Revit :: Adjust Drafting Patterns?
Sep 8, 2013I tried to Drafting Pattern aligned with my two But it is very difficult .
Is there a quick and accurate way to solve this problem
Attache Revit File(Saved 2014)
ADVERTISEMENT
Revit :: DWG On Drafting View
Aug 25, 2013I have a DWG Site Survey already inserted in my project, but need to place it on a Drafting View sheet to further add annotation. How this is done?
View 2 Replies View RelatedPhotoshop :: Patterns Appear In CC When Adjust Size Or Lens Distortion
Jul 9, 2013Starting yesterday afternoon, every image that I adjust for size or lens distortion (as seen below) has a pattern appear.
View 3 Replies View RelatedRevit :: How Drafting Pattern Origin Is Determined
Aug 13, 2013I am trying to find out how the drafting pattern origin is determined in Revit 2013. A model pattern is very easy to adjust, but this is not true of a drafting patterns. How the drafting patterns even determine what their origin is. Is it centered on a project extents - therefore changing as the model expands, or is it set by a 0,0,0 origin similar to AutoCAD (but hidden). In an event it does not seem that this origin is adjustable (unless someone out there knows some Revit magic) so perhaps it does not matter, but I would like to know.
View 5 Replies View RelatedRevit :: Doesn't Find A Drafting Pattern
Oct 21, 2009I downloaded a Batt insulation pattern but when i want to load it into my wall structure, it is not visible in my floor plan or in 3D.When i want do load it, i can'!I get a message that Revit doesn't find a drafting pattern but it is!!!
where to find a Batt insulation - drafting pattern?
Revit :: Drafting Pattern To Follow Component's Rotation?
Nov 7, 2013I would like the pattern to follow the rotation of the component when inserted onto the project. I can achieve it with model pattern but I would like to use drafting pattern because we need to show them on different scales.The diffuser family consists of a detail family in order to show the pattern. The pattern is already set to align with object and it still does not work.
View 3 Replies View RelatedRevit :: Changing A Fill Pattern From Drafting To Model
Jun 21, 2012I am creating wall sections and I want to change the fill pattern from drafting to model so I can minipulate the pattern. I selected a multitude of elements to change from rigid insulation to CMU and all were the same in the fact none could be changed into model pattern. Heres what I did; I slected an element, then went to the Paint Tool selected Surface Patterns, then Pattern, then Fill Patterns but it wont let me choose model.
View 1 Replies View RelatedRevit :: Create Proper Dimensions For 3D Isometric Drafting Views
Apr 9, 2012If it is possible to create proper dimensions for 3D isometric drafting views? In AutoCAD I could set an oblique angle for a dimension but in Revit there is no setting. I can only dimension 3D model views.
See attached PDF for example.
Revit :: Why Basic Drafting Features Don't Seem To Work With Reference Planes
Sep 16, 2011I am learning to use Revit 2012 and having a hard time figuring out why basic drafting features don't seem to work with reference planes. Aligning more than a few of these one-at-a-time is time consuming - any way to extend multiple reference plane lines to a boundary line or object? I read your instructions for offsetting reference planes - when I select the reference planes button in the home tab, the options bar allows me to set an offset distance but I am at a loss as to how one goes about getting the line to offset - I keep getting the layout dimension when i try to click on the line!
View 9 Replies View RelatedRevit :: How To Get Floor Plan To Drafting View Without Export To AutoCAD
Mar 2, 2012How can i get Floor plan etc to drafting view whitout export to Auto cad and back to revit 2012?? Or freeze a Floor plan will be okay.
View 2 Replies View RelatedRevit :: Fill Patterns In Sections / Elevations
May 30, 2013I want to create sections and plans showing interior finishes. As walls are all of the same structure I used the split face tool. When applying 'paint' to the face it only gives me the options of materials not fill patterns i.e. hatches. How do I get it to apply hatches or is there a visibility setting that i need to change.
View 1 Replies View RelatedRevit :: Aligning Wall Cut Fill Patterns Possible?
Feb 3, 2014Can we align wall cut fill patterns? For instance; some of the wall material fill patterns that we use can cause confusion when other similar patterns are near by. Is there a way to control the begining or to use the align tool? It seems like Revit will only allow Drafting fill paterns to be used in defining materials "Cut Patterns". Is there a way to make them Model Patterns? Can we control the line weights of those fills?
View 2 Replies View RelatedRevit :: Modifying Fill Patterns In Families
Sep 1, 2011I'm a new Revit user and can't seem to get the hang of fill patterns.If I go to Manage>Additional Settings>Fill Patterns Ise a list of a couple of dozen or so fill patterns with the Drafting Button selected.
But when I try to modify the fill region in a family I'm only given a choice of about six of the patterns.how to "load" the other pattern types.
Revit :: Can't Change Hatch Patterns In Material Editor
Sep 4, 2013I am having a very strange issue that appears in the Materials editor within Revit 2013 Update Release 3. If I change a surface or cut hatch pattern within the editor, and then attempt to close out of the editor, go to a different material, or apply the change, the hatch dialog pops right back up again, as if I never closed it. I have found two ways to get out of this obnoxious loop:
1. Use the 'esc' key to back out of the materials dialog (unfortunately no changes are saved).
2. Change the color of the hatch - this allows for the changes to be applied etc.
I've tried resetting the UI and reinstalling Revit to no avail.
Revit :: Switch To Stop The Patterns At Wall Faces?
May 2, 2011Patterns in my color scheme now extend into the middle of all walls. Is there a switch to stop the patterns at wall faces?
View 9 Replies View RelatedRevit :: Object Style Setting For Line Patterns
Oct 6, 2011Why are my detail lines showing as grayed in my reflected ceiling plan? Not halftoned. Check object style setting for line patterns.
View 6 Replies View RelatedRevit :: Load Hatch Patterns Into Title Block Family
Jan 4, 2012Is there a fast way to load hatches into a title block family?
View 1 Replies View RelatedRevit :: Detail Component Fill Patterns - Align To Element
Aug 28, 2007I've utilized the Plywood-Section detail component out of the Imperial
Library, and it runs left-to-right, no matter the orientation of the element I drew. Messing with the Fill Pattern settings, it looks identical if I set the Plywood-Align pattern to "Align to Element", or "Orient to View". Nothing changes.
Revit :: Adjust Text Position On Levels
Nov 14, 2011Is there any way of adjusting the text on a level?
View 2 Replies View RelatedRevit :: Unable To Adjust Height Of Recessed Can
Jan 11, 2012Can't seem to adjust the height of a recessed can. I placed the can in a floor plan view in a ceiling and it is sitting on top of the ceiling.
View 2 Replies View RelatedRevit :: Can't Adjust 2D Visuals Of Column Grids
Jul 24, 2012Revit Arch 2012. I've got some large grids in the model and need to adjust their 2d extends in a matchline plan. However every time I try to do so, I receive the "Element is too small on screen" error.
Screencast of error in action.
[URL]
I mentioned in the vid that the grids were Copy/Monitor'ed from "another drawing"... I meant another model.
Revit :: Duplicate Baluster From Family And Adjust Widths?
Jul 18, 2011I usually duplicate a baluster from the family and adjust the widths to what I want. I'm trying to make a 1/2" x 4" baluster but its not changing to the new dimensions.
View 5 Replies View RelatedRevit :: Adjust Length Of Tick Marks Used In Dimension Strings?
Jun 15, 2012Is there a way to adjust the length of the tick marks used in dimension strings? I'd like something other than the supplied Diagonal 1/8" or Diagonal 3/64" options.
View 1 Replies View RelatedRevit :: Make Sweep Adjust To Profile Of Wall Automatically?
Dec 19, 2012I just created a wall sweep on a wall , but I noticed the sweep doesn't adjust to the wall profile, please see the second floor wall in the attached image. Is there anyway to make the sweep adjust to the profile of the wall automatically?
View 2 Replies View RelatedRevit :: Levels Not Showing Up On All Of The Elevations Even When Adjust The Drawing Viewport
Mar 27, 2012why have the levels not showing up on all of the elevations even when I adjust the drawing viewport??
View 1 Replies View RelatedRevit :: How Hollow Core Slab Automatically Adjust To Width Of Room
May 7, 2013I have to use concrete hollow core slab in my project, but I was wondering, if it is possible that the hollow core slab automatically adjust itself to the width of the room. I have attached a screen-shot of the problem, where the the last hollow core slab overlap the beam. I can manually change the width of the last beam, but it would take a lot time, moreover if I change the dimension of the overlapped beam, then i have to readjust the last hollow core slab.
View 1 Replies View RelatedRevit :: Add Dimension Parameters Inside Curtain Panel Tag Family To Adjust Tag Position?
Feb 15, 2014How can I add dimension parameters inside a Curtain Panel Tag family to adjust tag position?
View 2 Replies View RelatedRevit :: Family Status - Assign Parameter To Grab Phase Of Object And Adjust Label Accordingly
Nov 9, 2011We use electircal elements in AutoCAD dwgs that have labels to indicate the status of the element by phase. For instance on a floor plan we might have elctrical outlets that are existing (E), new (N), demo (D), etc. How does one do this efficietnly in REVIT? Is there a way to assign a paramter to grab the phase of the object and then adjust a label accordingly? This would be ideal because over time the element s might move from one phase to another such as from new to existing.
View 2 Replies View RelatedPhotoshop :: Drafting Board?
Sep 19, 2008I'm running a copy of Photoshop CS2. Basically just using it for glorified paint for a board game im putting together for friends. I'd like to define some points which the mouse snaps to, so I can draw circles and lines with their centers or ends at the same place, so I don't have to keep nudging over to the center pixel by pixel. I'll be drawing some angles, so a compass would be helpful too.
maybe Im using the wrong software. If, perhaps, you know of a better tool for what I'm doing,
AutoCad :: ISO Standards In Drafting
May 28, 2011From where I can find drafting standards? I mean handy books or codes about how to:
1- name layers
2- define linetype scales
3- select colors for objects
4- define lineweights for objects
5- define plot styles
6- ...
AutoCad :: Why And How Drafting Used In US Patent Process
Sep 30, 20122 page paper on drafting for patents. Why & How is drafting used in the US patent process.
I need to write this paper but why drafting is used in the patent process.
