AutoCAD Inventor :: Templates Not Used Depending On Method Used To Create New Part File?
Feb 19, 2013
I have found that if I use the drop-down to select a new part file, it does not use the default (and only) part template in my templates folder. I know this as there are several settings that do not match. If I click on the icon to open the new part dialog, it displays my templates (part, assy & drw) and creates the new file based on those accordingly.
Any setting that needs to be changed to correct this behavior?
View 3 Replies
ADVERTISEMENT
Aug 29, 2013
we have just upgraded from Inv 2011 to 2013. I am trying to create the drawing templates in 2013 by using the blank 2013 template and then copying our border from 2011 onto it. This works a treat apart from 1 thing.
The i properties do not get copied over as well so the sheet is blank from drawing number, title and the custom properties etc.
View 6 Replies
View Related
Oct 6, 2012
I want to draw a line between the two sketches visible on the image below. The line should be in the plane visible. The starting point of the line should be from wherever the top sketch intersects the plane of the current sketch. The finnish point of the line should be wherever a line of the bottom sketch intersects the current sketch plane.
There is no tooltip appearing that would allow me to quickly "attach" the starting line to the correct position. Is there such an aid, and how do i turn it on?
View 1 Replies
View Related
Jul 14, 2013
Is there any better method to find the overall size of a part model? I tried Range Box method and that gives some inaccuracy if the model have loft feature and fillet on that. But if I use GetExistingFacets the size gives more accurate. At the same time in a round part model with a cut, the GetExistingFacets give inaccuracy and range box method gives better result. Below is the X, Y, Z sizes of the two models with the above mentioned methods.
Round Part (Part1)
Measured with GetExistingFacets method = 129.934196472168 x 126.422719955444 x 25
Measured with Range Box method = 130 x 126.514225996919 x 25
Rectangular Part (Part2)
Measured with GetExistingFacets method = 300 x 300 x 30.0000286102295
Measured with Range Box method = 300 x 300 x 30.4094903224854
find attached part models which I used.
View 9 Replies
View Related
Nov 28, 2012
Please see attached image (I have tried to attach the part file but file size is to large to upload). I have created a sheet metal part, then converted to a solid component to utilize the bend tool. The actual part will need to overlap at the ends and will be joined using spot welds. I would like to be able to illustrate the overlap in the inventor model if possible but how to achieve this.
Before I call it a day and revert to AutoCAD or sketch this into a IDW,
View 9 Replies
View Related
Apr 8, 2011
I got a macro job for creation the drawing for a part. I got a lot of problem.
1/ The first one is move view:
I already create a view (e.g. oIsoView), now I want to move it to the left.
I find the DrawingView.Position method, how can I use this method? I try many time, but it's not successful yet.
Do I need to use the SelectSet method??????
View 9 Replies
View Related
Jan 11, 2012
A workflow that works great for me is to create parts (Make Part command) from a multibody solid. The dialog window presents one with an option to choose other Templates (I have a few), BUT I have to choose the template I want to use EACH time I create a part. That is, Inventor doesn't automatically remember the last Template I chose, it defaults to the Standard.ipt or Standard.iam.
Is it possible to set it so that Inventor remembers what Template I chose the last time so that I don't have to choose it every time I Make Part?
View 9 Replies
View Related
Nov 21, 2013
I need templates with different Part List settings in the same project. The Part List is set either for frame construction or for regular assembly.
I cannot use them both in templates due to Style conflict and should alter the Part List table manually. Is it possible to bypass this somehow?
View 9 Replies
View Related
Jul 6, 2012
Is it possible to link one part file dimension to another part file?
1. Part first is a cylinder in parametric table i changed it,s name OD , ID and thk. ( find attachment )
Cylinder ID is ( ID=105)
2. Then i made 2 nd part whose step od ( od=102) is going to insert in to cylinder id.There is 3 mm clerance every time
3. So i have to make equction in 2 nd part that ( Step OD= ( ID-3).
means next time when i will change ID of cylinder OD of 2 nd part will ger changed automatically minus by 3 mm than id of cylinder.
View 3 Replies
View Related
Apr 10, 2012
i.e., is it possible to create a custom iproperty which would enable the user to attach a particular attribute to every component within an assembly without manually going through each component.
For example, If I have a pipework sub-assembly within a manifold assembly. I want to create a custom iProperty for 'Component Type' which would be called 'Pipework' for every component called up within that subassembly.
Likewise for a frame could you have the above custom property attached to every component but called up as 'framework' instead etc.
View 2 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Sep 11, 2013
The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 1 Replies
View Related
Dec 14, 2012
I have a .png file that I want to place in a template. This png file is text with a transparent background. When I place this in my template, the background is shown in white. The sheet color the idw is beige, so this doesn't look very good.
Also, when I save a copy of the idw as .dwg, the white background is shown there as well. when it prints, it is ok. If there was a way to have it stay transparent in both?
View 3 Replies
View Related
Mar 15, 2013
I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.
View 2 Replies
View Related
May 29, 2013
how to make up an air bellows assembly which moves depending on the position. As opposed to a cylinder where making it a flexible asembly works, an air bellows does not need to move axially.
I have two plates hinged and the bellows needs to squeeze and move as they open. The ends are of course fixed to the plates, so the movement is actually an arc.
View 3 Replies
View Related
Nov 3, 2013
I'm trying to design a linear bearing that is composed of a billet of material to which six ball bearings are bolted. I was able to create a part representing the ball bearing from the manufacturer's dimensions. I then modeled a lock washer as a part, then an assembly consisting of a ball bearing and a lock washer. I then created an assembly from that assembly, with six of these ball bearing/lock washer assemblies in the desired orientations.
Now that I have the ball bearings oriented in space the way I need them, I need to model the billet to which they will all mount. I did things in this order because the ball bearings are metric, yet the rest of my design is in imperial units, and it just seemed easier to orient the bearings (which will interface with yet another assembly that I have yet to design) first.
I'd like to create my billet using the assembly as a reference. The assembly will tell me where I need holes in the billet to mount the bearings, where I need to cut out material for clearances, etc. I can't figure out how (or if) I can import my assembly into my part file, or what other tools are available to accomplish this task.
I'm attempting to model something similar to this. I've got the six bearings oriented in space, now I need to make the block to which they mount.
View 5 Replies
View Related
Sep 24, 2012
I want to import some of the iproperties of one ipt file into an iam file.how to do it.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 9 Replies
View Related
Dec 13, 2013
Describe the external referencing of a part file by an assembly file? I keep getting confused between part file and an assembly file.
View 2 Replies
View Related
Aug 28, 2013
Looking for example macro that can create a new sketch, add a few lines and arcs, Then revolve the sketch around an axis to create a solid part. For example a shaft?
View 2 Replies
View Related
Nov 28, 2011
Can we have a better way to create “text” in the Inventor part drawings?
I almost create “text” in every part drawing in different view. I have to create a sketch first, than create a text and dimension the text so I can lock the text in position, otherwise when you move the view and the text will stay in different location.
I had been used “Solid works” for long times. When I need to create a text, just click that view and create a text and the text will stay with that view, whatever you move that view and the text move together.
View 2 Replies
View Related
Jan 12, 2014
it's possible to create a derived part using only some of the features of the base components i.e. I've got a funny shaped part with a bunch of holes in it, and I need another part with exactly the same shape but totally different holes (location and size)I know you can do this with the different solids in the part (only use some of the solids) but I haven't been able to figure it out with features, if it's possible at all.
I could probably create one base part (just the shape) and derive both parts from that, but then I've got a part lying around doing jack.using IV 11.
View 5 Replies
View Related
Jul 15, 2013
I am trying to use Create Simplified part and during the creation process..I downloaded a model of a FD breaker off the Eaton Website in .stp format. I am simply trying to get a .ipt file of the model for my layout model.So the steps I did:
1- Open .stp file
2- Save .stp file as an .iam inventor file (ignore the prompt box "this is not a part file", that is from my logic rule for a part file)
3- once saved in inventor format, I click the simplify tab, select create simplified part, select a name and directory and press save
4- the .iam saves into a single part, BUT it is saved as sean.ipt, not the part number I assigned earlier and it is saved to the directory C:Users, not the directory I assigned in the dialogue box earlier.
Why does it do this every time I "dummy" down an assembly to a single .ipt file?
View 6 Replies
View Related
Nov 19, 2012
I want to ask if in Autodesk Inventor 2013, can we create a part with a different configuration?
example:I made a cube the size of 10mm x 10mm x 10mm, after which it would be revised measures 15mm x 15mm x 15mm. The second revision to change the size of a 12mm x 12mm x 12mm.
Can all the revision is done in one file?And if I want to revise again be 10mm x 10mm x 10mm, can?
Have I been that provides revision always create a new file and the file number so much that hard to figure out which revision. I am still learning Autodesk Inventor 2013.
View 2 Replies
View Related
Oct 5, 2012
I'm starting with a tube and want to add a weld build up around the OD on both ends. I mainly want to do this so that when I create a sectioned view on a drawing, you can see the difference in hatching between the original tube and the weld build up. I've had to create sketches on the drawing up to this point.
The photo I've attached shows the tube and shape of the weld build up. the green line is where I would like the tube OD to be, and the weld build up would be everything above that.
I'm using Inventor Pro 2013.
View 3 Replies
View Related
Mar 8, 2013
I need to create a hole table for a part. I would like the origin to be at the center of the part. Problem is there is not a round hole at that location. Attached is a similar part. The one that I am doing is much larger and has many more holes... this is just an example.
How can I pick this as the origin of my hole table?
View 3 Replies
View Related
Dec 6, 2011
I would like to link a cell value in excel with the partnumber from a assembly in Inventor. How can I made this link?
View 1 Replies
View Related
Jul 26, 2012
I would like to create string that would be tied to a rod and wrapped around an axle. Then when the rod is moved the string rotates the axle, but the string continues to grow as it is being pulled.
View 2 Replies
View Related
Jan 19, 2012
Using Inventor 11 I wish to create some individual parts using Structural Shapes from the Content Center as the basis for my sketch profile and extrude to length before doing other machining.
Is it possible to do this from the Part environment directly and not use the frame generator?
View 4 Replies
View Related
Apr 20, 2013
I like to change the dimension of the length from 388mm to 400mm to represent another similar part with another part number. Yet I still need the old part.
What is the easiest way to do so? When I use 'save as" and then change the dimension, I need to recreate the dimensions in the dwg files. Is there a way to avoid creating the dimensions?
View 3 Replies
View Related
Nov 2, 2011
I want them to appear as a one of the choices in the box after you click NEW (part, drawing, assembly) asside of standard options?
View 1 Replies
View Related
