Revit :: Add Dimension Parameters Inside Curtain Panel Tag Family To Adjust Tag Position?
Feb 15, 2014How can I add dimension parameters inside a Curtain Panel Tag family to adjust tag position?
View 2 Replies
ADVERTISEMENT
Revit :: How To Build Curtain Wall Panel Family - Scale Proportionally
May 29, 2013I am trying to build a curtain wall panel family (see attached). I want the extremities of the solids to be glued to the surrounding frame. I want to be able to scale the model inside the frame with different curtain wall panel system sizes. 5'x4', 6'x8' etc... I am having problems with restricted constraints. I do not know what I am doing wrong. the model inside the panel are created from soild extrusions. if I align the solid extrusion from one side of the frame , only that side will grow or shrink with frame, and makes the model look weird. I tried to group the solids with reference lines in them glued to the reference line grid i created in the panel and that did not work. I want to be to scale proportionally the model inside the panel.
View 6 Replies View RelatedRevit :: Panel Family - Adding Parameters?
Nov 11, 2013I created one panel family. On plan view, I added two parameter for just width and lenght (Picture 1), but at the same time, I cannot added parameter for adjust the angle in the elevation plan(Picture 2) .
Attachment is my .rfa file
Revit :: Curtain Wall Louvre Panel?
Dec 13, 2013I'm trying to work up a standard curtain wall type for our office, and have hit a snag with a curtain wall panel.
I'm trying to make a panel which will feature a louvre profile, that will sit in the curtain wall opening nice and neat, and array the required height of the panel.
I've made up a generic object, inserted that into a CW panel, then got that into my CW OK, and it flexs fine, but if I try and do an array then it all falls apart?
As far as I've got attached, all I can get to work properly is to have the top and bottom louvre, if I turn this into an array it extends outside the bounds of the CW panels left/right reference plans.
I also have tried to do the array based on a division, e.g. 2000/50 = array number, but to do this I need a height, and when I try and put a height in it becomes overconstrained...
Revit :: Curtain Wall Panel As Legend Component
Jul 10, 2008I was able to bring in custom curtain wall panels as legend components-- however, when I set the host length, the height is automatically the same. Is there a way to insert a curtain wall panel into a legend that will have a rectangular shape (in my case, taller than it is wide)?
View 1 Replies View RelatedRevit :: Apply Curtain System To A Mass - Panels Flip Inside To Outside
May 8, 2008When I apply a curtain system to a mass, the curtain panels flip inside to outside as shown in the attached image, when applied to a curved mass surface. Additionally, if these systems are applied independently the system justification (beginning and end) is reversed.
View 5 Replies View RelatedRevit :: Curtain Wall Panel Ends Short Of Mullion
Nov 12, 2012I have a curtain wall profile loaded into a project. When I change the panel in a CW to the profile that I loaded, the new panel is 5/8" short on both sides. As you can see in the attached image, on the left side of the plan view, the panel is 5/8" short of the cw grid line - there is no mullion there. On the right side, the panel is 5/8" short of where the mullion crosses the reference plane in the mullion .rfa file. The system panels on either side terminate correctly.
This isn't specific to any project; it works (or doesn't work) in any file. There are no horizontal mullions in the file shown. How to get the profile to extend properly?
Revit :: Duplicate Baluster From Family And Adjust Widths?
Jul 18, 2011I usually duplicate a baluster from the family and adjust the widths to what I want. I'm trying to make a 1/2" x 4" baluster but its not changing to the new dimensions.
View 5 Replies View RelatedRevit :: Add Parameters To Family Category - View Title
Jan 17, 2012I'm trying to create a custom view title family for the office (see attached). We'd like to have a label for Drawing Type (ie. "Building Plan" in the attached image) in the view title which would appear in the properties tab under identity data, next to the standard Title on Sheet, View Name, etc.
In the project, I am able to create a project parameter which appears as desired in the properties tab, but am unable to add the parameter inside the family when creating it. It seems impossible to add this parameter to the standard view title family template (alongside Detail Number, Sheet Number, etc.).
I tried it using a Generic Annotation family, but in the project, Revit does not recognize that family as a view category family and therefore you cannot choose this family when setting your view type.
Revit :: Tag Showing Parameters Of Generic Model Family?
Aug 1, 2011Is it possible to make a tag that shows instance parameters of a generic model family?
Windows 7
RAC2012
Revit :: Adjust Text Position On Levels
Nov 14, 2011Is there any way of adjusting the text on a level?
View 2 Replies View RelatedRevit :: Standard Solar Panel Family
Feb 1, 2013Does Revit Architecture/M&E/Structures 2013 have a standard solar panel family?
View 3 Replies View RelatedRevit :: Scale DWG Inside A Block With Parameters
Nov 20, 2012Are there any neat tricks to scaling a DWG inside a block with parameters? I would assign a scale factor parameter to Instance Scale but as I can't I'm looking for a workaround.
I have a some 2D elevation trees that I want in my 3D tree block and alI just want to control the height. The problem is that if I explode the DWG in a family everything just disappears .
Revit :: Family Status - Assign Parameter To Grab Phase Of Object And Adjust Label Accordingly
Nov 9, 2011We use electircal elements in AutoCAD dwgs that have labels to indicate the status of the element by phase. For instance on a floor plan we might have elctrical outlets that are existing (E), new (N), demo (D), etc. How does one do this efficietnly in REVIT? Is there a way to assign a paramter to grab the phase of the object and then adjust a label accordingly? This would be ideal because over time the element s might move from one phase to another such as from new to existing.
View 2 Replies View RelatedRevit :: Generic Labels Inside Families To Display Parameters
Jul 10, 2012I have some generic labels inside families to display parameters. These work but they seem to randomly disapear.
I thought it was only happening when families were joined as when I unjoined the offending families the labels were visible again but then after closing and opening the view some of the labels have disapeared again.
If I copy this family to a new location the labels will be visible.
Revit :: Adjust Length Of Tick Marks Used In Dimension Strings?
Jun 15, 2012Is there a way to adjust the length of the tick marks used in dimension strings? I'd like something other than the supplied Diagonal 1/8" or Diagonal 3/64" options.
View 1 Replies View RelatedRevit :: How To Align Nested Family To Reference Line In Host Family To Rotates Around A Certain Point
Jan 29, 2014I'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
VideoStudio :: Adjust Animation Parameters For Titles
May 23, 2012Is there a way to adjust individual animation parameters ( i.e. zoom speed, hold up time, disappearing time etc.) for predefined titles in X5?
I cannot find any of such control neither under options or attributes tabs.
GIMP :: Threshold Function Parameters That Vary By Position?
Apr 1, 2012I would like to obtain a black and white image of a photograph of a book page.
My attempt to do this is by running the threshold function over theentire image. This appears to give the desired result, but onlylocally. It appears that the optimum parameters of the thresholdfunction vary by position (i.e., according to some scalar field), withone extreme in the center of the glare and then radiating outward. Sojust running the threshold function over the entire image withconstant parameters always gives sub-optimum contrast for 75% of theimage. Will I have to find a way to run the threshold function withnon-constant parameters, or is there some other tool to do the job?
Revit :: Unable To See Curtain Wall?
May 6, 2013I am working in Revit 2013 and built the curtain wall on all four side but i am only able to see it in north and south elevation view and not in east and west elevation view.
View 5 Replies View Related3ds Max Animation :: How To Get Position Parameters For Biped COM To Play Within Track View
Feb 11, 2011Is there a way to get the position parameters for a Biped COM to play with in Track View? All I get are the rotation parameters.
If that's not possible I'd like to know a way to manipulate the animation between 2 keyframes. The TCB parameters don't seem to be working for this.
Revit :: How To Join Two Curtain Wall Panels
May 13, 2008I've been added and removed specific mullions along curtain wall grid lines and now have the mullions where I want them. Unfortunately, some of the glass panels remain divided along the grid lines even though the mullions have been removed. Is there some way to join the two panels into one?
View 9 Replies View RelatedRevit :: Create Curtain Wall With Mullion
Sep 9, 2011How to create curtain wall with Mullion and insert in to project.
View 1 Replies View RelatedRevit :: View Filter For Curtain Walls
Oct 24, 2013How would I set up a view filter so only curtain walls are showing. Thew will not show up if walls aren't also checked, but I don't want the walls, just the curtain walls.
View 4 Replies View RelatedRevit :: Vertical Curtain Grid Line
Oct 29, 2012I've created a non-symmetrical curtain wall mullion profile. When I assign that profile to a vertical curtain grid line, it is flipped in the project. In the attached image, you can see that the brace on the right in the family plan view is on the left in the project plan view.
View 9 Replies View RelatedRevit :: Room Boundary For Curtain Walls?
Nov 7, 2013Is it possible to get the room boundary line in a curtain wall to be set to the inner face of the mullion instead of the inner face of the glass?
I have looked at the System family library but cant find a setting for changing this.
Also, setting the location line is greyed out. Why?
If I draw clockwise I get the location line on the inner face of the glass even if the greyed out location line setting in the options bar is set to center.Why?
Revit :: Upside Down Curtain Wall Door
Nov 4, 2005I'm placing a single glass door in my curtain walls, and they keep coming in upside down, with the door handle 4 feet off the ground. How can I make them right side up?
View 4 Replies View RelatedRevit :: Complex Curtain Wall Modeling
Oct 20, 2011Are ther good sources available for learning about modeling curtain walls- complex curtain walls in Revit?
View 1 Replies View RelatedRevit :: Negative Joint Mullion Curtain Walls
Feb 11, 2014I'm trying to get a curtain wall style working, where I would have panels with a clean joint between them, of a controllable size. I'm also working with system curtain wall panels as I expect the CW style will need to work with variable profiles at the top.
My attempt so far has been to do a U-shape profile to get the panels to stop against, but this means the U is seen, particularly at the + junctions of the panels, which is not desirable. I could locally hide the mullions, but this is time consuming and I'd rather do it using a style-based method.
I've also tried doing a filter based on the CW Mullion name, and making it not visible, but this doesn't work for some reason.
Revit :: Can't Load Any Glass Curtain Doors From Seek
May 4, 2012I can't load any glass curtain doors from seek or revitcity. They won't load as a component or door.
I can't place a door into a storefront wall. I get this error saying something like,"cutting surface doesn't not work" I tried to adjust the mullions so that the door would fit, but it still doesn't work.
Can I demension the interior side of a wall when the wall justification is centerline?
Is there a way to calculate the roof load in revit?
Revit :: Select Glass In Curtain Wall To Put Door In It?
Apr 14, 2012I'd like to select glass in curtain wall to put door in it , but it didn't select .......why? attach Jpg for it
View 5 Replies View Related
