AutoCAD Inventor :: External Referencing Of Part File By Assembly File

Dec 13, 2013

Describe the external referencing of a part file by an assembly file? I keep getting confused between part file and an assembly file.

View 2 Replies


ADVERTISEMENT

AutoCAD Inventor :: Import IProperties Of Part File Into Assembly File?

Sep 24, 2012

I want to import some of the iproperties of one ipt file into an iam file.how to do it.

IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit

View 9 Replies View Related

AutoCAD Inventor :: Part Inserted In Assembly File As Tube And Pipe Run Part?

Mar 28, 2012

Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.

View 3 Replies View Related

AutoCAD Inventor :: Part Created In Assembly Does Not Update To Part File

Nov 15, 2013

New user 2014

Part created in assembly does not update to part file.

View 9 Replies View Related

AutoCAD Inventor :: Part And Assembly File Dependencies?

Sep 14, 2012

Is there anyway of finding out a part or assembly files dependencies external to inventor without using vault?

View 1 Replies View Related

AutoCAD Inventor :: VBA Location Of A Part In An Assembly File

Nov 7, 2013

Is it possible to identify the location of a part in an assembly file?

I cannot access (or find access to) global locations, just local.  You may ask, whats the problem?  Well, right now, I have 10 subAssemblies and they are all "located" at (0,0,0), which means I have 10 solids sharing the exact same space. This problem can be easily fixed if I can compare the Global Origin to a Local Origin, but I can only find the "work axes origin" which is worthless to me.

View 2 Replies View Related

AutoCAD Inventor :: Assembly To Part File Linked Parameters?

Jan 22, 2013

My goal is to open have people go into a central assembly file, type in their specific parameters and the various part files update within the assembly. I wish to do this without the need for an excel sheet, but when I try to link the parameters from the assembly file to the part files, it will not allow me to insert these parts. I get an error about an "assembly can not be placed into itself."

Iparts will not work as this has an infinite amount of sizes.

View 3 Replies View Related

AutoCAD Inventor :: How To Precisely Move A Part In Assembly File

Jan 30, 2013

I have finished all my parts and now i have to assemble them. I normally just use the constrain tools, but this time i need to set a part in mid air. I would like to use the move tool, but with exact xyz coordinates. I only seem to be able to do that with  an UCS (coordinate system), not the part itself. I guess it's just a button i'm missing somewhere.

View 2 Replies View Related

AutoCAD Inventor :: Assembly File Independent From Part Files

Jan 30, 2013

How can I make an assembly file independent from the part files that went into it? I tried converting it to STL then opening the STL document, but that causes problems with what I'm trying to accomplish.

View 4 Replies View Related

AutoCAD Inventor :: Copy Geometry From Assembly To Part File

Sep 9, 2012

I have an assembly with a few parts inside and want to create a new part(hose) in the assembly and link some faces from other parts within the assembly to my new part to show the routing of the hose.

Can I link faces within an assembly to one of the assembly components.

View 2 Replies View Related

AutoCAD Inventor :: Extract Part Locations From Assembly File

Nov 6, 2013

I am trying to extract part locations from an assembly file.  I've been successful UNTIL I come to a part/subAssembly where the workAxes is orientated differently then the overall assembly axis.  Is it possible to compare the local axis to the global axis?  If the answer is 'yes', can sample code be posted (i.e. dim sameOrientation as bool; sameOrientation = ... )?

Also, once I know that "sameOrientation = false," how would one convert local coordinates to global coordinates?

View 2 Replies View Related

AutoCAD Inventor :: 2013 - Assembly Will Not Accept Updated Part File Name

Nov 22, 2012

I am currently working on a school group project that requires me to submit all inventor files as "LASTNAME_FIRSTNAME_PART,ASSY,DRAWING,etc..NAME". My original parts were all done in mm instead of cm, so for our project, I opened all new files and derived the same parts at a different scale to fix this scale issue between the members. For the new derived parts I temporarily allowed the file name to remain as part1, part2, part3.... and continued with the assembly. Now that my assembly is complete and I would like to change my part file names to the required format, my assembly will not show the parts and (?) symbol is shown by all parts with updated file names. I also changed the original file names and now the new derived parts, when opened, have the same (?) which I assume is related to the fact that the derived parts are dependent on the original file. Is there a way to update this information? We are using INVENTOR 2013.

View 2 Replies View Related

AutoCAD Inventor :: ILogic For View Representation Of Part File (in Assembly)

Apr 17, 2012

I have received a great solution from Bobvdd allowing ilogic control of the view rep in a part file (not an assembly file). The code below works brilliantly when the part file is the active document. However when the part is placed in an assembly and the ilogic is run with the assembly active, the code produces no result. How to modify the top 6 lines of code?

Dim oApp As Inventor.Application
oApp = ThisApplication
Dim oDoc As Document

[Code]....

View 2 Replies View Related

AutoCAD Inventor :: Saving Part And Assembly File In Lower Version

Apr 27, 2012

I would like to save my inventor Part and Assembly model file in a lower version. Like in our company we use both Inventor 2012 and 2010. Once the file is created in 2012 and when shared to 2010 users they are unable to open, is there any possiblities to open 2012 files 2010 like how we do in Autocad.

View 2 Replies View Related

AutoCAD Inventor :: Thickness Of Each Of Layers In Assembly Are Generated From Part File

Dec 13, 2013

I have an assembly in which the thickness of each of the layers in an assembly are generated from a part file that is split via a sketch. I use the Make Components tool to break the part into the individual layers, which also spits out an assembly. 

Is there a way to push the thickness value of these parts that will update automatically if the thickness is changed in the parent part, in order to reference this property on the drawing?

View 6 Replies View Related

AutoCAD Inventor :: Creating Different Parametric Version Of Assembly From Master Part File?

Apr 24, 2013

I have created a parametric, multibody master part file to derive parts from it, and then put them in an assembly. See attached file. Now, I need 3 different versions of this setup (with different values of the parameter 'bending_angle').

What is the best way to do it? If I derive parts from it, they always follow the *actual* status of their master file. Is there some method to do this: "derive from this file, with parameter bending_angle=55deg", but keep the dependency relation, i.e. if I modify something on the master file, the derived part fill follow the modifications (with the value of bending_angle=55deg)

Inventor 2013

View 3 Replies View Related

AutoCAD Inventor :: Getting User Selection Within Part Edit Mode In Assembly File

Feb 24, 2013

I'm working on Autodesk VBA, and I'm trying to get user input on which vertex to use for a constrain. I want to make a macro that can go into part edit, allow user to select a vertex, and then automatically set up the constraint. Initially I wanted to do this in a single macro, using this short piece of code

while oSelectSet.Count <>1
DoEvents
Wend

While this worked when run directly from VBA, if I call it as a macro in Autodesk itself, the DoEvents doesn't seem o work because I wasn't able to make any selection at all. I googled and it seems like this is just how macros are.

So I split the code into a 2 subs and a function (as attached), and put them into separates rules that I call using a form in Autodesk. The first sub "Meta1Pin1_1" works, then I would select a vertex in edit mode. But when I go ahead and call the second sub "Meta1Pin1_2", I get the error message that I created which says no vertex is selected. But if I select a vertex and call the second sub again, it will work.

So I've been trying different things and I realize that every time when I first call the second sub, my selection is erased teh moment it goes into the sub. But, for some unknown reason, the selection will remain when I call it the second time. I can't figure out what exactly happened between the first and second call of the same sub, that allowed the selection to remain.  

' prepares assembly for user input by grounding bones and going into part edit
Public Sub Meta1Pin1_1()
Dim oDoc As AssemblyDocument

[Code]....

View 2 Replies View Related

AutoCAD Inventor :: Open A Assembly File / User Selects A Part / Plugin Automatically Runs

Feb 27, 2013

is it possible to write a plug in that runs when a user does something.example. you start inventor and open a assembly file the user selects a part and the plugin automatically runs.no pussing buttons, no quick key, it just runs.

View 2 Replies View Related

AutoCAD Inventor :: Link One Part File Dimension To Another Part File?

Jul 6, 2012

Is it possible to link one part file dimension to another part file?

1. Part first is a cylinder in parametric table i changed it,s name OD , ID  and thk. ( find attachment )

   Cylinder ID is ( ID=105)

2. Then i made 2 nd part whose step od ( od=102) is going to insert in to cylinder id.There is 3 mm clerance every time 

3. So i have to make equction in 2 nd part that ( Step OD= ( ID-3).

means next time when i will change ID of cylinder OD of 2 nd part will ger changed automatically minus by 3 mm than id of cylinder.

View 3 Replies View Related

AutoCAD Inventor :: Referencing Parts In Assembly?

Jan 18, 2013

I have a rather complex assembly that I didn't draft but I am trying to work with. Most of my experience is with Solidworks. I'm trying to create a hole in a plate that lines up with a hole in a different part in the same assembly. I know there is probably a way to create the hole in the assembly and reference the other part but I dont know how.

Autodesk Inventor 2009

View 2 Replies View Related

AutoCAD Inventor :: Run Ilogic Rule In Each Part From The Assembly Via External Rule

Dec 6, 2011

I want to simply set a custom iproperty as the Description in each part file within my assembly.  I can do this easily at part level with ilogic but I want to be able to run the rule from the assembly level and all the parts run the rule.  I am struggling to find a way to do this.

I think this may be the best method I have found but I think it must be far easier?

[URL].......

View 9 Replies View Related

AutoCAD Inventor :: Library Assembly Always Referencing To Save

Nov 28, 2012

We have an issue that I'm trying to work on and get a solution to move forward on a current project.  Previously when using a pneumatic cylinder, the procedure has been to set the stroke length as a permanent extrusion and not have it flexible.  I have created a few new cylinders that have flexible strokes, and then have positions set up as well.  We want these cylinders to be available for all projects and to be uneditable, essentially we need them in the library.  What is happening is when we place this part from the library and make it flexible in a project the assembly becomes dirty and is requesting to save the file before checking the main assembly back into the vault.  What am I doing wrong?  Is it not possible to have a library assembly file that is flexible in another project? 

Something similar to this website: [URL] ....

The only thing is having those hydraulics as library parts.

View 4 Replies View Related

AutoCAD Inventor :: How To Configure Assembly For Flexible Library Referencing

Jan 8, 2013

I'm going through some customer equipment models and setting them up in my library for referencing.  For example, I'll setup a machine that belongs to a customer, then reference it through a library when I design new tooling and/or components to work with existing equipment.

One such machine is a simple positioner.  It's got a linear slide for "X" movement that's got an arm on a mounting plate.  The slide has some amount of travel, say 500mm or so.  And the mounting plate has 5 sets of mounting holes.  So the arm can have four bolts removed and be mounted in any (1) of (5) different locations.  This is in addition to the slide's travel.

When I design future assemblies and components for this, I'd like to be able to insert the assembly from a library into my "new" assembly in a flexible configuration where I can set it up using any combination of mounting holes AND slide travel.

So I can setup (5) different positional reps for the mounting hole configs.  That's easy.  With respect to the slide, I can create a constraint that allows the arm to extend and retract, but how can I get the library assembly to "rest" in multiple locations?  For example, I may work on Design A that needs the extension at 241mm and Design B at 316mm.

Would I need to setup a different Pos Rep in the library assembly for the requirements of every new design? Unfortunately, the design is proprietary to the customer, so I really can't post anything about it.

Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1

View 2 Replies View Related

AutoCAD Inventor :: Insert STEP (STP) Part Into Existing Part File?

Sep 11, 2013

The simple question is… how can we insert a step (stp) part into an existing part file? 

The story behind the question is this:

Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file.  With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt.  The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.

The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.

Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013

View 1 Replies View Related

AutoCAD Civil 3D :: Drawing With Surface Still Referencing XML File

Feb 12, 2013

I have been provided survey data in the form of an XML file that I am using to build a surface.  Everything is fine, except for the drawing with the surface is still referencing the XML file.  What is the best method to remove this reference and have the surface fully contained in one file?  Using C3D 2012.

View 2 Replies View Related

AutoCAD Inventor :: How To Copy Part Of IPT Into Another Part File

Mar 15, 2013

I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.

View 2 Replies View Related

AutoCAD VB :: Extracting File Type Or Extension Of External Reference File?

Dec 2, 2013

Is their a way to know or extract the file type or file extension of an External Reference file?

View 3 Replies View Related

AutoCAD Inventor :: ILogic - Using External VB-File With Dynamic Name

Nov 2, 2011

I use Inventor 2010 with the iLogic Extension. My question is probably more VB.NEt-related than Inventor-related.

For my parts I usually have a main *.ipt that can receive input parameters and does some calculating with them. Then there are several 'slave' *.ipt that use the calculated parameters of the main.ipt. I would like to keep that structure. Using iLogic the slave.ipt's do some calculation, too, based on an external *.Vb-File. I load that file into the rules of the slave.ipts by using (for example) AddVbFile "External.Vb".

My question is if it is in any way possible to have it so that the name External.Vb can be dynamic? I tried using a new iLogic String parameter and storing the name of the external VB-File there so that I would have a Parameter Name = "External.Vb" and then use AddVbFile Name. But that sadly didn't work at all. My External.Vb is supposed to be unique for every copy of my assembly and having to write the correct name into the rule by hand is tedious.

View 2 Replies View Related

3ds Max :: File Referencing Pipline?

Dec 15, 2011

If max 2011 can set up a file referencing system for multiple artist to work simultaneously into a larger singular file. So a main scene contains all the information from multiple artists, and as they work on their individual pieces the main scene updates as each individual file is updated. I know i heard of a way in maya 2008, but that was over 3 years ago and can not remember what it was called.

View 3 Replies View Related

AutoCAD Inventor :: Call Form From External File In ILogic

Mar 26, 2012

I'm trying to find a way to call a form in a skeleton part file from within a parent assembly file.

I can open the form from the skeleton part, then leave it open and update values even while the skeleton part is inactive or even closed.  But I can't find out how to call it from the assembly file.  Is this possible?  I currently have to open the skeleton just to call up the form.

I can reference values or even add them in another form, but I am not allowed to change them in an assembly form, because they are (linked) reference parameters.

I have considered several workarounds, but this is how I really want it to work.  I'm just not that familiar with the code to know if there's a way around.  The code snippets only allow opening a form from the current document as far as I can see.  I don't really want a global from because I'm only changing parameters in one file, not all.

View 1 Replies View Related

AutoCAD Inventor :: Import IProperties Value From External Excel File

Dec 14, 2011

i have made a iLogic Module who, whit an external rules, import the iProperties value from an external exel file.The exel file is connected from SQL with the our managerial software.This in the external rule:

i = GoExcel.FindRow("Z:DISEGNI_INVENTORDescrizioni.xls", "Descrizioni", "Cod.Art.", "=", iProperties.Value ("Project", "Part Number"))iProperties.Value ("Project", "Description") = GoExcel.CurrentRowValue("Descr. Articolo Princ.")'iProperties.Value("Project", "Project")
[Code] .....

 It's work fine but i have same question. There is some string to refresh an iLogic Module? When i push the ruel button the rule add the custom value in iProperties, but there are disabled, i have close the module an reopen it for correct display the value of the iProperties.

this module work with single parts. Can I do an rule who do the same thing of my string but in one assembly, do this for every parts of assembly automaticly??

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved