AutoCAD Inventor :: Setting Dimension Method Selectively
Jul 16, 2013
Looking for the method to query oDrawingDims.Tolerance. to see if SetToSymmetric (.0625) is the current value for a given dimension.
oDrawingDims.Tolerance.Type results in 50377984, no matter what method is active in the dimensions.
From Here. You get the Loop to reset,
'symmetric example' Set a reference to the select set of the active document.
DimoDocAsDrawingDocumentoDoc=ThisApplication.ActiveDocument' Find all selected occurrences and add them to an ObjectCollection.DimoDrawingDimsAsDrawingDimension'Loop through all dimensionsForEachoDrawingDimsInoDoc.ActiveSheet.DrawingDimensions'set Tolerance MethodoDrawingDims.Tolerance.SetToSymmetric(0.5)Next
As well as this code to reset to default if a tolerance falls with in a certain set values,
' Set a reference to the select set of the active document.DimoDocAsDrawingDocumentoDoc=ThisApplication.ActiveDocument' Find all selected occurrences and add them to an ObjectCollection.DimoDrawingDimsAsDrawingDimensionForEachoDrawingDimsInoDoc.ActiveSheet.DrawingDimensions'Loop through all dimensionsIf oDrawingDims.Tolerance.Upper = ("0.15875") And oDrawingDims.Tolerance.Lower=("0")oDrawingDims.Tolerance.SetToDefaultEndIf
Next
View 6 Replies
ADVERTISEMENT
Jan 18, 2012
What is the data type for the second parameter of retrieve dimension method? Coz it's optional parameter.Retrieve(ViewOrSketch as Object, [DimensionToRetrieve]) as GeneralDimensionEnurator
We've tried to put the parameter name of the model as parameter but error had occured "DATA TYPE MISMATCH".Here's our
Call osheetDetail.DrawingDimensions.GeneralDimensions.Retrieve_(oTopView,oModel.ComponentDefinition.Parameters.Item(10).Name)
View 2 Replies
View Related
Feb 14, 2005
Any method to set all the Tolerance Types for a GeneralDimension via VBA.
The Tolerance object, accessible via the GeneralDimension object, offers methods to set Deviation, Fits, Limits & Symmetric tolerance types, but I can’t find a way to set other Tolerance types, such as Reference, Basic, Max & Min
View 3 Replies
View Related
Apr 5, 2012
Autodesk Inventor 2010 .idw Drawing Detail - Where is the default setting for "Full Dimension Line" so that I can set it to always be on when placing a linear diametric dimension? I would prefer to turn it off on the few occasions when dimensioning a diameter on a Detail View that does not include the center line rather than each and every diameter on a section view. This is necessary because a diameter symbol does not show up in the diameter dimension unless the full distance line it is selected, which is not always possible. I am aware of the Application Option setting that allows Linear Diametric as a preference, which becomes the default for all dimensions, and it is user specific rather than document specific.
View 2 Replies
View Related
Apr 5, 2012
We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
View 9 Replies
View Related
Feb 6, 2013
Is there an automatic method of extracting all the presets, settings, etc. from every program in the Adobe Master Collection 5.5?I am about to regenerate my Operating System Partitions from scratch & do not want to go through setting up each & every program in the master collection by hand.
View 3 Replies
View Related
Oct 12, 2012
Can I use box-counting method to calculate fractal dimension in Photoshop CS6?
View 4 Replies
View Related
Jan 10, 2012
i'm making an isometric drawing. so i use oblique command everytime i need to convert dimension oblique at 30 degrees. is there any setting that the default system gets to this oblique thing so the action of selecting Dimension> Oblique doesn't need to be repeated? just like we switch ORTHO on and off , is there a setting for oblique dimension on or off too? i'm using autocad 2010 LT
View 8 Replies
View Related
May 9, 2012
what dimension setting controls the distance in which dimension text is offset when it doesn't fit between extension lines.
See attached image for example.
View 9 Replies
View Related
Feb 27, 2012
Setting a lineweight for the dimension objects,As the dimension object contains: text, dimension line and extension line and behaves as a block, then why the arrowhead (oblique) of the “dimension line” doesn’t follow the lineweight chosen for all the dimension objects?why the "arrowhead" (oblique) is thicker than other dimension elements?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Sep 23, 2013
What is the ideal dimension style setting for metric say 1:100 scale. See my setting on the attachment.
View 8 Replies
View Related
May 28, 2013
I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies
View Related
Feb 23, 2013
how to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies
View Related
Jun 27, 2011
Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies
View Related
Jan 27, 2012
Is there a way to make the linear dimension a diameter dimension?
View 9 Replies
View Related
Aug 26, 2012
Revit 2010.I'm trying to change the temp dimension size. (Can read the 8pt.?) I've looked at the .ini file and don't see where I can change it. I've also read where it can be changed via some 'option'. Under which tab and panel is the 'option'?
View 5 Replies
View Related
Jul 7, 2006
i have a problem in Inventor 10 with the add method, which i didn't have in inventor 8, it's very puzzling. I open an assembly, add some parts (this goes without problems) then i open another assembly, change some stuff,close it again, so i'm back in the first assy and then the next add method fails.
Public Sub AddOccurrence()
' open assy
Set oAssy = ThisApplication.Documents.Open("C:TempAssy.iam", True)
' Set a reference to the assembly component definition.
Dim oAsmCompDef As AssemblyComponentDefinition
Set oAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition
[code]....
View 6 Replies
View Related
Dec 31, 2012
I am trying to display the Tags and Values of an inserted AutoCAD block in an Inventor 2013 dwg. I am using .Net studio10.I can list the properties of the block object but cannot get the "GetPromptTextValues" method to work. Problem is at the bottom of the code listed below.
' Connect to a running instance of Inventor.Dim invApp As Inventor.Application' Check to see if a drawing is active invApp = System. Runtime. InteropServices.Marshal.GetActiveObject("Inventor.Application") If invApp.ActiveDocument.DocumentType <> Inventor. DocumentTypeEnum. kDrawingDocumentObject Then MsgBox("Need to have a drawing document active")Return End If ' Create ref to active drawing document Dim oDrawingDoc As Inventor.DrawingDocumentoDrawingDoc = invApp.ActiveDocument.
[code]....
View 9 Replies
View Related
Apr 30, 2009
While looking at the different tolerance methods, I see a couple called MIN and MAX, which just tack these words to the end of the dimension. Is there a way to customize the tolerance methods to add suffixes or prefixes to dimensions, such as TYP or 2 PLCS or something like that, so that I can minimize my detailing time.
View 5 Replies
View Related
Jul 14, 2012
Basically a project could contain one idw file, or it could contain 20 idw files or 100 or more.
Our titleblock has about 12 entries of project information that will be consistent on all sheets whether that's one sheet or a 1000 sheets.
Is there a way to link an excel file to each idw? (I'm pretty sure not : ) ) or some way to have a central repositor for those properties so that if something changes, we don't have to go back and change each idw?
I have seen the drawing transfer management wizard, but it seems like overkill to a situation that has to have existed a long time - that being needing customer info on a titleblock. Seems like it'd be the perfect think for linking an excell file or having actual properties in the project file.
View 8 Replies
View Related
Apr 5, 2013
I would like to introduce a macro to handle the skeletal method.
[URL].........
View 1 Replies
View Related
May 22, 2013
I need to get familiar with the Inventor API for my thesis.Currently, I need to extend the face of a part.I started with selecting the face edge by
Dim ActiveDocument As Inventor.Document
Dim spline As Object
Set spline = ThisApplication.CommandManager.Pick(kPartEdgeFilter, "please choose the face edge!")
This is working fine.I know that the next step would be to use the ExtendFeature method of PartFeature, but I do not know exactly how to do this. Do I need to get the face as parent of the edge? How can I invoke the extesion then?
View 2 Replies
View Related
Jun 3, 2013
I've seen things about getting the information from the parts in the BOM list, but not about seeing what is present in the structure itself
View 1 Replies
View Related
Jul 14, 2013
Is there any better method to find the overall size of a part model? I tried Range Box method and that gives some inaccuracy if the model have loft feature and fillet on that. But if I use GetExistingFacets the size gives more accurate. At the same time in a round part model with a cut, the GetExistingFacets give inaccuracy and range box method gives better result. Below is the X, Y, Z sizes of the two models with the above mentioned methods.
Round Part (Part1)
Measured with GetExistingFacets method = 129.934196472168 x 126.422719955444 x 25
Measured with Range Box method = 130 x 126.514225996919 x 25
Rectangular Part (Part2)
Measured with GetExistingFacets method = 300 x 300 x 30.0000286102295
Measured with Range Box method = 300 x 300 x 30.4094903224854
find attached part models which I used.
View 9 Replies
View Related
May 7, 2013
Is there a way to selectively pixelate specific content in an image such as: code, face, etc?
When I go to Filters > Blur > Pixelize, it only gives me an option to preview the changes, but no option select which part/parts of the image to pixelate.
Gimp version: 2.8.4
OS: Windows 8
View 2 Replies
View Related
Apr 26, 2013
When I am in the develop mode, and I want to darken, or lighten the background, or the fore ground, or anything in the picture. Do I use the Radial Filter, or the adjustment Brush? How to use both of these tools?
View 6 Replies
View Related
Jul 11, 2013
I want to change the selection method to feature priority.
Where is the button?
Not in the right click
View 3 Replies
View Related
Oct 12, 2011
Is there any way to make it so that when I move into wireframe display or edged faces, only the selected object is rendered that way? I don't want everything getting in the way and confusing me with a jumble of wires.
View 1 Replies
View Related
Feb 19, 2013
I have found that if I use the drop-down to select a new part file, it does not use the default (and only) part template in my templates folder. I know this as there are several settings that do not match. If I click on the icon to open the new part dialog, it displays my templates (part, assy & drw) and creates the new file based on those accordingly.
Any setting that needs to be changed to correct this behavior?
View 3 Replies
View Related
Nov 28, 2012
Please see attached image (I have tried to attach the part file but file size is to large to upload). I have created a sheet metal part, then converted to a solid component to utilize the bend tool. The actual part will need to overlap at the ends and will be joined using spot welds. I would like to be able to illustrate the overlap in the inventor model if possible but how to achieve this.
Before I call it a day and revert to AutoCAD or sketch this into a IDW,
View 9 Replies
View Related
Apr 8, 2011
I got a macro job for creation the drawing for a part. I got a lot of problem.
1/ The first one is move view:
I already create a view (e.g. oIsoView), now I want to move it to the left.
I find the DrawingView.Position method, how can I use this method? I try many time, but it's not successful yet.
Do I need to use the SelectSet method??????
View 9 Replies
View Related