AutoCAD Inventor :: Way To Get A Rebar Schedule Made Referencing Parts
Jul 18, 2013
The need for a way to get a rebar schedule made referencing my Inventor parts. Like to know if you can create your concrete walls, slabs, beams etc... and either place rebar in these Inventor files and then create some type of rebar schedule (table?) or something. Or take the concrete walls, slabs, beams etc... and import into another Autodesk product like Revit and have this create the schedules and then export back to Inventor. Is any of this been done or possible? Want Inventor to have the end product.
View 3 Replies
ADVERTISEMENT
Jan 18, 2013
I have a rather complex assembly that I didn't draft but I am trying to work with. Most of my experience is with Solidworks. I'm trying to create a hole in a plate that lines up with a hole in a different part in the same assembly. I know there is probably a way to create the hole in the assembly and reference the other part but I dont know how.
Autodesk Inventor 2009
View 2 Replies
View Related
Jan 9, 2012
How do you separate two objects that are considered to be the same body.
I have an car airbox made up of two separate solid objects. How can I separate them? see the attached image for a better understanding of my situation.
View 9 Replies
View Related
Oct 31, 2013
How to use different configuration of parts made with iLogoc in assembly? I want to have equal part with different configuration. I have a problem with the equal files.How to use different configuration of an assembly made with iLogic in assembly?
View 4 Replies
View Related
Jul 24, 2012
In autodesk inventor 2013 is there a file format (for example .igs, stl, solid works format, catia, pro/E format, etc) that when imported into inventor will appear with its detailed history tree? for example if I try to import a solid works part into inventor 2013 will it appear as one block or will it have its history tree showing the original sketch and other features that were used to make it? If all imported parts will appear as blocks in inventor 2013 regardless of there format, does this latest version of the software have tools similar to direct modeling software (such as KeyCreator) that make it easy to make changes to the 3D imported part, without having to completely remake the part in inventor? Are such tools in the inventor fusion 2013 software instead?
View 9 Replies
View Related
Oct 9, 2013
I'm trying to make a drawing of a assembly, and some of the parts were made in frame generator. When I try to make a section view the parts made in frame generator still show as whole instead of halved. Is there something that I need to toggle or vice versa so that this will not happen anymore?
View 4 Replies
View Related
Jan 4, 2012
in order to streamline some of my duties i wonder if theres a way to have a dynamic block not only that can change it's length and the dimension for that length (easy) but will also add features to the part. For example can one be made that when stretching its length that once it reaches a certain length automatically split into two sections and keep those 2 sections equal? Also can it be made to contain a tag that keeps track of the lengths as well as number of joints between sections multiplied by a constant?
View 1 Replies
View Related
May 1, 2013
I have a master assembly containing three sub-assemblies 1, 2 & 3.I require 3 Drawings from this master assembly.
Drawing 1 showing master assembly, sub-assemblies 1 in full and 2 & 3 in reference.
Drawing 2 showing master assembly, sub-assemblies 2 in full and 1 & 3 in reference.
Drawing 3 showing master assembly, sub-assemblies 3 in full and 1 & 2 in reference.
This sounds so simple but is it possible?We have tried all manner of configurations with LOD.I'm not really keen on locking design views as the assemblies can change at any time.
View 9 Replies
View Related
Jul 12, 2012
Attachment here.
I've got to create a dynamic block for Rebar, with symbols (which are blocks) at two end of the bar line can be changed scale follow annotation scale changes.
The problem is after I have stretch the linear grip to change the length of the rebar, if I change to another annotation scale, the sybol block auto jump to the original position, not at the ends of line as I expected. How to keep the symbols at ends?
View 0 Replies
View Related
Oct 8, 2013
Is there anyway to reference a form and its specific items in iLogic. For example, say I wanted to change a label on the form when the code ran. How would I do something like this?
Form1.Label1.Value = "SomeString" ?
View 2 Replies
View Related
Nov 28, 2012
We have an issue that I'm trying to work on and get a solution to move forward on a current project. Previously when using a pneumatic cylinder, the procedure has been to set the stroke length as a permanent extrusion and not have it flexible. I have created a few new cylinders that have flexible strokes, and then have positions set up as well. We want these cylinders to be available for all projects and to be uneditable, essentially we need them in the library. What is happening is when we place this part from the library and make it flexible in a project the assembly becomes dirty and is requesting to save the file before checking the main assembly back into the vault. What am I doing wrong? Is it not possible to have a library assembly file that is flexible in another project?
Something similar to this website: [URL] ....
The only thing is having those hydraulics as library parts.
View 4 Replies
View Related
Jan 8, 2013
I'm going through some customer equipment models and setting them up in my library for referencing. For example, I'll setup a machine that belongs to a customer, then reference it through a library when I design new tooling and/or components to work with existing equipment.
One such machine is a simple positioner. It's got a linear slide for "X" movement that's got an arm on a mounting plate. The slide has some amount of travel, say 500mm or so. And the mounting plate has 5 sets of mounting holes. So the arm can have four bolts removed and be mounted in any (1) of (5) different locations. This is in addition to the slide's travel.
When I design future assemblies and components for this, I'd like to be able to insert the assembly from a library into my "new" assembly in a flexible configuration where I can set it up using any combination of mounting holes AND slide travel.
So I can setup (5) different positional reps for the mounting hole configs. That's easy. With respect to the slide, I can create a constraint that allows the arm to extend and retract, but how can I get the library assembly to "rest" in multiple locations? For example, I may work on Design A that needs the extension at 241mm and Design B at 316mm.
Would I need to setup a different Pos Rep in the library assembly for the requirements of every new design? Unfortunately, the design is proprietary to the customer, so I really can't post anything about it.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 2 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Mar 30, 2012
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
View 9 Replies
View Related
May 2, 2013
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
View 4 Replies
View Related
Aug 21, 2012
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Aug 7, 2013
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
View 2 Replies
View Related
Dec 9, 2013
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
View 3 Replies
View Related
Jul 10, 2012
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
View 2 Replies
View Related
May 3, 2013
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 5 Replies
View Related
Dec 13, 2013
Describe the external referencing of a part file by an assembly file? I keep getting confused between part file and an assembly file.
View 2 Replies
View Related
Sep 22, 2011
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
View 2 Replies
View Related
Jul 25, 2012
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies
View Related
Jul 9, 2013
I would like to know if there is a way to have the Schedule as an I-Part parameter of a flange. I'm trying to create a custom flange for use in the content center and would like both size and ID to be picked from a drop down when placed into an assembly.
Since it's a flange not a pipe I can't use the standard tube & pipe authoring method.
View 8 Replies
View Related
Jan 15, 2013
I have created city/landscape artwork using photoshop line and box tools. If you go to URL... then click on the link that says (click here to view Gotham City) you will see one of the images I am talking about. Can this image be made to look the same in vector.
View 7 Replies
View Related
Sep 9, 2013
I am looking for a way to have the ok and apply button gray out until there is a valid selection made in the UI. How can we control if those 2 buttons are active or not?
View 2 Replies
View Related
Sep 3, 2012
I have made a building and would like to do some cam shots while doing a "walk" from room to room. Is this possible with a the cam on point of view angle? have tried it out with showcase but the keyframe animasjon only give me overview shots.
should i go for 3dmax or can i do it with inventor studio/showcase /publisher...
View 2 Replies
View Related
Oct 22, 2012
I have an assembly that changes daily and drawings made at each step of the way using .dwg format. The problem is, that when I add something to the assembly, it addes it to the drawings already made and as a result losses dims and notes that I made. Is there a way to set the dwgs so that all new items added to the model automaticly are no visible in the drawings that were already created. I spend a lot of time changing old drawing to what they used to be.
View 2 Replies
View Related
Sep 18, 2013
I'm editing someone's 2d inventor dwg, and want to show a part behind an object in the section that isn't currently showing (the part I want to show is on the model, in the appropriate level of detail referenced by the 2d view.)
I believe that the author turned the line visibility off. Is there a way to turn all line visibility back on in a 2d view?
View 7 Replies
View Related
Aug 29, 2012
I want to create frame made out of structural steel. In order to do that Invwentor is giving me no option but to make Layout Sketch (any other way?), which then i should use for inserting members. Now, when i want to creat layout it does not give me an option of assigning it to a work planes i created. It always sketches it in default XY plane. I need to create 3D layout that will follow several work planes i created. I tried selecting any of the other work planes before clicking on layout button but no luck.
solidworks 2010
View 4 Replies
View Related
May 8, 2013
I'm currently using the "Make components" feature to convert solid bodies into parts. This works great, but we use this method to construct angular roof structures, and after the parts have been made the parts have angular relationships to the .ipt files UCS co-ordinates. It would be very useful if I could align the longest edge of the part (Which is a timber truss) with the x axis in the model space and "lay" the plank flat on the X-Y plane.
View 1 Replies
View Related
