I downloaded a Batt insulation pattern but when i want to load it into my wall structure, it is not visible in my floor plan or in 3D.When i want do load it, i can'!I get a message that Revit doesn't find a drafting pattern but it is!!!
where to find a Batt insulation - drafting pattern?
I am trying to find out how the drafting pattern origin is determined in Revit 2013. A model pattern is very easy to adjust, but this is not true of a drafting patterns. How the drafting patterns even determine what their origin is. Is it centered on a project extents - therefore changing as the model expands, or is it set by a 0,0,0 origin similar to AutoCAD (but hidden). In an event it does not seem that this origin is adjustable (unless someone out there knows some Revit magic) so perhaps it does not matter, but I would like to know.
View 5 Replies View RelatedI would like the pattern to follow the rotation of the component when inserted onto the project. I can achieve it with model pattern but I would like to use drafting pattern because we need to show them on different scales.The diffuser family consists of a detail family in order to show the pattern. The pattern is already set to align with object and it still does not work.
View 3 Replies View RelatedI am creating wall sections and I want to change the fill pattern from drafting to model so I can minipulate the pattern. I selected a multitude of elements to change from rigid insulation to CMU and all were the same in the fact none could be changed into model pattern. Heres what I did; I slected an element, then went to the Paint Tool selected Surface Patterns, then Pattern, then Fill Patterns but it wont let me choose model.
View 1 Replies View RelatedWhen I rotate a view on a sheet, the fill pattern of a filled region doesn't rotate with it.
View 2 Replies View RelatedI have a DWG Site Survey already inserted in my project, but need to place it on a Drafting View sheet to further add annotation. How this is done?
View 2 Replies View RelatedI tried to Drafting Pattern aligned with my two But it is very difficult .
Is there a quick and accurate way to solve this problem
Attache Revit File(Saved 2014)
If it is possible to create proper dimensions for 3D isometric drafting views? In AutoCAD I could set an oblique angle for a dimension but in Revit there is no setting. I can only dimension 3D model views.
See attached PDF for example.
I am learning to use Revit 2012 and having a hard time figuring out why basic drafting features don't seem to work with reference planes. Aligning more than a few of these one-at-a-time is time consuming - any way to extend multiple reference plane lines to a boundary line or object? I read your instructions for offsetting reference planes - when I select the reference planes button in the home tab, the options bar allows me to set an offset distance but I am at a loss as to how one goes about getting the line to offset - I keep getting the layout dimension when i try to click on the line!
View 9 Replies View RelatedHow can i get Floor plan etc to drafting view whitout export to Auto cad and back to revit 2012?? Or freeze a Floor plan will be okay.
View 2 Replies View Relatedwhere could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies View RelatedI am facing this problem for quite sometime that whenever i create a custom pattern in illustrator it appers in swatch panel but once i close the programme and reopen the same i never find my self created pattern.
View 1 Replies View RelatedI am trying to follow some directions and the call for a spline to be drawn onto an image. I can only find a polyline which doesnt work like I need it to. As I understand it a polyline will put a curved line as close as it can to a series of points, whereas a spline will "join the dots". I need to join the dots but with a curve not a jagged straight edge.
View 5 Replies View RelatedI just started using CD X5. I want to buy a cycling skinsuit, similar to this one: URL....
I have a chance to design it myself and send a .cdr file to the company that manufactures it. I have some questions. I drew a basic shape of the suit and split it into 3 objects like this: URL....
Black legs is object 1, middle 2-color part is object 2 and white top is object 3, I wasn't able to fill the middle part with a black-white pattern unless I made it an object. I surely know there is a way to do it all with only 1 object that is divided into 3 sections but how? Smart fill works when you just draw some lines that form a closed contour but regular fill doesn't. Secondly, how to use a pattern fill that doesn't affect outlines? Third question is how to nudge only part of an object, for example if I want to make sleeves longer? Now I'm able to move the whole object only.
I'm running 2002 and I have a drawing with an array of lines (forms a grid ceiling, actually). With OSNAP on I cannot grab the intersection of these lines, however, it does work on other lines in the drawing, as it usually does.
View 9 Replies View RelatedPattern Drawing you can change it to a Notepad file pattern to become a model.Where can I get more patterns to model or to get access.
View 1 Replies View RelatedPhotoshop CS6 the " save for web" function to save on a network location. This network location isn't available to me at this time and now when I want to "save for web" I get an error like " can't perform the job, system can't find the submitted path" (which isn't the exact error but translated from the dutch error: "Kon de bewerking niet voltooien. Het Systeem kan het opgegeven pad niet vinden."
View 4 Replies View RelatedI am trying to create a sidewalk area that has a 45 degree 8'x8' hatch pattern in the model. It shows up in 3D but not 2D. What is the problem? It needs to show up in my plans. I have the same problem getting floors to show surface patterns too. Using Revit 2011. A friend gets it to work on his computer with the same version.
View 2 Replies View RelatedThis is quite weird because revit architecture 2013 is showing this error. In order to see beam in my architectural layout, we are changing the cut plane value in the view range. With this step I can see the beam but not the cut pattern of the beam..very weird. Also, one more thing, just to check I copy pasted beam modeled in revit 2011 in revit 2013 and I could see the cut pattern. So is something wrong with 2013 beam revit family?
View 2 Replies View RelatedTrying to make a Custom Model Pattern - 8"x24". Listed below is the PAT file content. I tried it and I get the message "No "Model" type patterns found." What is the code in the PAT file.
View 7 Replies View RelatedIs it still not possible to rotate a custom pattern in Revit 2012?
View 4 Replies View RelatedI have a special requirement for a CMU wall, with a 2"x6" stud wall.I am building an exterior wall for a residential home model.
Brick exterior, basically is 3 1/2" width
1/2 mortar joints
I have attached a pic, of what the pattern should look like (created in msWord)1/3 running bond, with 2 sizes of concrete block.I saw somewhere on line, the program for the repeat, but am unable to find again.
How to change the dimensions of the chosen pattern,
In the screenshot below, I wanted the block pattern to be 0.26x0.5 instead of 0.225x0.450. Is that possible?
I tried to see if the dimensions can be edited but sounds no opting to do this sort of work.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I'm having trouble getting the visibility of walls within toposurfaces to display correctly. Please see the two attached images, showing a wall extending into a sloped grade. I have a plan view which in some areas shows the wall above grade, and in other areas shows the wall below grade. The red line through image 2 shows the approximate cut line of the plan view shown on image 1. The problem is that the toposurface pattern extends through the interior of the solid wall, in areas where the wall is buried below grade. The plan view display is set to Hidden Line, not Wireframe, and the wall is not set to display as transparent. I want the wall's geometry to cut out the toposurface - you'd see the concrete hatch on the wall, but not the fill pattern of the topography.
View 1 Replies View RelatedI'm having difficulty placing a pattern type on my materials. When I select the pattern from the list that pops up and I click "OK," the pattern selector pops back up and won't let me exit. I think that if I go back to my original pattern, it will go away. I've tried restarting Revit and various other matierals in other projects on different types of families in both the surface and cut pattern prompts.How do I chage my patterns?
View 5 Replies View RelatedI am having trouble on how to show the brick pattern on my 3d views. Some shows some do not, only the shade color. i am exporting or printing to pdf these 3d images under consistent shade mode no shadows. I tried flipping wall orientations, didn't work. Apparently when v viewing afar the patterns do not show, when zooming in to the view they show up. but the savifn the current 3d viewing with the patterns partly showing yields the same output prints.
View 3 Replies View RelatedWhere I need to go to change the scale of a fill pattern. I have brick walls that the brick facade scales about 1/2 of what it should be.
View 1 Replies View RelatedI have created my model, and have placed the floor assembly in. It is concrete and I see the concrete pattern on the floor. How do I hide or turn that off? I cannot find anything in Visibility Graphics or in the actual floor family...
View 6 Replies View RelatedNow is the pattern problem in hands! I try to attach patterns to wall: Materials, Cut pattern, New, Drafting pattern, Custom, Import:
And path: C/Program files/Autodesk/Revit Architecture 2011/Data
And there: Revit.pat (or any other *.pat file that I have).
And there it comes: An error! Syntax error in line 2 or 12 or 10 ? What has happened? Before I was managed to attach patterns ok. To an other project I mean.
Where on earth is the problem? In the project? The whole program? In the pattern file?
in 2012 I was able to have filled regions with a model pattern. In 14 the bubble to change the cut fill pattern is greyed out. I need to be able to rotate a pattern so i need a model one.
View 2 Replies View RelatedI am using revit LT 2014 and just can't get a material to be be painted on a wall. I would like to apply a 6" veritcal line pattern to look like v-groove board - I create the material, applied the pattern, but when I use the paint function I get nothing
View 1 Replies View Related