I am trying to create a sidewalk area that has a 45 degree 8'x8' hatch pattern in the model. It shows up in 3D but not 2D. What is the problem? It needs to show up in my plans. I have the same problem getting floors to show surface patterns too. Using Revit 2011. A friend gets it to work on his computer with the same version.
View 2 Replieshow to control the surface pattern line weights independently?
View 2 Replies View RelatedI have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
How to make 2D pattern from 3D surcace tube?
View 8 Replies View RelatedWhat is the alternative for the missing pattern maker, who could generate random patterns?
View 2 Replies View RelatedI have a section view in which the section lines are MIA. Is there a way to retrieve them? So I can change the scale?
View 4 Replies View RelatedI recently switched to Inventor 2012 from a previous version. I cannot find the create flat pattern command. Some of my coworkers were able to customize their RMB menu to have this command, but I am not even able to do that! (They don't have the command on the ribbon, either.)
I attached a picture of my sheet metal ribbon...
Inventor Pro 2013 SP 1.1
I’m suing the Mould Design feature of Inventor Professional and need to have four cavities for this mould. When I try to use the pattern function nothing happens. I look at the Wiki help and it says that I have to enter values for X direction X distance etc, but this dialogue box does not appear.
How can I get the box to appear?
I created an iLogic rule that allows in a sheet metal part to the informations Length, widht and area of a flat pattern. This rule run and the iproerties are created (see attachment file).
Now, I will run this rule from an assembly file to create automatically, in all sheet metal components, theses iproperties.
Is it possible ? what must I change in this rule ?
I have a scanned model of a casting. It was necessary to delete surfaces to remove the casting flash from the model.
I have lofted/patched/stitched the missing surfaces to close the solid. Apparently there is a gap somewhere because the model remains as a surface instead of returning to a solid.
How can missing surfaces be found in the model?
What else can prevent the model from returning to a solid?
When stitching, the gap tolerance was set to .002". The model will "rebuild" without any error messages.
Pattern Drawing you can change it to a Notepad file pattern to become a model.Where can I get more patterns to model or to get access.
View 1 Replies View RelatedThis is quite weird because revit architecture 2013 is showing this error. In order to see beam in my architectural layout, we are changing the cut plane value in the view range. With this step I can see the beam but not the cut pattern of the beam..very weird. Also, one more thing, just to check I copy pasted beam modeled in revit 2011 in revit 2013 and I could see the cut pattern. So is something wrong with 2013 beam revit family?
View 2 Replies View RelatedTrying to make a Custom Model Pattern - 8"x24". Listed below is the PAT file content. I tried it and I get the message "No "Model" type patterns found." What is the code in the PAT file.
View 7 Replies View RelatedIs it still not possible to rotate a custom pattern in Revit 2012?
View 4 Replies View RelatedI have been trying to follow "Autodesk 3d Civil Help>Surfaces>Adding and Editing Surface Data" in order to construct a surface from a point cloud I have, in x,y,z format. I have been trying to creat a grid surface since my data is regular DTM data.
My first issue is that a lot of the options are greyed out when creating the surface (for example I cannot change "Render Material Style". I can still create a surface though. The second, more important issue, is that I am then told to expand the surface definiton section on the Prospector tab and click on the points icon there. This icon is simply not there for me - I have a choice of Boundaries, DEM Files or Edits.
I should point out that I am working in Autodesk Civil 3d 2006.
Is it some issue with the liscence/installation? Or am I missing something erally obvious that greys out some options and makes others dissapear completely!
I've created a triangulation volume surface to compare two surfaces. Under the analysis tab in Surface Properties I have banded my levels in metre intervals and coloured the bands accordingly. I would now like to display the 'banding' in my drawing. Under the information tab I should be able to select 'Elevation Banding (2D)' as a Surface Style, however this is missing and I can only select 'Standard'... How to get this selection back.
View 4 Replies View RelatedI am trying to find out how the drafting pattern origin is determined in Revit 2013. A model pattern is very easy to adjust, but this is not true of a drafting patterns. How the drafting patterns even determine what their origin is. Is it centered on a project extents - therefore changing as the model expands, or is it set by a 0,0,0 origin similar to AutoCAD (but hidden). In an event it does not seem that this origin is adjustable (unless someone out there knows some Revit magic) so perhaps it does not matter, but I would like to know.
View 5 Replies View RelatedI have a special requirement for a CMU wall, with a 2"x6" stud wall.I am building an exterior wall for a residential home model.
Brick exterior, basically is 3 1/2" width
1/2 mortar joints
I have attached a pic, of what the pattern should look like (created in msWord)1/3 running bond, with 2 sizes of concrete block.I saw somewhere on line, the program for the repeat, but am unable to find again.
How to change the dimensions of the chosen pattern,
In the screenshot below, I wanted the block pattern to be 0.26x0.5 instead of 0.225x0.450. Is that possible?
I tried to see if the dimensions can be edited but sounds no opting to do this sort of work.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I'm having trouble getting the visibility of walls within toposurfaces to display correctly. Please see the two attached images, showing a wall extending into a sloped grade. I have a plan view which in some areas shows the wall above grade, and in other areas shows the wall below grade. The red line through image 2 shows the approximate cut line of the plan view shown on image 1. The problem is that the toposurface pattern extends through the interior of the solid wall, in areas where the wall is buried below grade. The plan view display is set to Hidden Line, not Wireframe, and the wall is not set to display as transparent. I want the wall's geometry to cut out the toposurface - you'd see the concrete hatch on the wall, but not the fill pattern of the topography.
View 1 Replies View RelatedI'm having difficulty placing a pattern type on my materials. When I select the pattern from the list that pops up and I click "OK," the pattern selector pops back up and won't let me exit. I think that if I go back to my original pattern, it will go away. I've tried restarting Revit and various other matierals in other projects on different types of families in both the surface and cut pattern prompts.How do I chage my patterns?
View 5 Replies View RelatedI am having trouble on how to show the brick pattern on my 3d views. Some shows some do not, only the shade color. i am exporting or printing to pdf these 3d images under consistent shade mode no shadows. I tried flipping wall orientations, didn't work. Apparently when v viewing afar the patterns do not show, when zooming in to the view they show up. but the savifn the current 3d viewing with the patterns partly showing yields the same output prints.
View 3 Replies View RelatedWhere I need to go to change the scale of a fill pattern. I have brick walls that the brick facade scales about 1/2 of what it should be.
View 1 Replies View RelatedI have created my model, and have placed the floor assembly in. It is concrete and I see the concrete pattern on the floor. How do I hide or turn that off? I cannot find anything in Visibility Graphics or in the actual floor family...
View 6 Replies View RelatedI downloaded a Batt insulation pattern but when i want to load it into my wall structure, it is not visible in my floor plan or in 3D.When i want do load it, i can'!I get a message that Revit doesn't find a drafting pattern but it is!!!
where to find a Batt insulation - drafting pattern?
Now is the pattern problem in hands! I try to attach patterns to wall: Materials, Cut pattern, New, Drafting pattern, Custom, Import:
And path: C/Program files/Autodesk/Revit Architecture 2011/Data
And there: Revit.pat (or any other *.pat file that I have).
And there it comes: An error! Syntax error in line 2 or 12 or 10 ? What has happened? Before I was managed to attach patterns ok. To an other project I mean.
Where on earth is the problem? In the project? The whole program? In the pattern file?
in 2012 I was able to have filled regions with a model pattern. In 14 the bubble to change the cut fill pattern is greyed out. I need to be able to rotate a pattern so i need a model one.
View 2 Replies View RelatedI am using revit LT 2014 and just can't get a material to be be painted on a wall. I would like to apply a 6" veritcal line pattern to look like v-groove board - I create the material, applied the pattern, but when I use the paint function I get nothing
View 1 Replies View RelatedI would like the section line to have a special line type and color. How can this be changed?
View 1 Replies View RelatedI would like the pattern to follow the rotation of the component when inserted onto the project. I can achieve it with model pattern but I would like to use drafting pattern because we need to show them on different scales.The diffuser family consists of a detail family in order to show the pattern. The pattern is already set to align with object and it still does not work.
View 3 Replies View RelatedI am creating wall sections and I want to change the fill pattern from drafting to model so I can minipulate the pattern. I selected a multitude of elements to change from rigid insulation to CMU and all were the same in the fact none could be changed into model pattern. Heres what I did; I slected an element, then went to the Paint Tool selected Surface Patterns, then Pattern, then Fill Patterns but it wont let me choose model.
View 1 Replies View Related