I'd like to show feet/inches with arch units even when i have a whole number measurement. right now the dim for 16' shows as 16' only. i want it to show as 16'-0"
View 3 RepliesI have a very simple surface. All of the elevations defining it, are set in feet. When I click on the surface it tells me my max and min elevations are in feet matching the points that I have defining the surface.
Here is the kicker, when I run a distance it is measuring the Z distance in inches and not feet. As you can see by the attached image the distance is 95' but the elevation change is 1 3/8". The actual points defining the surface are 1.28' difference. If I were to do a spot elevation on the surface, it would give me the correct elevation in feet. I am guessing that this is some sort of variable that I have missed, but damned if I can find it.
I have a drawing in metric but I want the results in feet and inches, do I draw it in metric and have Autocad spit out a feet and Inches drawing, is that even possible. Or do I do the conversions up front and explain to the client that he will get his metric drawing back in feet and inches.
Second part, if the drawing is in metric do I open the Autocad Civil 3D metric icon or does it matter. Where I can read up on why there is a metic and imperial Autocad icon?
When I use the distance command the answer displays in inches; I prefer feet of course. How do I navigate to the menu that changes this?
View 4 Replies View RelatedOut of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies View RelatedI've got the Pipe Table style just as I need it except for one thing. I have all circular pipes and I would like the "size" column to display in inches rather than in feet. In the past I was able to multiply this number by 12 in the style composer but that doesn't seem to work anymore.
View 2 Replies View RelatedWhen I try and dimesion my drawing it brings up 8' as 8" on the dimesion line, and when I dimension something like 1'-10" it brings up 1'-10''' on the dimesion line. Once i click the dimesnion to attach it to the drawing I click on the measurement tool and it bring up the correct measurement. Is there a way to fix this?
View 2 Replies View RelatedI have a DWG from a land surveyer, how is the drawing converted into feet and inches so it can be used as an architectural site plan?
View 3 Replies View RelatedI am drawing a plan view of building that is 11 feet by 36 feet. I thought my map units were in feet but when I draw in the linear dimensions, it reads 11 inches x 3 feet. How do I change this?
View 8 Replies View RelatedWhen I had ACAD 2008 I used to copy objects and type 10' or 4' for the distance3 rather than 120 or 48. For some reason in ACAD 2013, it does not accept my distance in feet anymore. Do I suddenly have a setting off in ACAD 2013? I used to be able to work much more quickly and I work with large distances when copying.
View 3 Replies View RelatedI’m a draftsman and I have a calculator that has feet and inches which of course makes things easy assisting in draft. I was wondering for those who do not have such calculator – I was considering creating a simple iphone app that does just that – add/ subtract as well as conversion from metric to imperial and vise versa. Just gauging to see if there is interest.
View 9 Replies View RelatedAny number keypad available with feet and inches keys?? I unfortunately cannot download any software of any kind at work and cannot use programmable keyboards. (I can't even setup my extra buttons on my USB mouse)
I've found them tab and escape buttons which I would also like. But entering dimensions most of the day, this would be useful!
We are having trouble setting up a drawing in Feet & inches. Up until now all we have been drawing in metric.
View 5 Replies View RelatedWhen I run my production sheets I'm only seeing 1300 feet of my profile and I like to see 1500 feet of my profile at 50 scale. Is there a way to show 1500 feet of profile?
View 9 Replies View RelatedI can't find the option that changes the scale from 1/100 to 1/16" to 1'-0" or how to have the scale show up on a drawing. I've gone into options and turned on the scale visibility but get squat on both.
Also where can I find a list of the title block text options ie. ,
I have a drawing that has a scale of 1:100. I need to convert the drawing into feet and inches for remodeling use. How do I determine what the conversion factor is?
View 4 Replies View RelatedHow could i know if i'm using meters, and not inches, feet or millimeters? and how to set autocad to use meters not inches, feet, nor millimeters.
View 9 Replies View RelatedIs there a way that I can add multiple polylines in feet and inches? I downloaded some lisp routines, but they are not in feet and inches.
View 2 Replies View RelatedI received a .dwg file from S. Korea with dimensions and units all in the metric mm and I need the units to be in feet and inches. Is there a command to switch dimensions and units to imperial feet and inches?
Rather than changing units in command UNITS Inches and Architectural, and SCALE 25.4, is there any other way to switch metric to imperial systems. Scaling somewhat does the trick but, provided dimensions remain in mm.
I have a drawing set up to be Survey Feet and everytime i export it to autocad using the export tool it converts it to international feet.
Civil 3D 2012 all sp's
Is there a way to get the dual unit option to read in both feet and inches....for instance 32.75 to read 2'-8 3/4" instead of 2.729 ft?
View 3 Replies View RelatedWhen drawing using imperial units in Revit, it of course interprets values you input as feet until you press " to let it know you mean inches. As I am constantly going between Revit and AutoCAD, which does the opposite, I keep missing the " out of habit and wasting time repeating everything. My question is, is there a way to change the input from feet to inches so I can move more seamlessly between the two programs?
View 2 Replies View RelatedI need to make two banners one is 10ftX14ft and the other is 6ftX8ft. When I create a new doccument there is no option for feet. I need to convert Feet into Inches or Pixels, how can I do that, So illustrator will except the size?
View 2 Replies View RelatedThis is probably simple, but I cannot find how do display dimensions on both feet and inches.
Currently my dimensions display as a decimal (ie 12.5' ). I would like both feet and inches (ie 12' 6" )
Where do I change this, turn on option?
How I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
Is there a variable to force dimension text line to show? I am using annotative dimensions and the placement for the text is forced to the outside of the dimension if it doesn't fit. I get annoyed on having to move the text to show the dimline above the dimension.
View 3 Replies View RelatedIs there a way to make AutoCAD2012 display the area of a closed Polyline as Feet- Inch(ex 22'-4") rather than the feet as a decimal (ex feet=22.3333333) as it does when the units are set to Architectural or Engineering?
View 1 Replies View RelatedJust installed 2013 and have a couple of buggy problems.
1.I can't double click on dims to add / edit text. I've added / changed the cui double click settings but that does work.
2.The new array command does bring up the associated ribbon panel after the array has been created. I can get this to work while using Civils as AutoCAd, but not as Civils?
Is there a way I can see the pixel (not inches) dimensions in the document status bar without having to alt click it, and also see pixels in the info pallete.
View 3 Replies View RelatedI can't figure out how to get my levels to show fractions of inches. I can add a dimension from level to level and see the fraction, but the level itself insists on rounding to nearest inch. View scale makes no difference.
View 2 Replies View RelatedI enlarged a photochrom image (which gimp converted to rgb) to twice its original size, but when I wanted to see its dimensions in inches the image scale showed 6.667 x 4.887, which is half the original size. This can’t be possible, the enlarged image is quite big. I set the resolution at 300, if that makes a difference…
View 5 Replies View Related