CMU wall, with a 2"x6" stud wall.I am building an exterior wall for a residential home model.
Brick exterior, basically is 3 1/2" width
1/2 mortar joints
I have attached a pic, of what the pattern should look like (created in msWord)1/3 running bond, with 2 sizes of concrete block.I saw somewhere on line, the program for the repeat, but am unable to find again.
View 3 Replies
View Related
Nov 6, 2012
How to change the dimensions of the chosen pattern,
In the screenshot below, I wanted the block pattern to be 0.26x0.5 instead of 0.225x0.450. Is that possible?
I tried to see if the dimensions can be edited but sounds no opting to do this sort of work.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
May 3, 2013
I'm having difficulty placing a pattern type on my materials. When I select the pattern from the list that pops up and I click "OK," the pattern selector pops back up and won't let me exit. I think that if I go back to my original pattern, it will go away. I've tried restarting Revit and various other matierals in other projects on different types of families in both the surface and cut pattern prompts.How do I chage my patterns?
View 5 Replies
View Related
Mar 9, 2012
Where I need to go to change the scale of a fill pattern. I have brick walls that the brick facade scales about 1/2 of what it should be.
View 1 Replies
View Related
Jun 28, 2011
I have created my model, and have placed the floor assembly in. It is concrete and I see the concrete pattern on the floor. How do I hide or turn that off? I cannot find anything in Visibility Graphics or in the actual floor family...
View 6 Replies
View Related
Oct 21, 2009
I downloaded a Batt insulation pattern but when i want to load it into my wall structure, it is not visible in my floor plan or in 3D.When i want do load it, i can'!I get a message that Revit doesn't find a drafting pattern but it is!!!
where to find a Batt insulation - drafting pattern?
View 5 Replies
View Related
