AutoCAD Civil 3D :: Elevation Bandon (2D) Surface Style Is Missing
Apr 9, 2013
I've created a triangulation volume surface to compare two surfaces. Under the analysis tab in Surface Properties I have banded my levels in metre intervals and coloured the bands accordingly. I would now like to display the 'banding' in my drawing. Under the information tab I should be able to select 'Elevation Banding (2D)' as a Surface Style, however this is missing and I can only select 'Standard'... How to get this selection back.
View 4 Replies
ADVERTISEMENT
Jun 24, 2013
I have a surface with all sorts of heights, and want to add color to different heights. Getting the color there is not that difficult, but how do I swap them around? i.e. red is 'low ground' and blue is 'high ground'. In Holland we use it the other way around though, so blue should be low ground and red high ground.
Where exactly do I change this? I've tried it in the surface style tab, surface properties tab, analysis tab, and some others, but no success so far.
View 9 Replies
View Related
Oct 8, 2013
C3D 2012 SP3 on Win 7 Pro:
I have an alignment with horizontal PVI points that are coincidental with COGO points. I want to display in a profile view, a surface elevation at the alignment PVI points in a band style. Is it possible to do this? If so, how?
View 1 Replies
View Related
Apr 4, 2012
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
View 1 Replies
View Related
May 22, 2013
I used the Volume dashboard to cal volume so when I view the surface in object viewer or 3D I see my TIN volumes surface at zero elevation is this right? I think the reason is because they want us to see both surface so they are not on top of one to another.
View 5 Replies
View Related
May 1, 2013
How can I change the text style of spot elevation labels. I need to have my existing spot el. show as a different text tyle to the proposed spot el. I have attached a picture.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 2 Replies
View Related
Sep 27, 2013
I'm getting a zero elevation for the surface I create when I compare surfaces to get volumes. What am I missing?
View 9 Replies
View Related
Jun 26, 2013
I have a drawing that someone else created that has a spot elevation label for a surface. It labels the surface (PAD) then automatically subtracts a set distance for another elevation (GFE) and adds a set distance for another elevation (FFE). After doing some research, it looks like it was created with an expression?
I have two questions:
First, where to go to get a better understadning of this? I'm not familiar with expressions.
Second, where can I find the expression in drawing to make an edit to the set distances. I can remove the GFE/FFE as they are separate components in the label style, but I don't see where to modify the distance it adds or subtracts.
View 1 Replies
View Related
Apr 25, 2013
I have created a surface, when I hover over a contour on it I used to get name,style, layer, elevation. Now I get them all except elevation, I didn't change anything (not on purpose at least) in my drawings.
View 6 Replies
View Related
Feb 8, 2006
I've tried to create a surface analysis by using a point group reading xdata to set the elevations and when I set my surface properties to display the elevation shades it will only allow me to set the range to 5 or less. All of the other analysis settings for direction, slope, and slope arrows allow me to input the nuber of ranges I want, but I need the elevation analysis.
View 5 Replies
View Related
Apr 17, 2012
In the previous C3D 2012 version I was able to set surface transparency just setting it on a layer with defined transparency. Example: I set my "existing ground" surface to a created "EG" layer (example name) and set transparency layer to 50% (example, again) and it WORKS! My surface become transparent...
But now, in the C3D 2013, I can't get the same results... my surface is not getting transparent. I already tried to turn off/on hardware acceleration and adaptive degradation and show/hide transparency.
More details: I can get transparency on points, triangles, contours etc... but not on elevation, and this is my priority.
Autocad Civil 3D 2013 - Infrastructure Design Suite
Windows 7 64 i7 860 @2.80GHz 8GB Ram Quadro 2000D
View 9 Replies
View Related
May 3, 2012
We work with Hydro graphic surveys that have large numbers of points. We would like to be able to display girded spot heights colored to represent the elevation. (Similar to elevation banding)
I have created a surface and then created surface elevation points on a grid with spacing of 15m. I have tried looking at setting up a style that will adjust the color depending on the elevation ie 0 to -1 = red but haven't made any progress.
View 2 Replies
View Related
Aug 16, 2013
I have a question about pipeline networks.
I have a civil3d pipe network that has modeled by my co-worker before.
Now I want to put that pipe network on new surface and get rim elevation from surface automatically and also after stretch it can update rim elv based on that surface.
View 3 Replies
View Related
Jun 1, 2012
I have created existing and proposed surfaces in Civil 3D 2008 and I'm trying to create a volume surface to produce a cut & fill map. The problem I'm running into is everything I try to follow mentions choosing Elevation Banding (2D) as the style. The only style I have to choose from is Standard. Does the Elevation Banding (2D) style normally come with the program? Or is this something you have to create?
View 3 Replies
View Related
Feb 18, 2013
I got this plan from a third person and, the point from the survey have the property " bloc ". In their attribute property, I can see the elevation value. but in the z of the actual bloc, it shows zero. I would like to tell C3D to use the attribute elevation for his actual Z in the drawing. How can I achieve this ?
View 6 Replies
View Related
Nov 15, 2013
is it possible to export elevations from a surface at a given interval? i can easily export all the data i used to build the surface, but now I am wondering if its possible to export/extract the surface to a CSV or TXT file with a position and elevations, say, every 5 feet?
View 3 Replies
View Related
Jun 19, 2012
I am using Civil 3d 2012 and an trying to apply elevation banding (one color) to a surface that is completely flat. Everything seems to be in order but nothing shows up. If I add another point file to it that has a variety of elevations then the elevation bands show up, if i remove it it disappears again. I can view the boundary and get elevation readings when I mouse over the surface.
View 6 Replies
View Related
Sep 27, 2013
I just used 8 points to create a surface - see the right-hand-side of the 1st attached file.
I went to Settings => Surface => Label Style => Spot Elevation =>Elevation Only => Label Style Composer - Elevation Only => Text Contents: <[Surface Elevation(Uft[P2[RN]AP[SN|OF]>P<[Description(CP) - see the 2nd attached file..
I went to Prospector => Surface => Surface1 => Definition and I did not see any place for editing Elevation - see the left-hand-side of the 1st attached file.
How to make the Elevation and my stuff in Description show up in the DWG.
View 8 Replies
View Related
Oct 30, 2012
I have a project I designed and grading plan is almost done. My proposed surface lables read as 1256.50. How can I get them to read just 56.50? I have a FG surface I created and am labeling using surface elevations. I am running out of room and need to free up some space. I don't want do drop my surface 1200'.
View 3 Replies
View Related
Feb 27, 2012
I just got a topographic map of some land we plan to develope, and would like to work out some preliminary earthmoving analysis.
I would like to sample that surface at very specific locations -- I could produce the required points in PNE format.
What I want is to find the way to: (1) import those points, (2) sample elevation from the surface at those locations, and (3) export the 3D poitns in PNEZ format.
View 2 Replies
View Related
Jul 5, 2013
I have been searching for a way to rotate surface spot elevation labels but have not been able to find a solution to do so. Has this feature been added to 2013 or 14? I do not want to use the point and label styles for my surface elevation, even though these can be rotated. I have several miles of roadway with many horizontal curves and would like the surface labels aligned with and along the centerline. I prefer not to update the spot elevations when the profile is revised.
C3D 2013 (latest updates), 2014 Infrastructure Design Suite
Win 7 Pro, 64-bit
16 GB RAM
View 3 Replies
View Related
Mar 6, 2012
Our provincial standard requires subgrade and subbase surfaces to have a normal cross slope of -3%. The base and asphalt surfaces have a normal cross slope for the driving lane of -2% and -5% for the shoulder.
I have been trying to figure out how to do this in C3D. I have thought of different ways of handling this for a straight tangent, but have not tested them. What is causing me the most grief at the moment is how to handle this in a curve with super elevation.
The transition will be different for -2%, -3% and -5% Runout distances.
Can C3D handle this? What about using Subassembly Composer?
(I should mention that I have tried with Subassembly Composer, but I am not sure how to deal with superelevation. -
View 2 Replies
View Related
Oct 1, 2013
I created a new surface, pasted my OG surface into it, set the build to exclude elevations less than and greater than but my surface still is showing every contour range. I want to only show contours at elevations of 371.5 and 370.5
Is it because it's a pasted surface?
View 6 Replies
View Related
Dec 18, 2013
xrefing a drawing that has annotated surface labels spot elevations into a Precise Grading Breakout Sheet, but making sure those labels plot screened. How do I make sure I can plot it screened? I have set the label styles By Layer and the text within that style is set By Layer and the Layer I created for the styles is set to plotstyle screened and color 8, I also made sure that the Precise Grading breakout sheet has the xref layers applicable to those surface labels set to screened plotstyle and color 8.
View 1 Replies
View Related
Oct 21, 2013
Today I created a TIN Volume Surface. The volume surface seems to have a "resolution" issue if you will when displaying using elevation banding. In the attached screenshot note how the edges of the surface are "squared" or pixelated. Also, the blue lines are "hide" boundaries, and they have the same effect. I've created volume surfaces before with no issues until now.
The volume surface compares 2 surfaces that were created from nothing but contours. Some of the contours can be seen in the attached image.
I've tried REDRAW and REGEN, the image looks the same in model space and paper space, I've tried closing AutoCAD and reopening the file. I deleted the volume surface and then created a new one... I'm sure there's just a setting somewhere that I'm missing.
For comparison, also attached is a screenshot a "normal" volume surface that I created before. This one has no "hide" boundaries, but the edges of the surface aren't "squared."
View 2 Replies
View Related
Jun 16, 2012
When creating surface profile Is civil 3D use interpolation to get elevation of unknown (points which not having elevation data) points?
Or just join elevations which have elevation data(input data)?
AutoCAD Civil 3D 2012 SP 2
View 2 Replies
View Related
May 8, 2013
I know that I can add coordinates for such elevation using text component editor but I have to add the letter "N" for North or "E" for East to identify the location of the elevation (North/East/South/West). But, is there a way to make a label style that reads up the location of an elevation automatically?
I've attached pictures below for this issue.
C3D 2012, C3D 2013
Windows 7 Professional 64-bit
Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz
View 2 Replies
View Related
Jul 7, 2010
My workflow consists of building a point cloud object from a LAS file, filtering it for ground data, and and building a surface object with it. Breaklines are inserted into a surface object, and then the surface object is exported to a DEM file to be used in a GIS application. The problem is that Civil 3D rounds the elevations to 1-foot intervals, even when the file is structurally floating point. How to override this rounding to get floating point values that reflects the original data?
View 7 Replies
View Related
Sep 19, 2012
I want to color cut/fill using red/greens schemes.
I want to use "interval with datum" method, and 2' intervals.
That gives like 20 rows for cut and fill, and so c3d applies one red to 5 rows, then next red to another 5, and so on.
I could pick colors by hand, but that dumb dialog is so slow, and its not easy to visually pick a nice gradation.
Is there no way to say "step from this color to that"?
Even when I do get all set up, I am finding performance of displaying the 2d solids takes forever.
I obviously have a large surface, but that is why we pay for good software right?
I am on c3d 2012 on a fast 64 bit win 7 machine. [URL]
View 1 Replies
View Related
Jun 20, 2012
Is there a way for Civil3D to create/generate/extract a contour of a specific elevation such as 105.53 from an existing surface?
View 4 Replies
View Related
Oct 31, 2011
Is there a way to add elevation labels at any position on a feature line without having to create a surface?
View 9 Replies
View Related
