If max 2011 can set up a file referencing system for multiple artist to work simultaneously into a larger singular file. So a main scene contains all the information from multiple artists, and as they work on their individual pieces the main scene updates as each individual file is updated. I know i heard of a way in maya 2008, but that was over 3 years ago and can not remember what it was called.
View 3 RepliesDescribe the external referencing of a part file by an assembly file? I keep getting confused between part file and an assembly file.
View 2 Replies View RelatedI have been provided survey data in the form of an XML file that I am using to build a surface. Everything is fine, except for the drawing with the surface is still referencing the XML file. What is the best method to remove this reference and have the surface fully contained in one file? Using C3D 2012.
View 2 Replies View RelatedI was trying out the referencing in 3dsmax and i noticed you cant select the object, is there a way to reference an entire scene and be able to do edits like maya? I know you could with containers but containers are only by objects.
View 1 Replies View RelatedAny way of creating a block attribute that will reference the z value of a separate 3d model (topographical survey) at a given point?
I know the z value of the block itself can be listed as a simple block attribute but I need the reference to check for the z value of an unlinked model which will be inserted/ x-reffed beneath the block.
I've been playing with Scene Referencing, and have a question about skinning. Is the ability to bind a mesh that is part of an Assembly Reference something that will be coming in a future release? I'd like to be able to bind both a high-poly and a low-poly mesh to one rig using scene assembly. That way I can swap armor parts, weapons, etc on one rig without cutting/pasting animation between rigs.
I've attached a picture of a sample of what I'm referring to. If that isn't workable, any other workflow that is comparable?
I have a rather complex assembly that I didn't draft but I am trying to work with. Most of my experience is with Solidworks. I'm trying to create a hole in a plate that lines up with a hole in a different part in the same assembly. I know there is probably a way to create the hole in the assembly and reference the other part but I dont know how.
Autodesk Inventor 2009
I have a master assembly containing three sub-assemblies 1, 2 & 3.I require 3 Drawings from this master assembly.
Drawing 1 showing master assembly, sub-assemblies 1 in full and 2 & 3 in reference.
Drawing 2 showing master assembly, sub-assemblies 2 in full and 1 & 3 in reference.
Drawing 3 showing master assembly, sub-assemblies 3 in full and 1 & 2 in reference.
This sounds so simple but is it possible?We have tried all manner of configurations with LOD.I'm not really keen on locking design views as the assemblies can change at any time.
I am trying to insert a text field into a block attribute and setting that field to display the information of an attribute in another block. What happens is that when I close the file and re-open it the text field loses its connection to the attribute that it is referencing.
Now, I have been able to make this work in the passed, however the difference now is that I am asking the text field to reference an attribute of an annotative block. That appears to be the reason it does not work.
How to make this work with annotative blocks? Is it a system variable I can change?
This happens on more than one document. A ueser showed me when she references in place, you just see the cursor spinning in a circle. Internet is NOT open, just Outlook.
View 4 Replies View RelatedOne day until final plot, and we have a project where 3/4 of the enlarged plan callouts and associated views have lost their "Referencing Sheet" and "Referencing Detail" information.
1. What could have caused this?
2. How to get it back, short of removing the affected views and recreating the sheets?
We make a small Animation Movie and from time to time we stumble upon strange behaviours of the referencing pipeline.
There is a Kitchen that will be the scenery for the Movie Scene Set up: all models i.e the toaster, the fridge ansd so on are modeled and saved.then in the Kitchen File we have an empty scene where all the objects are referenced in. thats the "model master"scene.now we referenced the toaster_model into toaster_shaded, did all the shading and changed the references in the kitchen from toaster_model to toaster_shaded.
On some objects we noticed, that the updates made on the models for examlpe if we scale up the toaster on 2 and freeze transforms afterwards, the change is not updated in the Kitchen file. But after a few days the update works...
System:
AMD x6 3.2Ghz
16gb Ram
Nvida GTX 460SE
In Revit 2012, I have a plan view (overall, first floor) which is "Independent" but also shows another view as the "Referencing Sheet." When I visit the sheets referenced, I can't identify a reference. The problem is that the "Referencing Sheet" is showing in our title block and we'd prefer to show a blank for Independent views.
View 1 Replies View RelatedI have an Map that was drawn in regular autoCAD drawn 1:1. I know the coordinate system that I need to assign to it and some known coordinate but how to I go about getting my current map to be correctly Geo-referenced.
Is there a way to tell AutoCAD map that a certain few points are at certain coordinates, and the rest falls into place?
Is there anyway to reference a form and its specific items in iLogic. For example, say I wanted to change a label on the form when the code ran. How would I do something like this?
Form1.Label1.Value = "SomeString" ?
I want to create a live instance of an existing FG-Profile that I somebody else did into our master profile drawing. Is there an easy way to do this? I don't want to data reference it in.
I tried exporting the FG-Profile information into a .txt file and then use the "create a profile from file", but for whatever reason C3D didn't like my profile info was giving me an error message.
We have an issue that I'm trying to work on and get a solution to move forward on a current project. Previously when using a pneumatic cylinder, the procedure has been to set the stroke length as a permanent extrusion and not have it flexible. I have created a few new cylinders that have flexible strokes, and then have positions set up as well. We want these cylinders to be available for all projects and to be uneditable, essentially we need them in the library. What is happening is when we place this part from the library and make it flexible in a project the assembly becomes dirty and is requesting to save the file before checking the main assembly back into the vault. What am I doing wrong? Is it not possible to have a library assembly file that is flexible in another project?
Something similar to this website: [URL] ....
The only thing is having those hydraulics as library parts.
I know I can use the expresion "$(getvar,ctab)" to reference the current layout tab name but is there a way to reference say the layout in previous or next tab in reference to the current tab. I am doing some plan and profile drawings which contain match lines I would like to have the match line text automated. For example if I'm on layout called PP02 there would be two match lines in the drawing one would read MATCH LINE PP01 and the other would read MATCH LINE PP03 I would like to automate this so the PP01 of PP02 is referencing the previous or next tab.
View 3 Replies View RelatedI have 50+ project sites scattered along a 600+ mile alignment. My alignment reference drawing coordinate system is set to a UTM coordinate system. My project site drawings are set to state plane coordinate systems. Does coordinate transformation automatically occur with data references?
View 1 Replies View RelatedWhen I try to reference an object in the Data Shortcuts menu, when I right-click the a profile in Prospector under Data Shortcuts, the option to "Create Reference..." is grayed out, and I am unable to reference that profile into the drawing I am working on. It works fine on other profiles that are being referenced from the same drawing.
I have tried:
1. Re-creating the alignment and profile data shortcut in the drawing being referenced
2. Creating a reference in my drawing to the alignment, which actually works. However, it still does not allow me to "create reference" for the profile.
3. Refreshing the data shortcuts.
4. Synchronizing the alignment referenced in the drawing.
Nothing seems to work. My only other option is to move the C3D profiles from the referenced drawing to the drawing I am working in. Is there a way to do this?
I have built a family and added various types; I have then nested this into my final family and would like to change the nested family type dependant on the final family’s type. (Hope that makes sense). I can do all of this until I want to make a catalogue.
This is what I did:
-Made a family and added types.
-Made a new family.
-Bought in the 1st family.
-Selected the nested family and added a parameter called "Attachment".
This all works fine I can change the type of the nested family in the edit type dialog box. But I need to make a type catalogue and when I export the family types as a txt document the attachment parameter doesn’t appear. So how do I reference this?
I have attached the RFA & TXT files.
I wish to create a formula for a family parameter which itself references a 'Type' of an imported family. Specifically I wish to create a quoin stack which can be used for a 'reveal' situation either side of a door or window rather than just on a corner. A 'quoin stack,' as that which comes with the revit content files, typically is made up of two vertical arrays which intersect giving alternative long and short sides. Each of the arrays is made up of a different quoin type, a 'Short' and a 'Long' type which swap dimensions from from perpendicular face to the other. This of course is no good for a reveal situation where on the window or door reveal of both interleived courses needs to be the same, whilst maintaining the 'long/short' appearance on the wall face containing the window or door.
I have got so far as to create a 'reveal depth' parameter within the quoin stack family but need to find a way of addressing the 'Long' quoin type to change its 'short' dimension to suit the reveal depth whilst changing the 'long' dimension of the 'Short' quoin type to be the same.
Having problems with *.3ds exports no longer referencing color/diffuse textures? All I get is a white square now. Everything works fine in 2012 (standard install)
View 9 Replies View RelatedI'm going through some customer equipment models and setting them up in my library for referencing. For example, I'll setup a machine that belongs to a customer, then reference it through a library when I design new tooling and/or components to work with existing equipment.
One such machine is a simple positioner. It's got a linear slide for "X" movement that's got an arm on a mounting plate. The slide has some amount of travel, say 500mm or so. And the mounting plate has 5 sets of mounting holes. So the arm can have four bolts removed and be mounted in any (1) of (5) different locations. This is in addition to the slide's travel.
When I design future assemblies and components for this, I'd like to be able to insert the assembly from a library into my "new" assembly in a flexible configuration where I can set it up using any combination of mounting holes AND slide travel.
So I can setup (5) different positional reps for the mounting hole configs. That's easy. With respect to the slide, I can create a constraint that allows the arm to extend and retract, but how can I get the library assembly to "rest" in multiple locations? For example, I may work on Design A that needs the extension at 241mm and Design B at 316mm.
Would I need to setup a different Pos Rep in the library assembly for the requirements of every new design? Unfortunately, the design is proprietary to the customer, so I really can't post anything about it.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
The need for a way to get a rebar schedule made referencing my Inventor parts. Like to know if you can create your concrete walls, slabs, beams etc... and either place rebar in these Inventor files and then create some type of rebar schedule (table?) or something. Or take the concrete walls, slabs, beams etc... and import into another Autodesk product like Revit and have this create the schedules and then export back to Inventor. Is any of this been done or possible? Want Inventor to have the end product.
View 3 Replies View RelatedWe have our first project in Revit that we are having to split among multiple sheets because of the size of the building, so I have made 3 dependent views from the main overall view, named them, cropped them and placed each part (A,B, and C) on separate sheets. Now that I am trying to do enlarged toilet plan views, I want to tag the plans with the plan callouts on the 1/8” sheets that are the dependent views, but all the view tags are referencing dependent view A since it is the first dependent view in the list. If I change sheet A to be named Sheet X for instance, all the view tags now reference sheet B since that becomes the first dependent view alphabetically. I want them to reference the sheet they appear in, but I can’t seem to figure out how to do that, even though they are in different dependent views completely and within the crop region, they all default to the first dependent view in alphabetical order.
View 4 Replies View RelatedI just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
I use Canon 60D and normally shoot in mRAW. I am considering a move to DNG conversion so I did some test conversions and was amazed to find that, far from reducing the size of my mRAW files, it increased them by about 60%. I repeated the exercise with RAW files and found that this did reduce the size of the files by over 10%. In fact, i ended up with the crazy situation where the DNG files converted from mRAW were much bigger than those converted from RAW.
Below are some sample sizes based on Medium previews, Embed fast load data - YES, Embed original RAW file - NO, Compatibility Camera Raw 7.1 and later
Before : mRAW 17Mb mRAW 12Mb
After: DNG 28.5Mb DNG 21Mb
Before: RAW 23Mb RAW 22Mb
After: DNG 20Mb DNG 19Mb
If I went for Full Preview, the DNG sizes rose by about 2 Mb
why the mRAW conversion is so inefficient?
I am still not entirely sure whether to adopt DNG but, if i do, it looks like I certainly won't be using mRAW as the source.
Have some photos of a warehouse fire in Plymouth Indiana. Files were saved as .jpg Can't get them to open.
One message is "Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently supported." Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
Carl Beason
Windows 7, Photoshop cs4
file info in Photoshop shows only an empty box yet works in bridge.
View 1 Replies View RelatedWhen I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
