I'm inserting dimensions and the tics keep coming out huge and not on the dimension line, in fact there's one on either side 20 ft out. If I change the drawing scale in the tab at a the bottom the tics get smaller and closer in, but they are still off the dimension string by a long shot.
View 3 RepliesI'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedI have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedIs it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View Relatedhow to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies View RelatedIs there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies View RelatedI want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View RelatedIs there a way to make the linear dimension a diameter dimension?
View 9 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedWhen doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View Relatedmy normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
Is there any way to dimension a bent lines?i would like to be able to have just one total dimension of these two lines instead of measuring each line.in my type of work it is not necessary to show dimension of each segment, but would be nice to at least show a total dimension instead.
View 3 Replies View RelatedI moved from acad 2000 to 2009. My crosshair hesitates over every dimension line. Also almost impossible to use grips on the dimension lines. Anyway to turn this off?
View 9 Replies View RelatedIs it possible for AutoCAD to notify you if you have overlapping dimensions.
See sample.
DRAWINGS.dwg
I have made thousands of sheet metal parts and their associated drawings without issue but this time, I made a part and attempted to make a drawing but dimension lines won't attach to certain geometry in the drawing. It acts like it will until I click the second line for the dimension then it errors, telling me the same error message that comes up when you delete a feature that previously had a dimension.
I also can't place an origin for doing a hole chart, for example. It just turns purple and says it isn't attached even though it clearly is.
I have a problem with Inventor 2013. The dimension lines have disappeared. I've been through all the dimension styles and layers to make sure I hadn't turned one off
All other drawings are fine and if I create another even using the same model it works just fine but I'd rather find out why than re-do the whole drawing.
when I draw a shape and add a dimension to it, the text and the numerical and the arrows of the dimension are small, so I have to increase the text height manually
how can I make it automatically scale itself?
also similiar thing with the lines, I tried putting a dashed center line on a shape, it looks solid but when I zoom it it does not.
how can I solve this?
I have a template IDW that i use for bearings. When I opened it today I noticed that two of the dimension lines were missing. The dimension and arrows are there. I tried deleting them are recreating them with the same result.
The interesting thing is, when I created the dim above the part it was fine, when I dragged it below the part the lines went away. After that no matter were I moved it the lines would not reappear.
I installed SP1 a while ago and just now installed the update to SP1 (DL20857064.zip). It did not fix the problem.
Is it possible to hide the dimension lines like in the attached picture?
Autodesk Inventor 2012
We resently upgraded to Inventor 2013 and since then we have been having an issue of dimension and leader lines being hidden under a text box or some other drawing entity.
This is very confusing since the text box does not have a white out associated with it, nore is there a way to put the test box to the back and dimension lines to the front...
It seems like our puppet masters that program this amassing tool where up to something and didn't quite get there.
IT sure would be nice (or an absolute requirement) that this gets fixed so I don't have to learn new hoops to jump through to get a quality drawing out of Inventor.
How can I print a dimension with its arrows but without it's dimension lines?
For example--I draw a rectangle and draw a horizontal dimension across the center of the rectangal. Then I flip the arrows and drag the number to the left outside of the rectangal. I want arrows facing inward from the left and right and the number out to the left. I don't want a line stretched across the center of the rectangal.
I am using AutoCAD 2010 and when i go to print my design to PDF or even to a printer, the dimension lines do not show up. I have checked my layers and the dimension lines are not on defpoints, in fact they are on layer 0. I have tried to create a new layer and it still does not show up in the work space, let alone when i try to print it.
View 1 Replies View RelatedSometimes when I am dimensioning an object, my autosnap will pick up the end of an adjacent dimension extension line instead of the end of the object. Is there a way to prevent that?
View 4 Replies View RelatedHow do I get the measurement and bearing on my dimension lines? Example would be from the Oleson village dimensions.
View 5 Replies View RelatedI am wondering about something called a "dimbreak" command to break demension lines. I heard it has been used in AutoCad. Is it also something available to Inventor users? I can't find anything when I search for it in Inventor and I need to be able to "explode" or otherwise change my dimensions manually so I can break dimension lines as they pass over other dimension lines.
View 2 Replies View Related>In our Autocad we show the dimensions in drawing by parallel lines pointing from start and end point.
Attached Image : 01
>But we want to show the dimensions as following. Currently we have to draw these lines manually.
Attached Image : 02
>Is there any setting/option to show the dimensions automatically marked by orange circle shown as following.
Attached Image : PDF file
Software : Autocad 2012-64Bit , Autocad_LT 2012-64Bit
Hardware : Workstation Dell Precision T3600
For some reason, if I convert an IDW to a PDF, the dimension lines come out very faint.
View 1 Replies View RelatedIm trying to move radial dimension text away from the dimension line so I can add in text between the dimension and dimension line.
#1 is the default style
#2 is what happens when I do "Move text only", it moves the dimension line to inside the radial and I do not want that.
#3 is how it looks when I just manually edit the dimension text
#4 is how I want it to look
#4 is a combination of dimension and a manually added leader with the dimension line removed. How can I move the dimension text on a radial without the dimension line automatically moving to the inside? Or is there another way to add in text outside the box while having the dimension text offset from the line?
Is it possible to break a dimension line as shown in attached jpg ?
It is possible in AutoCAD I know but is it possible in Inventor ?