I have to deal with the plans of others, some who change the dimensions through text formatting that I can see are fake or incorrect. I used to have a command that would detect the ACTUAL dimension but I can't seem to find it in ACAD 2010. find the command to restore the true dimensions?
View 3 RepliesIs there a way to show the last number of the dimension length as 5 or 0?I want to show the unit in mm with precision (decimal places) equal zero such that the and to force the last number as 5 or zero
For example, I need to display the 7554 mm as 7555 and the 7558mm as 7560.
I'm trying to get everyone on the right page, but I can't find any reference to how to properly show a dimnesion that spans across 2 different drawings (with use of a matchline or on a piping isometric that is split). Would either of these examples be the correct way to show a dimension that spans 2 drawing files? Is there a different way to show a dimension that is to span 2 drawings?
View 1 Replies View Related1.what command open the Dimension style Manager ?
Ans- a)DSM b) DS c) DIMSTYLE d) DDIM.
I have all my dimensions on a single layer but when that layer is turned off, the nodes for those dimensions still appear and are selectable. I looked through the system variables and couldn't find a setting that controls this. How can I prevent the display of the nodes?
View 2 Replies View RelatedAm trying to use millimeters for the first time. In model space, I set UNITS to millimeters. I draw a 5 unit line. No problem. I go to a layout tab and the viewport shows a 5" line, using a 1:1 scale. How do I make the viewport show a true 5mm line? If I choose inches as my units, the viewport scale is true 1:1 scale
View 7 Replies View RelatedHow can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View RelatedWhen I try to plot a pdf of my drawing, the elements are distorted (circles larger, plines thicker, etc). How can I convert to a true pdf? I have AutoCAD 2012 student version.
View 3 Replies View RelatedLast week I downloaded the Autodesk Design Review and for some reason I installed the DWG TrueView as well. Now, every time I open up a .dwg through explorer, True View overrules AutoCAD and thinks it has to be the one to open the file. Is there any way to turn this program off?
View 5 Replies View RelatedI am trying to export a file for my printer and my CMYK colors are not looking right on the exported file, they are very dull and the colors are not the same at all.
I have changed my DRAW files to be ONLY CMYK colors and have experimented with the Color Management tool to no use at all and reset the workspace.
For example: the blues that my client chose are C56 M0 Y6 K0 and C30 M0 Y60 K0 - they look great onscreen, but once I export to a jpg/eps/tif/etc the colors dull down and don't match at all!
When a new blank file is created at given dimensions ( say 6 x 4 inches) the actual dimensions on screen and the ruler appear approx. 1.333 times smaller than the actual size ( 4.5 x 3 inches ) .How can I correct this?
View 6 Replies View RelatedHow can I print in black and white while using true colors? I've tried the monochrome ctb, monochrome stb, looking for solutions in these forums, etc. The std 255 colors are not a problem. It is only when I use a true color. When I tried the monochrome stb setting, the fill color on my multileaders did not change.
Also, in paperspace, with viewports that had solid objects in them, I used to be able to print and have hidden lines removed without them showing up that way in the viewport. (used 2008 at the time and have jumped from that to 2012)
I seem to remember that the was a variable command that controlled this but I can't remember it.
When I plot to paper from TV2012, I'm good with monochrome - black lines, white background - awesome.
I would *like*, however, to plot a few things to PDF, but retain the view I have on my display - I.E., lines/labels of various colors and a BLACK background. I've been poking around for a bit, and if there's a way to make that setting, I'm no finding it. Everything I try has gotten me colored lines/labels on a white background.
I have an autocad drawing that has a building floor plan.
I need to "rotate the building 90 degrees" or "rotate the USC 90 degrees" in order to line the building up to TRUE project north (architect has a Revit model oriented to true north that I need to match when we combine our files in Navisworks)
I have tried DVIEW > Twist.. which I thought was it, it rotated my drawing, but the USC rotated with it. I tried the USCFOLLOW with no luck.
Also tried going into UNITS > DIRECTION and tried VP with no luck.
I understand that I can just select the entire floor plan and manually rotate it BUT, the building is not easy "shape" to work with, so it is next to impossible finding the "center" of my drawing to rotate it (I need this to be brough into Navisworks WITHOUT rotating the file again)
You would think this would be very simple to do and take 30 seconds. I have googled everything with no luck. I just need to change my True north
- doing this in modelspace
- needs to be align with a Revit model already oreinted to true north
- just need to rotate the drawing OR UCS 90 degrees, but can't find the "center" of the drawing
'developing' or 'unrolling' or 'finding the true shape' of a 3D surface? Something similar to Robert McNeel's Rhino3D's UnrollSrf command to flatten a surface. (Is a mesh better?)
I am drawing the frames for a wooden surfboard which has curved spars (the surface in question) which need rolling out flat to make a template. The surface is curved in the XY axis only, so in theory it should be developable.
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
I would like to show such a dimension, like S1 in attachment. It is really value of tolerance of nominal 0 dimension.
View 2 Replies View RelatedCommand line for Dimension Fit
View 1 Replies View RelatedIf I type the command UNITS and change the insertion scale to millimeter (mine was inches), what is going to happen? At first i used inches to draw 5 inches line and the get the dimension of it, second i drew again a line using the millimeter in units, but when i measured it still it is exact to the first line that i draw.
View 9 Replies View RelatedIs there a command to break a line or dimension, to show that not all of the line is displayed or where the length is not important or undefined?
View 4 Replies View RelatedWhy are annotative dimension always placed in model space to the created height regardless of the annotation scale I use. using annotation 1:1 or 1:10 or 1:50 my dimension is always inserted to the dimstyle hight of 3.5mm (about 1/8") and not 3.5 x annoscale example 10 = 35mm.
When dimensions are placed using an anno scale of 1:1 and than change the anno scale to 1:10 the dimensions and dim arrows ect are scaled to the correct size 10x value preset in the dimsyle. My text style is non associative and set to 0.0 height.
The only way i can place dimensions to the preferred height is linked to the anno scale is by setting the text style height 3.5 (about 1/8"). but the problem here is that the dim text height will be displayed to selected annotation scale of 1:10 but the dim arrows etx are not to size. I know that setting the text style hight is not the correct way and see why.
All my dimension styles are annotative and and have the ANNOAUTOSCALE set to 1. I have also tried by presetting the object anno scale to the preferred annotations.
Usually when we enter RECTANGLE command, AUTOCAD will ask us to specify first corner point, then it will ask coodinate of second corner point.
Can the RECTANGLE command be set to straightaway insert dimension instead of coordinates?
Previous computer I used could do this, but this new computer can't. I don't know where to set it. Both computer using the same version of AUTOCAD LT2013. I reckon it could be set, but how?
How do i get the leading zero to show on an angular dimension for the seconds? as in: 108d 36' 03" ?
View 1 Replies View RelatedI want to be able to use the same dimension parameter as a previous component pattern to create a new component pattern. Is there a way to be able to do this? On features, you can use the Show Dimension and then select the dimension you want. With rectangular patterns I don't see a way to do this and there is no way to even note which parameter it gave it as it is being created. I guess I could name the parameter on the fly and then use that same name, but was wondering if there was a different way.
View 2 Replies View RelatedI have a drawing with a detail, I want to hide dimension from the big view port and show it in the detail as you can see in the picture:
I use Annotative dimension.
All I want to do is rotate one dimension. I want to leave all the others alone.
When I am editing my drawing, I double click on the dimension and get the diag box and unfortunately the rotate dimension command along with the degree box is grayed out.
is there any way I can place dimension on drawing that would be in dual units (in decimal degrees and in deg min sec)?
I did not find this possible so far.
This is the first I've noticed this, but a sketch in an assembly does not allow to show the dimensions as an expression? In a .ipt sketch you can right click and the pop-up menu has an option to show the dimensions in different forms. I do not get this in an assembly sketch.
I do not know if this is me or not. It's just curious that it does not do that.
Is there a variable to force dimension text line to show? I am using annotative dimensions and the placement for the text is forced to the outside of the dimension if it doesn't fit. I get annoyed on having to move the text to show the dimline above the dimension.
View 3 Replies View RelatedI am familiar with the LAYMCUR command to select an object and make that layer current. I am hoping there is a command to select text or a dimension and make that style current. I can't fine such a command. I have to select a text, see what style shows up in the box at top, go to the text style box, find the style and make it current. It seems like unneeded steps. It's simple for layers, why not text and dimensions?
View 3 Replies View RelatedI have a block of a guide sign with directions and azimuth angles. I made arrows rotatable and angles were changing ok. But when I try to rotate an arrow into zero position, dimension shows 180. I need the dimension to show 0 degree. How can I do it?
And I can’t make angular dimension show degrees greater than 180 even if I specify vertex – after rotation angle shifts on the other side. I gave up and used back azimuth.
And I can't make an attachment: "The contents of the attachment doesn't match its file type"?