AutoCad :: Create A Blend Radius Between Line And Circle
Nov 28, 2013I am trying to create a blend radius between a Line and a Circle, the Blend command does not accept the circle as a valid object.
View 3 Replies
ADVERTISEMENT
AutoCad :: Circle Radius Doesn't Match Up With Line Length
Apr 26, 2011I'm trying to plan an access road which must run at least 2.5m away from an existing fenceline. I've put a few parallel road lines in at 3m distance, but at the fence bends I decided to put some circles at the bend points to give me a 3m radius. When I did this I was suprised to find that the circle extends further than my access road. I've dimensioned them both up, CAD is telling me they're both 3m away but they're clearly not at the same distance.
View 9 Replies View RelatedGIMP :: Create Blend Effect In Upper Right Of Circle?
Jan 12, 2014About a year ago I created this picture using gimp (ignore the text) .
My problem is that I have completely forgotten how I did it and now I need to know how.
So how to create the blend effect in the upper right of the circle (again don't worry about the text)?
AutoCad 2D :: Create A Circle From Two Given Tangents And Center-line Axis?
Mar 27, 2013Is it possible to create a circle from two given tangents and a center-line axis? For example, can this RED circle be derived in AutoCAD?
tan_tan_centerline.PNG
AutoCAD 2010 :: Drawing Circle With Tan / Tan / Radius?
Oct 9, 2012The question is that I want to draw a Circle with the command Tan,Tan,Radius but when I try to find an ellipses tangent, it never shows up. All OSNAP options are on.
View 9 Replies View RelatedAutoCAD .NET :: Prompt User To Pick Point On Circle With Given Radius?
Jul 25, 2013I need my users to pick a point p, enter a distance r and a direction v. A new point should be created r units away in vectorial direction. Therefore, the new point is located on an imaginary circle with radius r and center p.
Currently, the user picks the first point and enters a distance. Then, he has to pick another point (Editor.GetPoint with UseBasePoint = true), I calculate the vector between both points, create a new point (with location = BasePoint.location) and translate it d units in vectorial direction. This works of course, but the problem is, that the user doesn't see directly, where his new point is located, since he may pick a point closer to or farther away then r units.
Naively spoken, I want to restrict the line between BasePoint and new point while prompting the user to a fixed length. Native calls to ObjectARX-methods would be also okay.
AutoCAD Inventor :: Sketch / Can't Dimension A Circle From Radius To Interior Shape
Jan 26, 2012Octagon inside a circle... The circle cannot be dimensioned off the octagon?
I need it to have, say .25" clearance and I mean I can just make the circle the right size... but Inventor/I really should be able to do something this simple...
A circle inside a circle, same center point, you can click both and get the distance between the two?
(R-click and set circle to Radius does nothing, it still wants to dimension it from the center point)
AutoCad :: Find Center Of Circle Tangent To Another Circle And Point On A Line
Dec 18, 2011I need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedIllustrator :: Circle Radius Of Known Length?
Feb 10, 2014I'm trying to make a circle with the radius of 200*sqrt(3). Is this even possible? Or will illustrator round the equation to the thousandths? If illustrator will just round the equation to the thousandths, I can enter the number myself, but I was hoping it could find the point.
View 10 Replies View RelatedLightroom :: Map Module Radius Circle Not Showing?
Apr 25, 2012When I create a My Location the radius circle does not show on my iMac running Lion. It shows up on my MacBook Pro just fine.
View 4 Replies View RelatedPhotoshop :: Blend Color Within A Circle?
Jun 20, 2008i am colourwashing a site plan for presentation purposes.
how can i blend within the green circles, as shown on the trees on the attached part site plan?
Illustrator :: Replacing A Blend Spline With A Circle
May 23, 2009I've tried replacing a blend spline with a circle in order to get an easily editable "flowering effect" but it's not working out.
The blend does accept the circle as its new spline, but the start object and end object aren't distributed along the circle equally. The Blend only travels around the circle 270 degrees.
Is there a trick to making this work?
AutoCad :: How To Add Radius / Diameter To A Leader Line
Jun 7, 2011How would you add features like radius, diameter to a leader line?
View 5 Replies View RelatedIllustrator :: Angle Gradient Effect - Using Blend Tool And Replacing Spline With A Circle
May 13, 2009I am trying to acheive the same angle gradient effect that can be done in Photoshop but in Illustrator. The actual thing I want to be able to create as a vector is the graphic attached...
Can this be done by somehow using the blend tool and replacing the spline with a circle?
AutoCad 2D :: Diameter Or Radius Dimension - Cannot Extend Extension Line
Aug 16, 2013When you make a diameter or radius dimension it always has this static extension line shown in red when you move the dimension far enough away. I can not seem to extend this extension line at all it is always the same length no matter what variable I change. How to lengthen this extension line?
View 9 Replies View RelatedAutoCAD 2013 :: Radius And Diameter Dimensions Keep Jumping From Original Line?
Aug 7, 2012My radius and diameter dimensions keep jumping from my original line to another, see attached
View 1 Replies View RelatedAutoCAD 2010 :: How To Create Certain Radius Dimension
Dec 12, 2012Im drawing the image below for school but I cannot figure out how to create the radius dimensions as they shown.
The only ones I know how to do are they .25 and the .75 diameter. I have tried changing the dimension style in every way I can think of. Just to clarify the 1.31 and .63 radius demotion how the leader starts in the center and the arrow is on the inside of the circle yet the text has the extended leader and is outside the circle and the other radius demotions the text is in the middle of the leader is what I am trying to learn to do.
AutoCAD .NET :: Create Arc With Start / End Point And Radius
Feb 7, 2013[Managed ObjectARX 2007 with C#]
I am trying to create an arc with start point, end point, and radius. So that if the arc gets drawn, I going to use the center point.
Well, I guess I can use "SendStringToExecute()" or "SendCommand()" and "ObjectAppended" event handler to get the arc object.
AutoCAD Inventor :: Sheet Metal - Create Flanges On A Radius
Feb 18, 2013The question is if I have designed a part in sheet metal with multiple flanges and one of my edges follow a specific radius. Is is possible to use contour roll or any other means to create a flange on that edge that will allow me to flatten that out. I cant see it being physically possible putting a bend in there as the material would need to stretch and the bend tool would need to follow that radius.
View 2 Replies View RelatedAutoCAD Inventor :: Cannot Create Radius Dimension On Circular Drawing Curves Projected From Spline Edges
Dec 4, 2011API enhancement/fix in SP1: Cannot create a radius dimension on circular drawing curves projected from spline edges.Does it in some way trying to refer to the issue with nonplanar arcs turning into splines in drawings saved-as AutoCAD .DWG?
View 3 Replies View RelatedAutoCad :: Get The Line To Connect With Circle?
May 24, 2012I have a little problem with trim in autocad 2012. After trimming some lines that cut through a circle there's a big gap between the circle and line, so there's no way i can create a polyline. How do I fix it?
here is the figure w/o trimming
pic1.png
Here it is after trimming
pic2.png
And as you can see there is space between the lines. How can I get the line to connect to the circle?
pic 3.png
AutoCad :: How To Scale Every Line / Circle
Aug 21, 2013I am trying to draw the part as shown in attachment. I started off with the base rectangle whose dimensions are 120 * 42. After zooming out completely, it's still too big and takes the entire screen space. If I draw the rectangle and scale it, say by .5, would I have to scale every other line/circle that I draw from there on individually? Or is there a more efficient way to do this?
View 4 Replies View RelatedIllustrator :: Drag To Create A Line - Line Appears But When Click To Create Another It Disappears
Oct 26, 2013I'm trying to make a rainbow.
I'm using the line tool but when I drag to create a line the line appears but then when i click to create another line it disappears.
AutoCad :: Circle Touching A Line And A Point
Apr 15, 2012I would like to know how to make something like what I attach below.Its a circle with radius 112, touching a point on the corner, and the circle must touch some point on the line above precisely.
View 5 Replies View RelatedAutoCad :: How To Make Circle Perpendicular To Line
Feb 8, 2011I am trying to make a circle perpendicular (at its midpoint) to the end of a cylindrical helix in 3D space. I tried using the perpendicular geometric constraint but it won't let me (says "invalid selection"...). Is there a way to make the ucs (z axis) tangential to the end of the helix?
View 4 Replies View RelatedAutoCad :: Force Dimension Of A Line / Circle
Sep 29, 2011If there is a way to force the dimension of a line or circle or anything.
For example: If I draw a line and dimension it, it will dimension it to 2.973 let's say, but if I want to change the dimension or the line to 3.300, how would I do that?
Also, after you create a 2D drawing, is there a way to make it a 3D model or extrude the model?
AutoCad 2D :: Draw Circle So That Line Becomes Tangent To It?
Feb 20, 2013I’ve an already drawn inclined line from a fixed point (saypoint (0,2) on Y-axis). The inclination is also fixed (say 150 tothe horizontal). My objective is to draw a circle with one quadrant at a fixedpoint (say point (1,0) on X-axis), so that, the line becomes a perfect tangentto the circle. The diameter of the circle may vary to make the line perfecttangent to the circle.
View 9 Replies View RelatedAutoCad 3D :: Error / Geometry Or Topology At End Of Blend Too Complex / Failed To Perform Blend
Mar 14, 2012im having trouble getting the fillet edge command to work. Ive never had a problem with it before but now i get <Modeling Operation Error:
geometry or topology at end of blend too complex Failed to perform blend.Failure while filleting.>
why its not working.
AutoCAD Inventor :: Constructing Line Segments Across Circle?
Nov 25, 2011Trying to get evenly spaced line segments that lie on the circumference of a circle - every time I do the pattern repetition it gives me line segments the same length instead of constraining them to the circumference of the circle ?
View 1 Replies View RelatedAutoCAD Inventor :: Intercept Dimension Between A Line And A Circle
Oct 30, 2012I am trying to make a intercept point with dimension between a line and a circle and i can't figure out how to do it.
View 2 Replies View RelatedAutoCad 2D :: Keep Cable Line Of Crane Always Tangent To Circle?
Jul 18, 2012I am attempting to keep the cable line of the crane always tangent to the circle at the top of the crane. The length of the crane (including the circle at the top) is being polar stretched but i am unable to keep the cable tangent to the top circle as i stretch and rotate the crane.
View 6 Replies View Related
