AutoCAD 2010 :: How To Create Certain Radius Dimension
Dec 12, 2012
Im drawing the image below for school but I cannot figure out how to create the radius dimensions as they shown.
The only ones I know how to do are they .25 and the .75 diameter. I have tried changing the dimension style in every way I can think of. Just to clarify the 1.31 and .63 radius demotion how the leader starts in the center and the arrow is on the inside of the circle yet the text has the extended leader and is outside the circle and the other radius demotions the text is in the middle of the leader is what I am trying to learn to do.
View 3 Replies
ADVERTISEMENT
Jul 5, 2012
When I dimension an arc to find the radius, the dimesnions appears as a line going from teh center of the arc to the edge of the arc with the dimension in the middle. I don't want this. I want a leader pointing to the R text and that's it.
I've attached a photo of both scenarios- one dimension is the style I don't want, and one is basically the style I want (I'd like it to be more of an elbowed leader line), but it only appears when I use AutoCAD's ISO25 dimension style.
View 2 Replies
View Related
Jul 25, 2013
I am new to AutoCad, and I'm sure this is a simple question. How do I put radius dimension in fraction format?
View 4 Replies
View Related
Dec 4, 2011
API enhancement/fix in SP1: Cannot create a radius dimension on circular drawing curves projected from spline edges.Does it in some way trying to refer to the issue with nonplanar arcs turning into splines in drawings saved-as AutoCAD .DWG?
View 3 Replies
View Related
Feb 23, 2013
how to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies
View Related
Sep 26, 2011
I have been able to dimension any circle on the drawing， but if there're several circles with the same radius ,I just don't know how to dimension the circles with the same radius with only one dimension.
View 1 Replies
View Related
Sep 17, 2013
The standard in the industry I work in is the radius dimension goes on the inside of the arc. However, AutoCAD defaults the dimension to the outside of the arc. Is there a way to make it default to the inside? If not then this is the issue when I use the mirror command.
Attachment 44015
That arc appears and I cannot get rid of it.
View 9 Replies
View Related
Jan 4, 2013
I am trying to edit my drawing template dimension style to always do a diameter (if it is a circle). Right now it defaults to radius and I manually right click and change it. I found all sorts of styles for how it displays the radius and diameter, but didn't find where to set the default.
View 7 Replies
View Related
Jul 9, 2012
How do I change this dimension into a diameter dimension?
I have tried editing the dimension style to display as a diameter and it doesn't change it. I tried creating a new dimension style and it doesn't change it.
View 4 Replies
View Related
Dec 3, 2013
I would like to change the default settings for a Radius dimension, Extension value from "On" to "Off".
I have no trouble changing the dimensions one at a time, but that doesn’t change the default value in the template.
View 6 Replies
View Related
May 17, 2007
Having used another CAD program for several years, I was used to the idea that all radius dimensions, like of a given arc, would easily start at the center of the arc, thereby denoting the position of the arc's center.
I'm slightly bugged with some CAD users, even books on the subject by autocad users, that give an arc's dimension from the outside of the arc, yet fail to show the location of the arc's center when it may not be self explanatory. Not good dimensioning practice from what little I've been schooled...
So, in AutoCAD 2007, how do I get an arc's radius dimension line to start at the center and point out to the edge. I can do all kinds of things to the position of the text, etc, but can't figure how to get it to start at the center. (The dimension line needs to start at the center.)
View 9 Replies
View Related
Aug 16, 2013
When you make a diameter or radius dimension it always has this static extension line shown in red when you move the dimension far enough away. I can not seem to extend this extension line at all it is always the same length no matter what variable I change. How to lengthen this extension line?
View 9 Replies
View Related
Jan 26, 2012
Octagon inside a circle... The circle cannot be dimensioned off the octagon?
I need it to have, say .25" clearance and I mean I can just make the circle the right size... but Inventor/I really should be able to do something this simple...
A circle inside a circle, same center point, you can click both and get the distance between the two?
(R-click and set circle to Radius does nothing, it still wants to dimension it from the center point)
View 9 Replies
View Related
Jun 27, 2011
Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies
View Related
Feb 7, 2013
[Managed ObjectARX 2007 with C#]
I am trying to create an arc with start point, end point, and radius. So that if the arc gets drawn, I going to use the center point.
Well, I guess I can use "SendStringToExecute()" or "SendCommand()" and "ObjectAppended" event handler to get the arc object.
View 6 Replies
View Related
Oct 9, 2012
The question is that I want to draw a Circle with the command Tan,Tan,Radius but when I try to find an ellipses tangent, it never shows up. All OSNAP options are on.
View 9 Replies
View Related
Nov 28, 2013
I am trying to create a blend radius between a Line and a Circle, the Blend command does not accept the circle as a valid object.
View 3 Replies
View Related
Jan 22, 2013
If I define the fillet radius in a drawing and close the drawing, then next time I open the drawing, the fillet radius has defaulted back to 0 and I have to redefine it again. Is there a way to maintain the fillet radius in a drawing so that I do not have to redefine it every time I open the drawing?
View 3 Replies
View Related
Mar 26, 2013
I design a small plant in Autocad 2012. For the pipes we used cylinders, now we need to make the bill of materials, but I don't know how to extract the data from each cylinder(radius and height), after I will be able to do this, I can make the material list, but I don't know how and I am having so many cylinders.
View 9 Replies
View Related
Mar 19, 2012
i can't change the radius of a solid body.
example :i made a radius with the command "fillet edges",radius=50 mm.
the next day i decided to cahnge to radius= 30 mm.
i presssed the "ctrl" bottom, clicked the radius surface to change ,but in the properties tab was written "solid face",with no radius change option.
finnaly i delleted the radius face,and made a new solid edge radius.....
is this the only way?
(solidhist variable is set to 1 ).
View 5 Replies
View Related
Feb 18, 2013
The question is if I have designed a part in sheet metal with multiple flanges and one of my edges follow a specific radius. Is is possible to use contour roll or any other means to create a flange on that edge that will allow me to flatten that out. I cant see it being physically possible putting a bend in there as the material would need to stretch and the bend tool would need to follow that radius.
View 2 Replies
View Related
Feb 24, 2012
Changing the curb return radius after the intersection has been created. I am able to go back to the curb return parameters dialog and enter a different value, but once I hit Enter or OK the value reverts back to the one I orginally used.
So it looks like I have to delete the intersection object and re-start the wizard from scratch. Not that it's a big deal, just thought there might be a way to make the change once the intersection is built.
View 5 Replies
View Related
Apr 10, 2012
Is it possible to change the dimension style somehow, such that it adds 3 units (in this case inches).I have a client that wants the neat length of the pipe given above the dimension line, and the length with extra sock below the dimension line.
View 4 Replies
View Related
Sep 27, 2011
I want to have two dimension styles in one dimension line. The first style would be a point to point dimension with the text centered and above the dimension line. The second style would be a running dimension to each point with the text over the second extension line and above the dimension line. Right now I am using two seperate dimension lines, one on top of the other. I'm trying to find a way to combine them into one dimension line so that I won't have to dimension the same thing twice.
At first I thought that using alternate units would work, however I was not able to find a way to seperate the two dimensions. Also, I didn't see how to make the alternate units a running dimension.
View 8 Replies
View Related
Aug 3, 2011
In AutoCAD 2012 My dimension style/scale seems to change automatically. I'll add one dimension in paper space,and then the very next dimension will be in a different style. It will say 30" one time, then 400" the next. Seems like it picks its own scale randomly. It happens with the default dim styles as well as custom styles.
View 9 Replies
View Related
Aug 20, 2012
I am working with a point cloud and want a dimension that will call out the Z value of a selected node. Is there a way to adjust an ordinate dimension to report the Z value instead of Y? If not, is there another way to do this?
View 4 Replies
View Related
Feb 7, 2013
Using (plain vanilla) AutoCAD 2012 I've been getting a funny error: After working normally and without problem for some period, suddenly every time I open a drawing I get an error message that says "AEC dimension: opening / door / window associativity initiation failed". The error appears each time I open another drawing until I shut AutoCAD down and restart it.
View 4 Replies
View Related
Dec 16, 2011
Is there any way to create the angle dimension shown in the attachment without creating a small line in a sketch first?
View 9 Replies
View Related
Sep 15, 2011
I've been trying to create a LinearGeneralDimension on an IDW from one Workpoint to another.
It crashes when i call the .AddLinear
Here is my code snipit.
Inventor.DrawingView dv = FindDrawingViewInSheetByName(sheet, "VIEW12");
if (null != dv) {
Inventor.WorkPoint p1 = FindWorkPointInAssemblyByName(dv.ReferencedDocumentDescriptor.ReferencedDocument as Inventor.AssemblyDocument, "MR1");
[code]...
View 9 Replies
View Related
Oct 24, 2011
how to create the dimension shown in an idw?
View 9 Replies
View Related
Sep 2, 2013
I always put the dimensions and text leaders in model space, is it true if I plan to have 3 different viewport scales, I would have to create 3 different dimension styles for each VP scale, it’s quite hard to predict in advance which VP scale that I am going to use, Let say I am going to use 1/8”=1’ what is the simple math formula to use?
View 3 Replies
View Related
